Greetings all, I have found an annoying problem with a new USB keyboard. I have a dual celeron 466 SMP machine on an Epoch KP6-BS motherboard with UHCI USB support (I have tried both uhci and usb-uhci). The keyboard is a Happy Hacker Lite USB model which has an additional 2-port usb hub. The problem is if I boot with the keyboard plugged in the smpboot process can only boot one CPU and I get the keyboard: Timeout - AT keyboard not present? error. (see attached kernel messages). I have tried dozens of kernel configurations with keyboard support both build in to the kernel or loaded as a module. If I replace with a PS2 keyboard during boot up all goes well. Any ideas, it could be either USB or SMP related or both (or me) Cheers, Matt messages (first part only) Boot with USB plugged in: kernel: mtrr: base(0xe8000000) is not aligned on a size(0x1fe7000) boundary kernel: mtrr: base(0xe8000000) is not aligned on a size(0x1fe7000) boundary kernel: keyboard: Timeout - AT keyboard not present? kernel: keyboard: Timeout - AT keyboard not present? kernel: nfsd: terminating on signal 2 last message repeated 7 times kernel: Kernel logging (proc) stopped. kernel: Kernel log daemon terminating. exiting on signal 15 syslogd 1.3-3#33: restart. kernel: klogd 1.3-3#33, log source = /proc/kmsg started. kernel: Inspecting /boot/System.map-2.4.4 kernel: Loaded 20163 symbols from /boot/System.map-2.4.4. kernel: Symbols match kernel version 2.4.4. kernel: Loaded 8 symbols from 2 modules. kernel: nt: type 0, pol 3, trig 3, bus 0, IRQ 24, APIC ID 2, APIC INT 11 kernel: Int: type 0, pol 3, trig 3, bus 0, IRQ 28, APIC ID 2, APIC INT 12 kernel: Int: type 0, pol 3, trig 3, bus 0, IRQ 2c, APIC ID 2, APIC INT 13 kernel: Int: type 0, pol 3, trig 3, bus 0, IRQ 30, APIC ID 2, APIC INT 13 kernel: Int: type 0, pol 3, trig 3, bus 1, IRQ 00, APIC ID 2, APIC INT 10 kernel: Int: type 2, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 17 kernel: Lint: type 3, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 00 kernel: Lint: type 1, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 01 kernel: Processors: 2 kernel: mapped APIC to ffffe000 (fee00000) kernel: mapped IOAPIC to ffffd000 (fec00000) kernel: Kernel command line: BOOT_IMAGE=244FW ro root=341 video=matrox:vesa:443 kernel: Initializing CPU#0 kernel: Detected 467.734 MHz processor. kernel: Console: colour VGA+ 80x50 kernel: Calibrating delay loop... 933.88 BogoMIPS kernel: Memory: 253412k/262080k available (2045k kernel code, 8280k reserved, 751k data, 248k init, 0k highmem) kernel: Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) kernel: Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) kernel: Page-cache hash table entries: 65536 (order: 6, 262144 bytes) kernel: Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) kernel: CPU: L1 I cache: 16K, L1 D cache: 16K kernel: CPU: L2 cache: 128K kernel: Intel machine check architecture supported. kernel: Intel machine check reporting enabled on CPU#0. kernel: Enabling fast FPU save and restore... done. kernel: Checking 'hlt' instruction... OK. kernel: POSIX conformance testing by UNIFIX kernel: mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) kernel: mtrr: detected mtrr type: Intel kernel: CPU: L1 I cache: 16K, L1 D cache: 16K kernel: CPU: L2 cache: 128K kernel: Intel machine check reporting enabled on CPU#0. kernel: CPU0: Intel Celeron (Mendocino) stepping 05 kernel: per-CPU timeslice cutoff: 365.67 usecs. kernel: Getting VERSION: 40011 kernel: Getting VERSION: 40011 kernel: Getting ID: 0 kernel: Getting ID: f000000 kernel: Getting LVT0: 700 kernel: Getting LVT1: 400 kernel: enabled ExtINT on CPU#0 kernel: ESR value before enabling vector: 00000000 kernel: ESR value after enabling vector: 00000000 kernel: CPU present map: 3 kernel: Booting processor 1/1 eip 2000 kernel: Setting warm reset code and vector. kernel: 1. kernel: 2. kernel: 3. kernel: Asserting INIT. kernel: Waiting for send to finish... kernel: +Deasserting INIT. kernel: Waiting for send to finish... kernel: +#startup loops: 2. kernel: Sending