Dear sir,
I'm developing a USB2.0 solution on FPGA, and I'm now coding the SIE part,
but I've a problem in the time constrain {T WTREV} as it's required to be
from 3.0 to 3.125 msec, and it should be > 3.0 msec , and must not exceed
3.125, as my PHY is 60 MHZ , and it can be only guranteed with 10% , so to
make sure that the first part of the condition realized then the counter
should be based on the worset case (66 MHZ --> counter_limit=198,000 or more)
And to conform to the second part of the condition(3.125msec), then we must
design the counter_limit value based on the 54MHZ clock, which leads to the
condition of (counter_limit = 168,750 or less) ???!!!!
So,what can I do ?????!!!!!!! ..... PLEASE HELP
Please reply as soon as you can.
Thank you and best regards
Eng. Rania Ahmed Ali El-Morsy
Senior design engineer @ Wissam electronics Industries
Co. Tel : +2 02 3475820 - +2 02 3475610
Fax no. : +2 02 3477210
Mobile : 012 5026520
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
