Hi all,
I am experiencing strange problems with the above mouse. It is a 'it
works once or twice' thing: The machine boots, everything is recognized
alright, X is started, I can logon and work and everything is fine. But
logging off from the X session or just switching to a text console kills
the mouse and I can not use it again without rebooting. Note further
that this does not necessarily happen the first time but maybe only the
second or third.
I checked the list archive but have not been able to find anything, so
any help is highly appreciated!
The system details are as follows:
Distribution: Debian 2.2
System: Linux 2.4.2-ac18 i686 unknown or Linux 2.4.2-ac17 i686 unknown
C library: C library 2.2-5
C compiler: 2.95.2
Hardware is an ASUS K7V motherboard (VIA chip set), BIOS versions
1008.01c/1008.01d
I have been using a USB scanner for about half a year without a problem.
I think the problem might perhaps be that the USB subsystem initialises
the mouse correctly on boot with 1.5 MB/s but tries to use 12 MB/s on
later attempts which fails. But maybe I am totally wrong here...
Best regards,
Andree
--- T H E D E T A I L S ---
=================================================================================================
The machine boots and everything seems fine:
Linux version 2.4.2-ac18 (root@aurich) (gcc version 2.95.2 20000220
(Debian GNU/Linux)) #2 Sun Mar 11 19:38:43 EST 2001
BIOS-provided physical RAM map:
BIOS-e820: 00000000000a0000 @ 0000000000000000 (usable)
BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved)
BIOS-e820: 000000000feec000 @ 0000000000100000 (usable)
BIOS-e820: 0000000000003000 @ 000000000ffec000 (ACPI data)
BIOS-e820: 0000000000010000 @ 000000000ffef000 (reserved)
BIOS-e820: 0000000000001000 @ 000000000ffff000 (ACPI NVS)
BIOS-e820: 0000000000010000 @ 00000000ffff0000 (reserved)
On node 0 totalpages: 65516
zone(0): 4096 pages.
zone(1): 61420 pages.
zone(2): 0 pages.
Kernel command line: auto BOOT_IMAGE=linux ro root=302
BOOT_FILE=/vmlinuz idebus=33 video=matrox:vesa:0x193 hdc=ide-scsi
hdd=ide-scsi
ide_setup: idebus=33
ide_setup: hdc=ide-scsi
ide_setup: hdd=ide-scsi
Initializing CPU#0
Detected 700.035 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1395.91 BogoMIPS
Memory: 255700k/262064k available (935k kernel code, 5980k reserved,
255k data, 204k init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 0081f9ff c0c1f9ff 00000000, vendor = 2
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After vendor init, caps: 0081f9ff c0c1f9ff 00000000 00000000
CPU: After generic, caps: 0081f9ff c0c1f9ff 00000000 00000000
CPU: Common caps: 0081f9ff c0c1f9ff 00000000 00000000
CPU: AMD-K7(tm) Processor stepping 02
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.37 (20001109) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xf0fa0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
PCI: Using IRQ router VIA [1106/0686] at 00:04.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.14)
Starting kswapd v1.8
mtrr: type mismatch for d8000000,8000000 old: write-back new:
write-combining
rivafb: unable to setup MTRR
Console: switching to colour frame buffer device 80x30
rivafb: PCI nVidia NV16 framebuffer ver 0.9.2a (GeForce2-MX, 32MB @
0xD8000000)
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
block: queued sectors max/low 169765kB/56588kB, 512 slots per queue
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes
VP_IDE: IDE controller on PCI bus 00 dev 21
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a (rev 22) IDE UDMA66 controller on pci00:04.1
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST320423A, ATA DISK drive
hdc: RICOH CD-R/RW MP7120A, ATAPI CD/DVD-ROM drive
hdd: Pioneer DVD-ROM ATAPIModel DVD-115 0122, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 40011300 sectors (20486 MB) w/512KiB Cache, CHS=2490/255/63,
UDMA(66)
Partition check:
hda: hda1 hda2 hda3 hda4 < hda5 hda6 hda7 hda8 hda9 hda10 hda11 >
SCSI subsystem driver Revision: 1.00
PCI: Found IRQ 12 for device 00:0a.0
PCI: The same IRQ used for device 00:04.5
sym53c8xx: at PCI bus 0, device 10, function 0
sym53c8xx: setting PCI_COMMAND_PARITY...(fix-up)
sym53c8xx: 53c875 detected
sym53c875-0: rev 0x26 on pci bus 0 device 10 function 0 irq 12
sym53c875-0: ID 7, Fast-20, Parity Checking
scsi0 : sym53c8xx-1.7.3a-20010304
Vendor: IBM Model: DCAS-34330 Rev: S65A
Type: Direct-Access ANSI SCSI revision: 02
Vendor: IOMEGA Model: ZIP 100 Rev: E.08
Type: Direct-Access ANSI SCSI revision: 02
Attached scsi disk sda at scsi0, channel 0, id 4, lun 0
Attached scsi removable disk sdb at scsi0, channel 0, id 5, lun 0
sym53c875-0-<4,*>: FAST-20 SCSI 20.0 MB/s (50.0 ns, offset 15)
SCSI device sda: 8467200 512-byte hdwr sectors (4335 MB)
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
sym53c875-0-<5,*>: target did not report SYNC.
