Has anyone gotten the Belking omniview USB KVM and the Logitech iTouch
wireless keyboard and mouse to work? I don't think it is recognizing the
devices.. Im using RH 7 with the 2.2.18 kernel.
I am getting an unknown device using usbview and it is not recognizing the
logitech mouseman wheel mouse that is plugged directly into the machine
either (two mice, one through Belkin KVM, the other direct).
I compiled in everything I needed I believe, I am not using modules for
HID stuff.

This board is using the PIIx3 chip and the OHCI driver (non-alternate) if
that helps any..

Any help would be appreciated.

Sean

This is the dmesg output.
--
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.232 $ time 15:28:02 Feb  5 2001
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: Intel USB controller: setting latency timer to 0
usb-uhci.c: USB UHCI at I/O 0x6000, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
usb.c: USB new device connect, assigned device number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: USB new device connect, assigned device number 2
usb-uhci-debug.h:   TD @ c383b7e0/0383B7E0, MaxLen=07 DT0 EP=0 Dev=0
PID=(SETUP) buf=03ffbe20
usb-uhci-debug.h:     Len=07 e0 SPD Stalled CRC/Timeo
usb-uhci-debug.h:     Link points to TD @ 0383b820, Breadth first
usb.c: USB device not accepting new address (error=-110)

------
[root@phish usb]# cat devices
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB UHCI Root Hub
S:  SerialNumber=6000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= -1 Spd=12  MxCh= 0
D:  Ver= 0.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  0
P:  Vendor=0000 ProdID=0000 Rev= 0.00


--------
[root@phish usb]# cat drivers
         hub
         usbdevfs
[root@phish usb]#

----



_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-users

Reply via email to