I have a hard time making my Visor sync with my computer since I upgrade
to 2.4.4, in 2.4.3 it was working well, but not in 2.4.4. After my first
reboot with a new kernel the first thing that I alway's check is if my
USB device are working, my Visor started to sync with jpilot but it was
really long and then he lost connection, I wasn't able to start a sync
after that with jpilot and neither with pilot-xfer. By the way my
digital camera (Kodak DC5000) is still working just fine. It's on a Dell
420 Workstation SMP capable, but running on 1 processor so I have a NON
SMP kernel, look down for more details.
Here some debug example, one time on dmesg it did that(it did the
uhci.c: uhci_result_interrupt/bulk() failed with status 440000 one time
I wasn't able to recreate it):
hub.c: port 2 enable change, status 100
uhci.c: root-hub INT complete: port1: 80 port2: 93 data: 4
hub.c: port 2 connection change
hub.c: port 2, portstatus 101, change 1, 12 Mb/s
hub.c: port 2, portstatus 103, change 0, 12 Mb/s
hub.c: USB new device connect on bus1/2, assigned device number 11
usb.c: kmalloc IF c565f280, numif 1
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0
usb.c: USB device number 11 default language ID 0x409
Manufacturer: Handspring Inc
Product: Handspring Visor
usbserial.c: Handspring Visor converter detected
visor.c: Handspring Visor: Number of ports: 2
visor.c: Handspring Visor: port 1, is for Generic use and is bound to
ttyUSB0
visor.c: Handspring Visor: port 2, is for HotSync use and is bound to
ttyUSB1
usbserial.c: Handspring Visor converter now attached to ttyUSB0 (or
usb/tts/0 for devfs)
usbserial.c: Handspring Visor converter now attached to ttyUSB1 (or
usb/tts/1 for devfs)
usb.c: serial driver claimed interface c565f280
usb.c: kusbd: /sbin/hotplug add 11
uhci.c: root-hub INT complete: port1: 80 port2: 8a data: 4
hub.c: port 2 connection change
hub.c: port 2, portstatus 100, change 3, 12 Mb/s
usb.c: USB disconnect on device 11
usbserial.c: Handspring Visor converter now disconnected from ttyUSB0
usb.c: serial driver claimed interface c3d99ac0
usb.c: kusbd: /sbin/hotplug add 9
uhci.c: uhci_result_interrupt/bulk() failed with status 440000
[c7f090c0] link (07f09092) element (07f0c1e0)
0: [c7f0c1e0] link (00000001) e0 SPD Stalled CRC/Timeo Length=7ff
MaxLen=3f DT0 EndPt=2 Dev=9, PID=69(IN) (buf=03b886e0)
uhci.c: root-hub INT complete: port1: 80 port2: 8a data: 4
hub.c: port 2 connection change
hub.c: port 2, portstatus 100, change 3, 12 Mb/s
usb.c: USB disconnect on device 9
uhci.c: uhci_result_control() failed with status 440000
[c7f090c0] link (07f09062) element (07f0c1e0)
0: [c7f0c1e0] link (07f0c3f0) e0 Stalled CRC/Timeo Length=7 MaxLen=7
DT0 EndPt=0 Dev=9, PID=2d(SETUP) (buf=03d99fa0)
1: [c7f0c3f0] link (07f0c420) e3 SPD Active Length=0 MaxLen=f DT1
EndPt=0 Dev=9, PID=69(IN) (buf=03d99f80)
2: [c7f0c420] link (07f0c450) e3 SPD Active Length=0 MaxLen=1 DT0
EndPt=0 Dev=9, PID=69(IN) (buf=03d99f90)
3: [c7f0c450] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1
EndPt=0 Dev=9, PID=e1(OUT) (buf=00000000)
usbserial.c: Handspring Visor converter now disconnected from ttyUSB0
usbserial.c: Handspring Visor converter now disconnected from ttyUSB1
usb.c: kusbd: /sbin/hotplug remove 9
/sbin/lsmod
Module Size Used by
NVdriver 629104 12
emu10k1 44528 0
visor 8160 0
usbserial 16768 6 [visor]
dc2xx 3744 0
###############
cat /proc/bus/usb/drivers
usbdevfs
hub
usb-storage
80- 95: dc2xx
serial
################
cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=ff80
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 14 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs= 1
P: Vendor=082d ProdID=0100 Rev= 1.00
S: Manufacturer=Handspring Inc
S: Product=Handspring Visor
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 4 Cls=ff(vend.) Sub=00 Prot=00 Driver=serial
E: Ad=81(I) Atr=02(Bulk) MxPS= 16 Ivl= 10ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 16 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
#################
