Hello,
I recently bought a Razer Copperhead mouse.
When I boot the box the mouse is detected, but sometimes X can't use it.
cat /dev/input/(mice|mouse0) is also silent.
If I unplug replug the thing it starts working right away.
On warm boots the mouse always works (as far as I know). On cold boots
it sometimes works (when I get home from work it never does. If I just
pover off, then on really soon sometime it does.).
It's always detected according to the kernel logs.
Linux 2.6.15 (Debian)+nvidia binary driver
Shuttle SN25P XPC (nforce4)
I tried compiled in drivers and modules. It made no difference.
I appreciate any ideas.
Below some info about the system. Please tell me if it is lacking.
Thank you.
lsusb -v:
Bus 002 Device 002: ID 1532:0101
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x1532
idProduct 0x0101
bcdDevice 21.00
iManufacturer 1 Razer
iProduct 2 Razer Copperhead Laser Mouse
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bDescriptorType 2
wTotalLength 59
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 2 Mouse
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.00
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 73
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 2
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 0.01
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 47
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
:can't get debug descriptor: Protocol error
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0010 1x 16 bytes
bInterval 1
Device Status: 0x0000
(Bus Powered)
cat /proc/bus/usb/devices
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh=10
B: Alloc= 22/900 us ( 2%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15nv ohci_hcd
S: Product=OHCI Host Controller
S: SerialNumber=0000:00:02.0
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=1532 ProdID=0101 Rev=21.00
S: Manufacturer=Razer
S: Product=Razer Copperhead Laser Mouse
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=02 Driver=usbhid
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=2ms
I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=usbhid
E: Ad=82(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=480 MxCh=10
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.15nv ehci_hcd
S: Product=EHCI Host Controller
S: SerialNumber=0000:00:02.1
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=05 Cnt=01 Dev#= 3 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=058f ProdID=6361 Rev= 1.26
S: Manufacturer=
S: Product=USB Reader
S: SerialNumber=058F12M111B
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
lsmod:
Module Size Used by
fan 4676 0
button 6544 0
dm_mod 59640 8
it87 21732 0
eeprom 7056 0
lm85 33892 0
hwmon_vid 2624 2 it87,lm85
i2c_isa 4864 1 it87
fuse 39692 0
snd_ice1724 71076 0
snd_ice17xx_ak4xxx 4416 1 snd_ice1724
snd_ac97_codec 97184 1 snd_ice1724
snd_ac97_bus 2176 1 snd_ac97_codec
snd_ak4114 9280 1 snd_ice1724
snd_pcm_oss 54624 0
snd_mixer_oss 19840 1 snd_pcm_oss
usbhid 31620 0
usb_storage 35012 0
snd_pcm 91912 4
snd_ice1724,snd_ac97_codec,snd_ak4114,snd_pcm_oss
snd_timer 24900 1 snd_pcm
snd_page_alloc 11144 1 snd_pcm
snd_ak4xxx_adda 6656 2 snd_ice1724,snd_ice17xx_ak4xxx
snd_mpu401_uart 7552 1 snd_ice1724
snd_rawmidi 24736 1 snd_mpu401_uart
snd 53604 10
snd_ice1724,snd_ac97_codec,snd_ak4114,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_ak4xxx_adda,snd_mpu401_uart,snd_rawmidi
soundcore 9824 1 snd
psmouse 39172 0
floppy 61508 0
forcedeth 23812 0
rtc 12660 0
joydev 10176 0
evdev 9856 0
ide_cd 42756 0
ohci_hcd 36996 0
i2c_nforce2 6784 0
i2c_core 21776 5 it87,eeprom,lm85,i2c_isa,i2c_nforce2
ehci_hcd 48456 0
usbcore 143876 5 usbhid,usb_storage,ohci_hcd,ehci_hcd
cdrom 40608 1 ide_cd
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
