I have an Andrea AK5370 USB microphone. It works fine in W98. It is
recongnized in Linux, and appears in "gmix". But how do I set it as a
recording source? What knows how to record from this source?
-Bryce
bryce "at machine" obviously.com
> uname -a
Linux localhost.localdomain 2.4.2-2 #1 Sun Apr 8 20:41:30 EDT 2001 i686
unknown
> cat /proc/bus/usb/devices
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0556 ProdID=0001 Rev= 0.01
S: Manufacturer=AKM
S: Product=AK5370
> dmesg | fgrep -i usb
usb.c: USB device 4 (vend/prod 0x556/0x1) is not claimed by any active
driver.
usb.c: registered new driver audio
usbaudio: device 4 audiocontrol interface 0 has 1 input and 0 output
AudioStreaming interfaces
usbaudio: device 4 interface 1 altsetting 0 does not have an endpoint
usbaudio: device 4 interface 1 altsetting 1: format 0x00000010 sratelo
8000 sratehi 48000 attributes 0x01
usbaudio: constructing mixer for Terminal 2 type 0x0101
usbaudio: workaround for broken Philips Camera Microphone descriptor
enabled
usb_audio_parsecontrol: usb_audio_state at c6c01fa0
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-users