sym53c875-0-<5,*>: target did not report SYNC.
sym53c875-0-<5,*>: target did not report SYNC.
sym53c875-0-<5,*>: target did not report SYNC.
sym53c875-0-<5,*>: target did not report SYNC.
sdb : READ CAPACITY failed.
sdb : status = 1, message = 00, host = 0, driver = 28
sdb : extended sense code = 2
sdb : block size assumed to be 512 bytes, disk size 1GB.
sdb: I/O error: dev 08:10, sector 0
unable to read partition table
Linux PCMCIA Card Services 3.1.22
options: [pci] [cardbus] [pm]
usb.c: registered new driver hub
PCI: Found IRQ 5 for device 00:04.2
PCI: The same IRQ used for device 00:04.3
PCI: The same IRQ used for device 00:0d.0
uhci.c: USB UHCI at I/O 0xd400, IRQ 5
uhci.c: detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
usb.c: kmalloc IF c14e37c0, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB UHCI-alt Root Hub
SerialNumber: d400
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface c14e37c0
usb.c: call_policy add, num 1 -- no FS yet
PCI: Found IRQ 5 for device 00:04.3
PCI: The same IRQ used for device 00:04.2
PCI: The same IRQ used for device 00:0d.0
uhci.c: USB UHCI at I/O 0xd000, IRQ 5
uhci.c: detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
usb.c: kmalloc IF c14e39c0, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 2 default language ID 0x0
Product: USB UHCI-alt Root Hub
SerialNumber: d000
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface c14e39c0
usb.c: call_policy add, num 2 -- no FS yet
usb.c: registered new driver hid
usb.c: registered new driver usbscanner
scanner.c: USB Scanner support registered.
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
uhci.c: root-hub INT complete: port1: 58a port2: 49b data: 6
hub.c: port 1 connection change
hub.c: port 1, portstatus 300, change 3, 1.5 Mb/s
hub.c: port 2 connection change
hub.c: port 2, portstatus 101, change 3, 12 Mb/s
ds: no socket drivers loaded!