STARTUP #1. kernel: After apic_write. kernel: Startup point 1. kernel: Waiting for send to finish... kernel: +Sending STARTUP #2. kernel: After apic_write. kernel: Startup point 1. kernel: Waiting for send to finish... kernel: +After Startup. kernel: Before Callout 1. kernel: After Callout 1. kernel: Not responding. kernel: Inquiring remote APIC #1... kernel: ... APIC #1 ID: 01000000 kernel: ... APIC #1 VERSION: 00040011 kernel: ... APIC #1 SPIV: 000000ff kernel: phys CPU #1 not responding - cannot use it. kernel: Before bogomips. kernel: Boot done. kernel: ENABLING IO-APIC IRQs kernel: ...changing IO-APIC physical APIC ID to 2 ... ok. kernel: Synchronizing Arb IDs. kernel: ..TIMER: vector=49 pin1=2 pin2=0 kernel: testing the IO APIC....................... kernel: kernel: .................................... done. kernel: calibrating APIC timer ... kernel: ..... CPU clock speed is 467.7716 MHz. kernel: ..... host bus clock speed is 66.8243 MHz. kernel: cpu: 0, clocks: 668243, slice: 334121 kernel: CPU0<T0:668240,T1:334112,D:7,S:334121,C:668243> kernel: Setting commenced=1, go go go kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb2b0, last bus=1 kernel: PCI: Using configuration type 1 kernel: PCI: Probing PCI hardware ===================================================== with PS2 keyboard (and later USB keybd plugin.) ===================================================== kernel: Kernel log daemon terminating. kernel: klogd 1.3-3#33, log source = /proc/kmsg started. kernel: Inspecting /boot/System.map-2.4.4 kernel: Loaded 18659 symbols from /boot/System.map-2.4.4. kernel: Symbols match kernel version 2.4.4. kernel: Loaded 183 symbols from 8 modules. kernel: 0: 000000000fff0000 - 000000000fff3000 (ACPI NVS) kernel: BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data) kernel: BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) kernel: BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) kernel: BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) kernel: Scan SMP from c0000000 for 1024 bytes. kernel: Scan SMP from c009fc00 for 1024 bytes. kernel: Scan SMP from c00f0000 for 65536 bytes. kernel: found SMP MP-table at 000f5640 kernel: hm, page 000f5000 reserved twice. kernel: hm, page 000f6000 reserved twice. kernel: hm, page 000f1000 reserved twice. kernel: hm, page 000f2000 reserved twice. kernel: On node 0 totalpages: 65520 kernel: zone(0): 4096 pages. kernel: zone(1): 61424 pages. kernel: zone(2): 0 pages. kernel: Intel MultiProcessor Specification v1.1 kernel: Virtual Wire compatibility mode. kernel: OEM ID: OEM00000 Product ID: PROD00000000 APIC at: 0xFEE00000 kernel: Processor #0 Pentium(tm) Pro APIC version 17 kernel: Floating point unit present. kernel: Machine Exception supported. kernel: 64 bit compare & exchange supported. kernel: Internal APIC present. kernel: SEP present. kernel: MTRR present. kernel: PGE present. kernel: MCA present. kernel: CMOV present. kernel: Bootup CPU kernel: Processor #1 Pentium(tm) Pro APIC version 17 kernel: Floating point unit present. kernel: Machine Exception supported. kernel: 64 bit compare & exchange supported. kernel: Internal APIC present. kernel: SEP present. kernel: MTRR present. kernel: PGE present. kernel: MCA present. kernel: CMOV present. kernel: Bus #0 is PCI kernel: Bus #1 is PCI kernel: Bus #2 is ISA kernel: I/O APIC #2 Version 17 at 0xFEC00000. kernel: Int: type 3, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 00 kernel: Int: type 0, pol 0, trig 0, bus 2, IRQ 01, APIC ID 2, APIC INT 01 kernel: Int: type 0, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 02 kernel: Int: type 0, pol 0, trig 0, bus 2, IRQ 03, APIC ID 2, APIC INT 03 kernel: Int: type 0, pol 0, trig 0, bus 2, IRQ 04, APIC ID 2, APIC INT 04 kernel: Int: type 0, pol 0, trig 0, bus 2, IRQ 05, APIC ID 2, APIC INT 05 kernel: Int: type 0, pol 0, trig 0, bus 2, IRQ 06, APIC ID 2, APIC INT 06 kernel: Int: type 0, pol 0, trig 0, bus 2, IRQ 07, APIC ID 2, APIC INT 07 kernel: Int: type 0, pol 1, trig 1, bus 2, IRQ 08, APIC ID 2, APIC INT 08 kernel: Int: