On Wed, 28 Sep 2005, Alex N wrote: > Hi, I looked in the archives and I didn't find any solutions to my problem. > I have a macally PHC-500BC USB/Firewire Enclosure. I'm working on > getting the USB working. > I put a Hard disk in there and it worked great with USB but Then I put > 2 different DVD drives (one was a burner, one was a DVDROM) and I get > the errors: > usb 2-2: new low speed USB device using uhci_hcd and address 9 > usb 2-2: device not accepting address 9, error -71 > > actually, I just updated my kernel to 2.6.13 (from 2.6.12) to see if > that would help, but it didn't, and now it seems to think that the > device is lowspeed (before it gave the same error code but it said it > was highspeed) > > any ideas?
See if Windows will work with the DVD drives. If it can't, return the enclosure. See if replacing the USB cable makes any difference. Make sure you plug it into a rear USB port, one directly on the motherboard, instead of one at the front of the computer case. Put the hard disk back in the enclosure and see if it's still working. Alan Stern ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
