----- Original Message -----
From: "Marchetti" <[EMAIL PROTECTED]>
To: "Greg KH" <[EMAIL PROTECTED]>
Sent: Friday, March 16, 2001 10:51 AM
Subject: Re: [Linux-usb-users] Problem
> First I've pointed the modem program to /dev/usb/ttyUSB0 (and USB1) then i
> tryed to link my modem to the file by using ln -s -f /dev/usb/ttyUSB0
modem
> and using this link in kppp program but in both cases the program tell me
it
> cannot query the modem.I know my modem is recognized, cause if i use USB
> viewer it's showed up with all its features, but there isn't dev where is
> attached to.
> THx for each answer
> ----- Original Message -----
> From: "Greg KH" <[EMAIL PROTECTED]>
> To: "Marchetti" <[EMAIL PROTECTED]>
> Cc: <[EMAIL PROTECTED]>
> Sent: Thursday, March 15, 2001 7:32 PM
> Subject: Re: [Linux-usb-users] Problem
>
>
> > On Thu, Mar 15, 2001 at 12:39:14PM +0100, Marchetti wrote:
> > > I've installed a Mandrake 7.2 on my computer, and a i have Zyxel
> > > Omni.net USB ISDN Adapter. My system recognize the modem (it also
> > > enable power output to it), but i cannot make recognize it as a modem
> > > (or i'm not able to do that).Please i know it's a stupid question but
> > > this is the first time i try install a Linux System
> >
> > Have you read the information in the Linux USB Guide at:
> > http://www.linux-usb.org/
> >
> > You need to point your modem program at the modem connection, which
> > should be /dev/ttyUSB0. This sounds more like a problem with
> > configuring pppd or whatever you use for dialing, than a USB problem.
> >
> > Good luck,
> >
> > greg k-h
> >
> > --
> > greg@(kroah|wirex).com
>
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-users