type 0, pol 0, trig 0, bus 2, IRQ 09, APIC ID 2, APIC INT 09 kernel: Int: type 0, pol 0, trig 0, bus 2, IRQ 0a, APIC ID 2, APIC INT 0a kernel: Int: type 0, pol 0, trig 0, bus 2, IRQ 0b, APIC ID 2, APIC INT 0b kernel: Int: type 0, pol 0, trig 0, bus 2, IRQ 0c, APIC ID 2, APIC INT 0c kernel: Int: type 0, pol 0, trig 0, bus 2, IRQ 0d, APIC ID 2, APIC INT 0d kernel: Int: type 0, pol 0, trig 0, bus 2, IRQ 0e, APIC ID 2, APIC INT 0e kernel: Int: type 0, pol 0, trig 0, bus 2, IRQ 0f, APIC ID 2, APIC INT 0f kernel: Int: type 0, pol 3, trig 3, bus 0, IRQ 1c, APIC ID 2, APIC INT 13 kernel: Int: type 0, pol 3, trig 3, bus 0, IRQ 24, APIC ID 2, APIC INT 11 kernel: Int: type 0, pol 3, trig 3, bus 0, IRQ 28, APIC ID 2, APIC INT 12 kernel: Int: type 0, pol 3, trig 3, bus 0, IRQ 2c, APIC ID 2, APIC INT 13 kernel: Int: type 0, pol 3, trig 3, bus 0, IRQ 30, APIC ID 2, APIC INT 13 kernel: Int: type 0, pol 3, trig 3, bus 1, IRQ 00, APIC ID 2, APIC INT 10 kernel: Int: type 2, pol 0, trig 0, bus 2, IRQ 00, APIC ID 2, APIC INT 17 kernel: Lint: type 3, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 00 kernel: Lint: type 1, pol 0, trig 0, bus 0, IRQ 00, APIC ID ff, APIC LINT 01 kernel: Processors: 2 kernel: mapped APIC to ffffe000 (fee00000) kernel: mapped IOAPIC to ffffd000 (fec00000) kernel: Kernel command line: auto BOOT_IMAGE=new ro root=341 apic=no-idle video=matrox:vesa:443 kernel: Initializing CPU#0 kernel: Detected 525.006 MHz processor. kernel: Console: colour VGA+ 80x50 kernel: Calibrating delay loop... 1048.57 BogoMIPS kernel: Memory: 254288k/262080k available (1772k kernel code, 7404k reserved, 667k data, 220k init, 0k highmem) kernel: Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes) kernel: Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes) kernel: Page-cache hash table entries: 65536 (order: 6, 262144 bytes) kernel: Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) kernel: CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0 kernel: CPU: L1 I cache: 16K, L1 D cache: 16K kernel: CPU: L2 cache: 128K kernel: Intel machine check architecture supported. kernel: Intel machine check reporting enabled on CPU#0. kernel: CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000 kernel: CPU: After generic, caps: 0183fbff 00000000 00000000 00000000 kernel: CPU: Common caps: 0183fbff 00000000 00000000 00000000 kernel: Enabling fast FPU save and restore... done. kernel: Checking 'hlt' instruction... OK. kernel: POSIX conformance testing by UNIFIX kernel: mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED]) kernel: mtrr: detected mtrr type: Intel kernel: CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0 kernel: CPU: L1 I cache: 16K, L1 D cache: 16K kernel: CPU: L2 cache: 128K kernel: Intel machine check reporting enabled on CPU#0. kernel: CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000 kernel: CPU: After generic, caps: 0183fbff 00000000 00000000 00000000 kernel: CPU: Common caps: 0183fbff 00000000 00000000 00000000 kernel: CPU0: Intel Celeron (Mendocino) stepping 05 kernel: per-CPU timeslice cutoff: 365.21 usecs. kernel: Getting VERSION: 40011 kernel: Getting VERSION: 40011 kernel: Getting ID: 0 kernel: Getting ID: f000000 kernel: Getting LVT0: 700 kernel: Getting LVT1: 400 kernel: enabled ExtINT on CPU#0 kernel: ESR value before enabling vector: 00000000 kernel: ESR value after enabling vector: 00000000 kernel: CPU present map: 3 kernel: Booting processor 1/1 eip 2000 kernel: Setting warm reset code and vector. kernel: 1. kernel: 2. kernel: 3. kernel: Asserting INIT. kernel: Waiting for send to finish... kernel: +Deasserting INIT. kernel: Waiting for send to finish... kernel: +#startup loops: 2. kernel: Sending STARTUP #1. kernel: After apic_write. kernel: Initializing CPU#1 kernel: CPU#1 (phys ID: 1) waiting for CALLOUT kernel: Startup point 1. kernel: Waiting for send to finish... kernel: +Sending STARTUP #2. kernel: After apic_write. kernel: Startup point 1. kernel: Waiting for send to finish... kernel: +After Startup. kernel: Before Callout 1. kernel: After Callout 