Hello
I've been having problem mounting a TEAC USB CD-WE54E CDRW on
an Advantech 5820 (single board computer), on Red Hat 7.0, using 2.4.3
I have enabled SCSI Devices, SCSI CDROM support,USB Mass Storage, USB DEVFS,
and OHCI support
The USB hub is being registered, as can me seen from dmesg
//Dmesg
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 15 for device 00:13.0
usb-ohci.c: USB OHCI at membase 0xc2802000, IRQ 15
usb-ohci.c: usb-00:13.0, Compaq Computer Corporation USB Open Host
Controller
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
However
the following messages are confusing
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: USB device not accepting new address=2 (error=-110)
hub.c: USB new device connect on bus1/1, assigned device number 3
usb.c: USB device not accepting new address=3 (error=-110)
Mounting the device with
mount /dev/scd0 /mnt/cdr
causes the following error is displayed
"wrong major or minor device number"
If I boot Windows 98 on the same computer, I can see/use the TEAC CD-RW, so
i know the hardware is functional.
Any help would be appreciated.
Tony Cappellini
Maxtor Corporation
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-users