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 204k freed
hub.c: port 2, portstatus 103, change 0, 12 Mb/s
hub.c: USB new device connect on bus1/2, assigned device number 3
usb.c: kmalloc IF c14e3d40, numif 1
uhci.c: root-hub INT complete: port1: 58a port2: 58a data: 6
usb.c: new device strings: Mfr=0, Product=0, SerialNumber=0
hub.c: USB hub found
hub.c: 4 ports detected
hub.c: standalone hub
hub.c: individual port power switching
hub.c: individual port over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 100ms
hub.c: hub controller current requirement: 100mA
hub.c: port removable status: RRRR
hub.c: local power source is good
hub.c: no ove_-current condition exists
hub.c: enabling power on all ports
uhci.c: root-hub INT complete: port1: 588 port2: 495 data: 2
usb.c: hub driver claimed interface c14e3d40
usb.c: kusbd: /sbin/hotplug add 3
usb.c: kusbd policy returned 0xfffffffe
hub.c: port 1 connection change
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
uhci.c: root-hub INT complete: port1: 58a port2: 58a data: 6
hub.c: port 1, portstatus 103, change 10, 12 Mb/s
hub.c: USB new device connect on bus1/2/1, assigned device number 4
usb.c: kmalloc IF c14e3e80, numif 1
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0
usb.c: USB device number 4 default language ID 0x409
Manufacturer: EPSON
Product: Perfection610
usb.c: usbscanner driver claimed interface c14e3e80
usb.c: kusbd: /sbin/hotplug add 4
usb.c: kusbd policy returned 0xfffffffe
hub.c: port 3 connection change
hub.c: port 3, portstatus 301, change 1, 1.5 Mb/s
hub.c: port 3, portstatus 303, change 10, 1.5 Mb/s
hub.c: USB new device connect on bus1/2/3, assigned device number 5
uhci.c: root-hub INT complete: port1: 588 port2: 495 data: 2
usb.c: kmalloc IF c14e3f40, numif 1
usb.c: skipped 1 class/vendor specific interface descriptors
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0
usb.c: USB device number 5 default language ID 0x409
Manufacturer: KYE
Product: Genius USB Wheel Mouse
mouse0: PS/2 mouse device for input0
input0: USB HID v1.00 Mouse [KYE Genius USB Wheel Mouse] on usb1:5.0
usb.c: hid driver claimed interface c14e3f40
usb.c: kusbd: /sbin/hotplug add 5
usb.c: kusbd policy returned 0xfffffffe
uhci.c: root-hub INT complete: port1: 58a port2: 58a data: 6
hub.c: port 1 connection change
hub.c: port 1, portstatus 300, change 3, 1.5 Mb/s
hub.c: port 2 connection change
hub.c: port 2, portstatus 300, change 3, 1.5 Mb/s
uhci.c: root-hub INT complete: port1: 588 port2: 495 data: 2
hub.c: port 1 enable change, status 300
uhci.c: root-hub INT complete: port1: 588 port2: 588 data: 6
hub.c: port 1 enable change, status 300
hub.c: port 2 enable change, status 300
Adding Swap: 610428k swap-space (priority -1)
i2c-core.o: i2c core module
i2c-viapro.o version 2.5.5 (20010115)
i2c-core.o: adapter SMBus vt82c596 adapter at e800 registered as adapter
0.
i2c-viapro.o: vt82c596 bus detected and initialized
sensors.o version 2.5.5 (20010115)
w83781d.o version 2.5.5 (20010115)
i2c-core.o: driver W83781D sensor driver registered.
i2c-core.o: client [W83782D chip] registered to adapter [SMBus vt82c596
adapter at e800](pos. 0).
i2c-core.o: client [W83782D subclient] registered to adapter [SMBus
vt82c596 adapter at e800](pos. 1).
i2c-core.o: client [W83782D subclient] registered to adapter [SMBus
vt82c596 adapter at e800](pos. 2).
ne2k-pci.c:v1.02 10/19/2000 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
PCI: Found IRQ 5 for device 00:0d.0
PCI: The same IRQ used for device 00:04.2
PCI: The same IRQ used for device 00:04.3
eth0: RealTek RTL-8029 found at 0x9800, IRQ 5, 52:54:05:F7:38:7E.