1. kernel: CALLIN, before setup_local_APIC(). kernel: masked ExtINT on CPU#1 kernel: ESR value before enabling vector: 00000000 kernel: ESR value after enabling vector: 00000000 kernel: Calibrating delay loop... 1048.57 BogoMIPS kernel: Stack at about c145ffbc kernel: CPU: Before vendor init, caps: 0183fbff 00000000 00000000, vendor = 0 kernel: CPU: L1 I cache: 16K, L1 D cache: 16K kernel: CPU: L2 cache: 128K kernel: Intel machine check reporting enabled on CPU#1. kernel: CPU: After vendor init, caps: 0183fbff 00000000 00000000 00000000 kernel: CPU: After generic, caps: 0183fbff 00000000 00000000 00000000 kernel: CPU: Common caps: 0183fbff 00000000 00000000 00000000 kernel: OK. kernel: CPU1: Intel Celeron (Mendocino) stepping 05 kernel: CPU has booted. kernel: Before bogomips. kernel: Total of 2 processors activated (2097.15 BogoMIPS). kernel: Before bogocount - setting activated=1. kernel: Boot done. kernel: ENABLING IO-APIC IRQs kernel: ...changing IO-APIC physical APIC ID to 2 ... ok. kernel: Synchronizing Arb IDs. kernel: init IO_APIC IRQs kernel: IO-APIC (apicid-pin) 2-0, 2-20, 2-21, 2-22, 2-23 not connected. kernel: ..TIMER: vector=49 pin1=2 pin2=0 kernel: number of MP IRQ sources: 23. kernel: number of IO-APIC #2 registers: 24. kernel: testing the IO APIC....................... kernel: kernel: IO APIC #2...... kernel: .... register #00: 02000000 kernel: ....... : physical APIC id: 02 kernel: .... register #01: 00170011 kernel: ....... : max redirection entries: 0017 kernel: ....... : IO APIC version: 0011 kernel: .... register #02: 00000000 kernel: ....... : arbitration: 00 kernel: .... IRQ redirection table: kernel: NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect: kernel: 00 000 00 1 0 0 0 0 0 0 00 kernel: 01 003 03 0 0 0 0 0 1 1 39 kernel: 02 003 03 0 0 0 0 0 1 1 31 kernel: 03 003 03 0 0 0 0 0 1 1 41 kernel: 04 003 03 0 0 0 0 0 1 1 49 kernel: 05 003 03 0 0 0 0 0 1 1 51 kernel: 06 003 03 0 0 0 0 0 1 1 59 kernel: 07 003 03 0 0 0 0 0 1 1 61 kernel: 08 003 03 0 0 0 0 0 1 1 69 kernel: 09 003 03 0 0 0 0 0 1 1 71 kernel: 0a 003 03 0 0 0 0 0 1 1 79 kernel: 0b 003 03 0 0 0 0 0 1 1 81 kernel: 0c 003 03 0 0 0 0 0 1 1 89 kernel: 0d 003 03 0 0 0 0 0 1 1 91 kernel: 0e 003 03 0 0 0 0 0 1 1 99 kernel: 0f 003 03 0 0 0 0 0 1 1 A1 kernel: 10 003 03 1 1 0 1 0 1 1 A9 kernel: 11 003 03 1 1 0 1 0 1 1 B1 kernel: 12 003 03 1 1 0 1 0 1 1 B9 kernel: 13 003 03 1 1 0 1 0 1 1 C1 kernel: 14 000 00 1 0 0 0 0 0 0 00 kernel: 15 000 00 1 0 0 0 0 0 0 00 kernel: 16 000 00 1 0 0 0 0 0 0 00 kernel: 17 000 00 1 0 0 0 0 0 0 00 kernel: IRQ to pin mappings: kernel: IRQ0 -> 2 kernel: IRQ1 -> 1 kernel: IRQ3 -> 3 kernel: IRQ4 -> 4 kernel: IRQ5 -> 5 kernel: IRQ6 -> 6 kernel: IRQ7 -> 7 kernel: IRQ8 -> 8 kernel: IRQ9 -> 9 kernel: IRQ10 -> 10 kernel: IRQ11 -> 11 kernel: IRQ12 -> 12 kernel: IRQ13 -> 13 kernel: IRQ14 -> 14 kernel: IRQ15 -> 15 kernel: IRQ16 -> 16 kernel: IRQ17 -> 17 kernel: IRQ18 -> 18 kernel: IRQ19 -> 19 kernel: .................................... done. kernel: calibrating APIC timer ... kernel: ..... CPU clock speed is 525.0228 MHz. kernel: ..... host bus clock speed is 75.0028 MHz. kernel: cpu: 0, clocks: 750028, slice: 250009 kernel: CPU0<T0:750016,T1:500000,D:7,S:250009,C:750028> kernel: cpu: 1, clocks: 750028, slice: 250009 kernel: CPU1<T0:750016,T1:249984,D:14,S:250009,C:750028> kernel: checking TSC synchronization across CPUs: passed. kernel: Setting commenced=1, go go go kernel: mtrr: your CPUs had inconsistent fixed MTRR settings kernel: mtrr: probably your BIOS does not setup all CPUs kernel: PCI: PCI BIOS revision 2.10 entry at 0xfb2b0, last bus=1 kernel: PCI: Using configuration type 1 kernel: PCI: Probing PCI hardware kernel: PCI: Using IRQ router PIIX [8086/7110] at 00:07.0 kernel: PCI->APIC IRQ transform: (B0,I7,P3) -> 19 kernel: PCI->APIC IRQ transform: (B0,I9,P0) -> 17 kernel: PCI->APIC IRQ transform: (B0,I10,P0) -> 18 kernel: PCI->APIC IRQ transform: (B0,I11,P0) -> 19 kernel: PCI->APIC IRQ transform: (B0,I12,P0) -> 19 kernel: PCI->APIC IRQ transform: (B1,I0,P0) -> 16 kernel: Limiting