Hi folks,
My SmartMedia card reader is not working under kernel 2.6.14. It worked
without problems under previous kernels. The USB system is in working order
and accepts other devices.
I would really appreciate any advice on what to try to get this running.
Here's the dmesg output:
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
Vendor: Sandisk0 Model: ImageMate SDDR09 Rev: 0100
Type: Direct-Access ANSI SCSI revision: 00
usb 2-1: reset full speed USB device using uhci_hcd and address 7
usb 2-1: device descriptor read/64, error -32
usb 2-1: device descriptor read/64, error -32
usb 2-1: reset full speed USB device using uhci_hcd and address 7
usb 2-1: device descriptor read/64, error -32
usb 2-1: device descriptor read/64, error -32
usb 2-1: reset full speed USB device using uhci_hcd and address 7
usb 2-1: device not accepting address 7, error -32
usb 2-1: reset full speed USB device using uhci_hcd and address 7
usb 2-1: device not accepting address 7, error -32
usb 2-1: USB disconnect, address 7
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unable to read partition table
Attached scsi removable disk sdb at scsi3, channel 0, id 0, lun 0
Attached scsi generic sg1 at scsi3, channel 0, id 0, lun 0, type 0
usb-storage: device scan complete
usb 2-1: new full speed USB device using uhci_hcd and address 8
usb 2-1: device descriptor read/64, error -71
usb 2-1: device descriptor read/64, error -71
usb 2-1: new full speed USB device using uhci_hcd and address 9
usb 2-1: device descriptor read/64, error -71
usb 2-1: device descriptor read/64, error -71
usb 2-1: new full speed USB device using uhci_hcd and address 10
usb 2-1: device not accepting address 10, error -71
usb 2-1: new full speed USB device using uhci_hcd and address 11
usb 2-1: device not accepting address 11, error -71
____________________
Rollo Gleeson
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
