I have a 2Wire Homeportal 1000SW, which is a dsl modem/router connected by
a usb cable. Because I do not know which class this device falls under, I
have installed the following modules:
Module Size Used by
ndiswrapper 171732 0
plusb 2176 0
kaweth 17152 0
pegasus 23056 0
zaurus 4736 0
rtl8150 10112 0
rndis_host 5760 0
cdc_ether 6144 2 zaurus,rndis_host
net1080 6528 0
gl620a 3456 0
cxacru 11648 0
speedtch 15632 0
ueagle_atm 27432 0
cdc_subset 3200 0
catc 9856 0
asix 11136 0
usbnet 14216 8
plusb,zaurus,rndis_host,cdc_ether,net1080,gl620a,cdc_subset,asix
xusbatm 7828 0
usbatm 17792 4 cxacru,speedtch,ueagle_atm,xusbatm
cdc_acm 11040 0
The lsusb information on this device is as follows:
Device: ID 1630:0042
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.01
bDeviceClass 2 Communications
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x1630
idProduct 0x0042
bcdDevice 1.00
iManufacturer 1 2Wire Inc
iProduct 2 2Wire USB Remote NDIS Ethernet
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 67
bNumInterfaces 2
bConfigurationValue 1
iConfiguration 4 2WIREHPL
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 40mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 2 Communications
bInterfaceSubClass 2 Abstract (modem)
bInterfaceProtocol 255 Vendor Specific (MSFT RNDIS?)
iInterface 5 ndis5
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 1
CDC Header:
bcdCDC 1.00
CDC Call Management:
bmCapabilities 0x00
bDataInterface 1
CDC ACM:
bmCapabilities 0x00
CDC Union:
bMasterInterface 0
bSlaveInterface 1
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 1
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 10 CDC Data
bInterfaceSubClass 0 Unused
bInterfaceProtocol 0
iInterface 6 ethernet
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x03 EP 3 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type None
Usage Type Data
wMaxPacketSize 0x0040 1x 64 bytes
bInterval 0
Device Status: 0x0001
Self Powered
I installed ndiswrapper because the device uses rndis and works under Windows.
I would greatly appreciate any help in creating and configuring an interface
to use with this device.
Thanks in advance,
Mark
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