direct PCI/PCI transfers. kernel: Linux NET4.0 for Linux 2.4 kernel: Based upon Swansea University Computer Society NET3.039 kernel: Initializing RT netlink socket kernel: Starting kswapd v1.8 kernel: Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ... kernel: Winbond chip at EFER=0x3f0 key=0x87 devid=97 devrev=73 oldid=ff kernel: Winbond chip type 83977TF / SMSC 97w33x/97w34x kernel: Winbond LPT Config: cr_30=01 60,61=0378 70=07 74=03, f0=07 kernel: Winbond LPT Config: active=yes, io=0x0378 irq=7, dma=3 kernel: Winbond LPT Config: irqtype=pulsed low, high-Z, ECP fifo threshold=0 kernel: Winbond LPT Config: Port mode=ECP and EPP-1.7 kernel: SMSC Super-IO detection, now testing Ports 2F0, 370 ... kernel: 0x378: FIFO is 16 bytes kernel: 0x378: writeIntrThreshold is 16 kernel: 0x378: readIntrThreshold is 16 kernel: 0x378: PWord is 8 bits kernel: 0x378: Interrupts are ISA-Pulses kernel: 0x378: ECP port cfgA=0x10 cfgB=0x48 kernel: 0x378: ECP settings irq=7 dma=<none or set by other means> kernel: parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,COMPAT,EPP,ECP] kernel: parport0: irq 7 detected kernel: parport0: cpp_daisy: aa5500ff(38) kernel: parport0: assign_addrs: aa5500ff(38) kernel: parport0: cpp_daisy: aa5500ff(38) kernel: parport0: assign_addrs: aa5500ff(38) kernel: matroxfb: Matrox unknown G400 (AGP) detected kernel: matroxfb: MTRR's turned on kernel: matroxfb: 1280x1024x24bpp (virtual: 1280x4368) kernel: matroxfb: framebuffer at 0xE8000000, mapped to 0xd0805000, size 33554432 kernel: Console: switching to colour frame buffer device 160x64 kernel: fb0: MATROX VGA frame buffer device kernel: pty: 256 Unix98 ptys configured kernel: block: queued sectors max/low 168826kB/56275kB, 512 slots per queue kernel: RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize kernel: Uniform Multi-Platform E-IDE driver Revision: 6.31 kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx kernel: PIIX4: IDE controller on PCI bus 00 dev 39 kernel: PIIX4: chipset revision 1 kernel: PIIX4: not 100% native mode: will probe irqs later kernel: ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA kernel: ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA kernel: hda: ST34311A, ATA DISK drive kernel: hdb: QUANTUM FIREBALLlct10 20, ATA DISK drive kernel: hdc: ATAPI CD-ROM DRIVE 40X MAXIMUM, ATAPI CD/DVD-ROM drive kernel: hdd: IOMEGA ZIP 100 ATAPI, ATAPI FLOPPY drive kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 kernel: ide1 at 0x170-0x177,0x376 on irq 15 kernel: hda: 8452080 sectors (4327 MB) w/256KiB Cache, CHS=526/255/63, UDMA(33) kernel: hdb: 39876480 sectors (20417 MB) w/418KiB Cache, CHS=2482/255/63, UDMA(33) kernel: hdc: ATAPI 40X CD-ROM drive, 128kB Cache, UDMA(33) kernel: Uniform CD-ROM driver Revision: 3.12 kernel: hdd: 98304kB, 96/64/32 CHS, 4096 kBps, 512 sector size, 2941 rpm kernel: Partition check: kernel: hda: hda1 hda2 < hda5 hda6 > kernel: hdb: hdb1 hdb2 hdb3 hdb4 < hdb5 hdb6 hdb7 hdb8 hdb9 > kernel: Floppy drive(s): fd0 is 1.44M kernel: FDC 0 is a post-1991 82077 kernel: cops.c:v0.04 6/7/98 Jay Schulist <[EMAIL PROTECTED]> kernel: lt0: cops at 0x340, IRQ 5, in Tangent mode kernel: EFS: 1.0a - http://aeschi.ch.eu.org/efs/ kernel: Serial driver version 5.05a (2001-03-20) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A kernel: Linux Tulip driver version 0.9.14e (April 20, 2001) kernel: 00:0a.0: MII transceiver #1 config 3000 status 7829 advertising 01e1. kernel: eth0: Lite-On 82c168 PNIC rev 32 at 0xe800, 00:A0:CC:5B:51:79, IRQ 18. kernel: Linux agpgart interface v0.99 (c) Jeff Hartmann kernel: agpgart: Maximum main memory to use for agp memory: 203M kernel: agpgart: Detected Intel 440BX chipset kernel: agpgart: AGP aperture is 64M @ 0xe0000000 kernel: [drm] AGP 0.99 on Intel 440BX @ 0xe0000000 64MB kernel: [drm] Initialized mga 2.0.1 20000928 on minor 63 kernel: SCSI subsystem driver Revision: 1.00 kernel: scsi0 : SCSI host adapter emulation for IDE ATAPI devices kernel: scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.1.5 kernel: <Adaptec 2902/04/10/15/20/30C