I'm trying to figure out how to get this drive to mount properly.
First problem is that it's hybrid - it acts like a CD plus a HDD - which
means, I believe, that I need to enable CONFIG_SCSI_MULTI_LUN in my kernel
and reboot. In the mean time, I need to pay attention to dmesg and do this:
echo >/proc/scsi/scsi "scsi add-single-device ${SCSI_ID} 0 0 1"
(I'm up to SCSI_ID 12 now...). Then dmesg shows:
Vendor: DMI Model: USB2.0 Storage Rev: 1.15
Type: Direct-Access ANSI SCSI revision: 00
sd 12:0:0:1: Attached scsi disk sdb
sd 12:0:0:1: Attached scsi generic sg2 type 0
Unfortunately, even though I suspect there to be something in there, I don't
see that I get sdb1 (which the manuals claim should be there by the fact that
Windows should be able to just plug and play without formatting...).
fdisk /dev/sdb doesn't work either, giving me "Unable to read /dev/sdb" - so I
don't think simply reformatting it will help.
lsusb gives (excluding other devices):
Bus 001 Device 031: ID 0c0b:b311 Dura Micro, Inc. (Acomdata)
If anyone has a hint for where I can look further, it would be appreciated.
Thanks,
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