/sbin/lspci -v
00:00.0 Host bridge: Intel Corporation 82840 840 (Carmel) Chipset Host
Bridge (Hub A) (rev 01)
Subsystem: Dell Computer Corporation: Unknown device 0096
Flags: bus master, fast devsel, latency 0
Memory at f0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 2.0
00:01.0 PCI bridge: Intel Corporation 82840 840 (Carmel) Chipset AGP
Bridge (rev 01) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, fast devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: fc000000-fdffffff
Prefetchable memory behind bridge: e0000000-efffffff
00:1e.0 PCI bridge: Intel Corporation 82801AA PCI Bridge (rev 02)
(prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=03, sec-latency=64
I/O behind bridge: 0000d000-0000efff
Memory behind bridge: f8000000-fbffffff
Prefetchable memory behind bridge: f5000000-f6ffffff
00:1f.0 ISA bridge: Intel Corporation 82801AA ISA Bridge (LPC) (rev 02)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corporation 82801AA IDE (rev 02) (prog-if
80 [Master])
Subsystem: Intel Corporation 82801AA IDE
Flags: bus master, medium devsel, latency 0
I/O ports at ffa0 [size=16]
00:1f.2 USB Controller: Intel Corporation 82801AA USB (rev 02) (prog-if
00 [UHCI])
Subsystem: Intel Corporation 82801AA USB
Flags: bus master, medium devsel, latency 0, IRQ 14
I/O ports at ff80 [size=32]
00:1f.3 SMBus: Intel Corporation 82801AA SMBus (rev 02)
Subsystem: Intel Corporation 82801AA SMBus
Flags: medium devsel, IRQ 11
I/O ports at ccd0 [size=16]
01:00.0 VGA compatible controller: nVidia Corporation GeForce 256 (rev
10) (prog-if 00 [VGA])
Subsystem: Elsa AG: Unknown device 0c48
Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 9
Memory at fc000000 (32-bit, non-prefetchable) [size=16M]
Memory at e8000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at 80000000 [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Capabilities: [44] AGP version 2.0
02:04.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink]
(rev 78)
Subsystem: Dell Computer Corporation: Unknown device 0096
Flags: bus master, medium devsel, latency 64, IRQ 9
I/O ports at dc80 [size=128]
Memory at f8fffc00 (32-bit, non-prefetchable) [size=128]
Expansion ROM at f9000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
02:08.0 Multimedia audio controller: Creative Labs SB Live! EMU10000
(rev 07)
Subsystem: Creative Labs CT4780 SBLive! Value
Flags: bus master, medium devsel, latency 64, IRQ 9
I/O ports at dc60 [size=32]
Capabilities: [dc] Power Management version 1
02:08.1 Input device controller: Creative Labs SB Live! (rev 07)
Subsystem: Creative Labs Gameport Joystick
Flags: bus master, medium devsel, latency 64
I/O ports at dc58 [size=8]
Capabilities: [dc] Power Management version 1
02:0e.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03)
(prog-if 00 [Normal decode])
Flags: bus master, medium devsel, latency 64
Bus: primary=02, secondary=03, subordinate=03, sec-latency=64
I/O behind bridge: 0000e000-0000efff
Memory behind bridge: fa000000-fbffffff
Prefetchable memory behind bridge: 00000000f6000000-00000000f6f00000
Capabilities: [dc] Power Management version 1
03:0a.0 SCSI storage controller: Adaptec 7899P (rev 01)
Subsystem: Dell Computer Corporation: Unknown device 0096
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 10
BIST result: 00
I/O ports at ec00 [disabled] [size=256]
Memory at fafff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fb000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
03:0a.1 SCSI storage controller: Adaptec 7899P (rev 01)
Subsystem: Dell Computer Corporation: Unknown device 0096
Flags: bus master, 66Mhz, medium devsel, latency 64, IRQ 14
BIST result: 00
I/O ports at e800 [disabled] [size=256]
Memory at faffe000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at fb000000 [disabled] [size=128K]
Capabilities: [dc] Power Management version 2
--
Francis Fillion, BAA SI
Broadcasting live from his linux box.
And the maintainer of http://www.windplanet.com
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-users