SCSI adapter> kernel: aic7850: Single Channel A, SCSI Id=7, 3/255 SCBs kernel: kernel: Vendor: YAMAHA Model: CRW8424S Rev: 1.0d kernel: Type: CD-ROM ANSI SCSI revision: 02 kernel: Detected scsi CD-ROM sr0 at scsi1, channel 0, id 3, lun 0 kernel: (scsi1:A:3): 10.000MB/s transfers (10.000MHz, offset 15) kernel: sr0: scsi3-mmc drive: 24x/16x writer cd/rw xa/form2 cdda tray kernel: es1371: version v0.30 time 18:33:51 May 24 2001 kernel: es1371: found chip, vendor id 0x1274 device id 0x1371 revision 0x08 kernel: es1371: found es1371 rev 8 at io 0xe400 irq 17 kernel: es1371: features: joystick 0x0 kernel: ac97_codec: AC97 Audio codec, id: 0x4352:0x5913 (Cirrus Logic CS4297A rev A) kernel: NET4: Linux TCP/IP 1.0 for NET4.0 kernel: IP Protocols: ICMP, UDP, TCP kernel: IP: routing cache hash table of 2048 buckets, 16Kbytes kernel: ACPI-0416: *** Warning: Reference \_PR_.CPU0 at AML 7D0 not found kernel: TCP: Hash tables configured (established 16384 bind 16384) kernel: NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. kernel: NET4: AppleTalk 0.18a for Linux NET4.0 kernel: ACPI: Core Subsystem version [20010208] kernel: ACPI: Subsystem enabled kernel: ACPI: Using ACPI idle kernel: ACPI: If experiencing system slowness, try adding "acpi=no-idle" to cmdline kernel: ACPI: System firmware supports: S0 S1 S4 S5 kernel: ide_dmaproc: chipset supported ide_dma_lostirq func only: 13 kernel: hdb: lost interrupt kernel: VFS: Mounted root (ext2 filesystem) readonly. kernel: Freeing unused kernel memory: 220k freed kernel: Adding Swap: 208804k swap-space (priority -1) kernel: Adding Swap: 281096k swap-space (priority -2) kernel: i2c-core.o: i2c core module kernel: i2c-algo-bit.o: i2c bit algorithm module kernel: i2c-dev.o: i2c /dev entries driver module kernel: i2c-core.o: driver i2c-dev dummy driver registered. kernel: i2c-algo-pcf.o: i2c pcf8584 algorithm module kernel: ipddp.c:v0.01 8/28/97 Bradford W. Johnson <[EMAIL PROTECTED]> kernel: ipddp0: Appletalk-IP Encap. mode by Bradford W. Johnson <[EMAIL PROTECTED]> kernel: reiserfs: checking transaction log (device 03:47) ... kernel: Using r5 hash to sort names kernel: ReiserFS version 3.6.25 kernel: reiserfs: checking transaction log (device 03:45) ... kernel: Using r5 hash to sort names kernel: ReiserFS version 3.6.25 kernel: reiserfs: checking transaction log (device 03:48) ... kernel: Using r5 hash to sort names kernel: ReiserFS version 3.6.25 kernel: reiserfs: checking transaction log (device 03:43) ... kernel: Using r5 hash to sort names kernel: ReiserFS version 3.6.25 kernel: usb.c: registered new driver usbdevfs kernel: usb.c: registered new driver hub kernel: Linux PCMCIA Card Services 3.1.22 kernel: options: [pci] [cardbus] [pm] kernel: Intel PCIC probe: not found. kernel: ds: no socket drivers loaded! kernel: eth0: Setting full-duplex based on MII#1 link partner capability of 45e1. kernel: mtrr: base(0xe8000000) is not aligned on a size(0x1fe7000) boundary kernel: mtrr: base(0xe8000000) is not aligned on a size(0x1fe7000) boundary kernel: Unable to register DDP with SNAP. kernel: Unable to register AARP with SNAP. kernel: NET4: AppleTalk 0.18a for Linux NET4.0 kernel: usb-uhci.c: $Revision: 1.259 $ time 13:46:50 May 25 2001 kernel: usb-uhci.c: High bandwidth mode enabled kernel: usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 19 kernel: usb-uhci.c: Detected 2 ports kernel: usb.c: new USB bus registered, assigned bus number 1 kernel: usb.c: kmalloc IF cb690840, numif 1 kernel: usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1 kernel: usb.c: USB device number 1 default language ID 0x0 kernel: Product: USB UHCI Root Hub kernel: SerialNumber: e000 kernel: hub.c: USB hub found kernel: hub.c: 2 ports detected kernel: hub.c: standalone hub kernel: hub.c: ganged power switching kernel: hub.c: global over-current protection kernel: hub.c: power on to power good time: 2ms kernel: hub.c: hub controller current requirement: 0mA kernel: hub.c: port removable status: RR kernel: hub.c: local power source is good kernel: hub.c: no over-current