Real Time Clock Driver v1.10d
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: RICOH Model: CD-R/RW MP7120A Rev: 1.10
Type: CD-ROM ANSI SCSI revision: 02
Vendor: PIONEER Model: DVD-ROM DVD-115 Rev: 1.22
Type: CD-ROM ANSI SCSI revision: 02
Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
mtrr: type mismatch for d8000000,2000000 old: write-back new:
write-combining
Undo loss 129.250.186.11/21 c2 l0 ss2/2 p0
=================================================================================================
When logging off from X or switching to a text console the following
happens:
Mar 12 18:35:13 aurich kernel: hub.c: port 3 connection change
Mar 12 18:35:13 aurich kernel: hub.c: port 3, portstatus 100, change 1,
12 Mb/s
Mar 12 18:35:13 aurich kernel: usb.c: USB disconnect on device 5
Mar 12 18:35:13 aurich kernel: usb.c: kusbd: /sbin/hotplug remove 5
Mar 12 18:35:13 aurich kernel: usb.c: kusbd policy returned 0xfffffffe
Mar 12 18:35:13 aurich kernel: hub.c: port 3 connection change
Mar 12 18:35:13 aurich kernel: hub.c: port 3, portstatus 301, change 1,
1.5 Mb/s
Mar 12 18:35:13 aurich kernel: hub.c: port 3, portstatus 303, change 10,
1.5 Mb/s
Mar 12 18:35:13 aurich kernel: hub.c: USB new device connect on
bus1/2/3, assigned device number 6
Mar 12 18:35:13 aurich kernel: usb.c: kmalloc IF c14e3fc0, numif 1
Mar 12 18:35:13 aurich kernel: usb.c: skipped 1 class/vendor specific
interface descriptors
Mar 12 18:35:13 aurich kernel: usb.c: new device strings: Mfr=1,
Product=2, SerialNumber=0
Mar 12 18:35:13 aurich kernel: usb.c: USB device number 6 default
language ID 0x409
Mar 12 18:35:13 aurich kernel: Manufacturer: KYE
Mar 12 18:35:13 aurich kernel: Product: Genius USB Wheel Mouse
Mar 12 18:35:13 aurich kernel: mouse0: PS/2 mouse device for input0
Mar 12 18:35:13 aurich kernel: input0: USB HID v1.00 Mouse [KYE Genius
USB Wheel Mouse] on usb1:6.0
Mar 12 18:35:13 aurich kernel: usb.c: hid driver claimed interface
c14e3fc0
Mar 12 18:35:13 aurich kernel: usb.c: kusbd: /sbin/hotplug add 6
Mar 12 18:35:13 aurich kernel: usb.c: kusbd policy returned 0xfffffffe
Mar 12 18:35:20 aurich kernel: hub.c: port 3 connection change
Mar 12 18:35:20 aurich kernel: hub.c: port 3, portstatus 301, change 1,
1.5 Mb/s
Mar 12 18:35:20 aurich kernel: usb.c: USB disconnect on device 6
Mar 12 18:35:20 aurich kernel: usb.c: kusbd: /sbin/hotplug remove 6
Mar 12 18:35:20 aurich kernel: usb.c: kusbd policy returned 0xfffffffe
Mar 12 18:35:20 aurich kernel: hub.c: port 3, portstatus 100, change 11,
12 Mb/s
Mar 12 18:35:20 aurich kernel: hub.c: port 3 of hub 3 not enabled,
trying reset again...
Mar 12 18:35:20 aurich kernel: hub.c: port 3, portstatus 100, change 11,
12 Mb/s
Mar 12 18:35:20 aurich kernel: hub.c: port 3 of hub 3 not enabled,
trying reset again...
Mar 12 18:35:21 aurich kernel: hub.c: port 3, portstatus 100, change 11,
12 Mb/s
Mar 12 18:35:21 aurich kernel: hub.c: port 3 of hub 3 not enabled,
trying reset again...
Mar 12 18:35:21 aurich kernel: hub.c: port 3, portstatus 100, change 11,
12 Mb/s
Mar 12 18:35:21 aurich kernel: hub.c: port 3 of hub 3 not enabled,
trying reset again...
Mar 12 18:35:21 aurich kernel: hub.c: port 3, portstatus 100, change 11,
12 Mb/s
Mar 12 18:35:21 aurich kernel: hub.c: port 3 of hub 3 not enabled,
trying reset again...
Mar 12 18:35:21 aurich kernel: hub.c: Cannot enable port 3 of hub 3,
disabling port.
Mar 12 18:35:21 aurich kernel: hub.c: Maybe the USB cable is bad?
Mar 12 18:35:21 aurich kernel: hub.c: port 3 connection change
Mar 12 18:35:21 aurich kernel: hub.c: port 3, portstatus 100, change 11,
12 Mb/s
Mar 12 18:35:21 aurich kernel: hub.c: port 3 reset change
--
Dr Andree Leidenfrost, IT Consultant
Harms Consulting Pty Ltd
PO Box 643 Bondi Junction NSW 1355 Australia
Phone +61 2 9365 0361, Fax +61 2 9300 9386
Mobile +61 419 032 968
www.harmsconsulting.com
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-users