condition exists kernel: hub.c: enabling power on all ports kernel: usb.c: hub driver claimed interface cb690840 kernel: usb.c: kusbd: /sbin/hotplug add 1 kernel: usb.c: kusbd policy returned 0xfffffffe kernel: hub.c: port 1 connection change kernel: hub.c: port 1, portstatus 101, change 1, 12 Mb/s kernel: hub.c: port 1, portstatus 103, change 0, 12 Mb/s kernel: hub.c: USB new device connect on bus1/1, assigned device number 2 kernel: usb.c: kmalloc IF cb690ae0, numif 1 kernel: usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0 kernel: usb.c: USB device number 2 default language ID 0x409 kernel: Manufacturer: Chicony kernel: Product: Generic USB Hub kernel: hub.c: USB hub found kernel: hub.c: 1 port detected kernel: hub.c: part of a compound device kernel: hub.c: individual port power switching kernel: hub.c: individual port over-current protection kernel: hub.c: power on to power good time: 100ms kernel: hub.c: hub controller current requirement: 90mA kernel: hub.c: port removable status: F kernel: hub.c: local power source is good kernel: hub.c: no over-current condition exists kernel: hub.c: enabling power on all ports kernel: usb.c: hub driver claimed interface cb690ae0 kernel: usb.c: kusbd: /sbin/hotplug add 2 kernel: usb.c: kusbd policy returned 0xfffffffe kernel: hub.c: port 1 connection change kernel: hub.c: port 1, portstatus 101, change 1, 12 Mb/s kernel: hub.c: port 1, portstatus 103, change 10, 12 Mb/s kernel: hub.c: USB new device connect on bus1/1/1, assigned device number 3 kernel: usb.c: kmalloc IF cb6907c0, numif 1 kernel: usb.c: skipped 1 class/vendor specific interface descriptors kernel: usb.c: new device strings: Mfr=3, Product=4, SerialNumber=0 kernel: usb.c: USB device number 3 default language ID 0x409 kernel: Manufacturer: Chicony kernel: Product: PFU-65 USB Keyboard kernel: usb.c: unhandled interfaces on device kernel: usb.c: USB device 3 (vend/prod 0x472/0x65) is not claimed by any active driver. kernel: Length = 18 kernel: DescriptorType = 01 kernel: USB version = 1.10 kernel: Vendor:Product = 0472:0065 kernel: MaxPacketSize0 = 8 kernel: NumConfigurations = 1 kernel: Device version = 1.00 kernel: Device Class:SubClass:Protocol = 00:00:00 kernel: Per-interface classes kernel: Configuration: kernel: bLength = 9 kernel: bDescriptorType = 02 kernel: wTotalLength = 0022 kernel: bNumInterfaces = 01 kernel: bConfigurationValue = 01 kernel: iConfiguration = 04 kernel: bmAttributes = e0 kernel: MaxPower = 0mA kernel: kernel: Interface: 0 kernel: Alternate Setting: 0 kernel: bLength = 9 kernel: bDescriptorType = 04 kernel: bInterfaceNumber = 00 kernel: bAlternateSetting = 00 kernel: bNumEndpoints = 01 kernel: bInterface Class:SubClass:Protocol = 03:01:01 kernel: iInterface = 00 kernel: Endpoint: kernel: bLength = 7 kernel: bDescriptorType = 05 kernel: bEndpointAddress = 81 (in) kernel: bmAttributes = 03 (Interrupt) kernel: wMaxPacketSize = 0008 kernel: bInterval = 18 kernel: usb.c: kusbd: /sbin/hotplug add 3 kernel: usb.c: kusbd policy returned 0xfffffffe kernel: i2c-dev.o: Registered 'DDC:fb0 #0 on i2c-matroxfb' as minor 0 kernel: i2c-core.o: adapter DDC:fb0 #0 on i2c-matroxfb registered as adapter 0. kernel: i2c-dev.o: Registered 'DDC:fb0 #1 on i2c-matroxfb' as minor 1 kernel: i2c-core.o: adapter DDC:fb0 #1 on i2c-matroxfb registered as adapter 1. kernel: i2c-dev.o: Registered 'MAVEN:fb0 on i2c-matroxfb' as minor 2 kernel: i2c-core.o: adapter MAVEN:fb0 on i2c-matroxfb registered as adapter 2. kernel: usb.c: USB disconnect on device 1 kernel: usb.c: USB disconnect on device 2 kernel: usb.c: USB disconnect on device 3 kernel: usb.c: kusbd: /sbin/hotplug remove 3 kernel: usb.c: kusbd policy returned 0xfffffffe kernel: usb.c: kusbd: /sbin/hotplug remove 2 kernel: usb.c: kusbd policy returned 0xfffffffe kernel: usb.c: kusbd: /sbin/hotplug remove 1 kernel: usb.c: kusbd policy returned 0xfffffffe kernel: usb.c: USB bus 1 deregistered kernel: uhci.c: USB UHCI at I/O 0xe000, IRQ 19 kernel: uhci.c: detected 2 ports kernel: usb.c: new USB bus registered, assigned bus number 1 kernel: usb.c: kmalloc IF cb690720, numif 1 kernel: usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1 kernel: usb.c: USB device number 1 default language ID 0x0 kernel: Product: USB UHCI-alt Root Hub kernel: SerialNumber: e000 kernel: hub.c: USB hub found kernel: hub.c: 2 ports detected kernel: hub.c: standalone hub kernel: hub.c: ganged power switching kernel: hub.c: global over-current protection kernel: hub.c: power on to power good time: 2ms kernel: hub.c: hub controller current requirement: 0mA kernel: hub.c: port removable status: RR kernel: hub.c: local power source is good kernel: hub.c: no over-current condition exists kernel: hub.c: enabling power on all ports kernel: usb.c: hub driver claimed interface cb690720 kernel: usb.c: kusbd: /sbin/hotplug add 1 kernel: usb.c: kusbd policy returned 0xfffffffe kernel: uhci.c: root-hub INT complete: port1: 93 port2: 80 data: 2 kernel: hub.c: port 1 connection change kernel: hub.c: port 1, portstatus 101, change 1, 12 Mb/s kernel: hub.c: port 1, portstatus 103, change 0, 12 Mb/s kernel: hub.c: USB new device connect on bus1/1, assigned device number 2 kernel: usb.c: kmalloc IF cb690660, numif 1 kernel: usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0 kernel: usb.c: USB device number 2 default language ID 0x409 kernel: Manufacturer: Chicony kernel: Product: Generic USB Hub kernel: hub.c: USB hub found kernel: hub.c: 1 port detected kernel: hub.c: part of a compound device kernel: hub.c: individual port power switching kernel: hub.c: individual port over-current protection kernel: hub.c: power on to power good time: 100ms kernel: hub.c: hub controller current requirement: 90mA kernel: hub.c: port removable status: F kernel: hub.c: local power source is good kernel: hub.c: no over-current condition exists kernel: hub.c: enabling power on all ports kernel: usb.c: hub driver claimed interface cb690660 kernel: usb.c: kusbd: /sbin/hotplug add 2 kernel: usb.c: kusbd policy returned 0xfffffffe kernel: hub.c: port 1 connection change kernel: hub.c: port 1, portstatus 101, change 1, 12 Mb/s kernel: hub.c: port 1, portstatus 103, change 10, 12 Mb/s kernel: hub.c: USB new device connect on bus1/1/1, assigned device number 3 kernel: usb.c: kmalloc IF cb6905e0, numif 1 kernel: usb.c: skipped 1 class/vendor specific interface descriptors kernel: usb.c: new device strings: Mfr=3, Product=4, SerialNumber=0 kernel: usb.c: USB device number 3 default language ID 0x409 kernel: Manufacturer: Chicony kernel: Product: PFU-65 USB Keyboard kernel: usb.c: unhandled interfaces on device kernel: usb.c: USB device 3 (vend/prod 0x472/0x65) is not claimed by any active driver. kernel: Length = 18 kernel: DescriptorType = 01 kernel: USB version = 1.10 kernel: Vendor:Product = 0472:0065 kernel: MaxPacketSize0 = 8 kernel: NumConfigurations = 1 kernel: Device version = 1.00 kernel: Device Class:SubClass:Protocol = 00:00:00 kernel: Per-interface classes kernel: Configuration: kernel: bLength = 9 kernel: bDescriptorType = 02 kernel: wTotalLength = 0022 kernel: bNumInterfaces = 01 kernel: bConfigurationValue = 01 kernel: iConfiguration = 04 kernel: bmAttributes = e0 kernel: MaxPower = 0mA kernel: kernel: Interface: 0 kernel: Alternate Setting: 0 kernel: bLength = 9 kernel: bDescriptorType = 04 kernel: bInterfaceNumber = 00 kernel: bAlternateSetting = 00 kernel: bNumEndpoints = 01 kernel: bInterface Class:SubClass:Protocol = 03:01:01 kernel: iInterface = 00 kernel: Endpoint: kernel: bLength = 7 kernel: bDescriptorType = 05 kernel: bEndpointAddress = 81 (in) kernel: bmAttributes = 03 (Interrupt) kernel: wMaxPacketSize = 0008 kernel: bInterval = 18 kernel: usb.c: kusbd: /sbin/hotplug add 3 kernel: usb.c: kusbd policy returned 0xfffffffe -- Matt Aylward <[EMAIL PROTECTED]> Department of Botany, The University of Western Australia. =====_______Linux: OS for the people by the people_______====== =====_______ OS with the power for Real Science _______====== _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: http://lists.sourceforge.net/lists/listinfo/linux-usb-users
