|
Thanks for answering.
>Does this modem not work with the extant 2.4.4 drivers? Do you mean some generic driver? *Please tell me where I can find these.* I'm willing to try anything. > > When I do > > insmod -f /lib/modules/draytek/m128 vendor=0x07fa ProdID= 0x0778 >Please find a more appropriate venue - > probably the vendor. I have asked the vendor to supply the source - he won't -, and to compile a version for my kernel, and he says he'll take the request under consideration. The modem is a Draytek miniVigor 128, sold in France as Djinn Numéris USB. The French name is what shows up in proc/bus/usb/devices (but with driver=(none) next to it), and that's where I got the vendor and product IDs. The maker, Draytek, has drivers specifically compiled for kernel 2.2.16 and 2.4.0, and when I insmod the module, I get the following message: Warning: kernel-module version mismatch /lib/modules/draytek/m128 was compiled for kernel version 2.4.0 while this kernel is version 2.4.3-20mdksmp > 2. Why are you trying to force the vendor and product IDs? Since the modem's internal info has a specific vendor name. The local distributor, by the way, says that this modem won't run under Linux, but I know for a fact that it's been done. I just can't get anybody here to tell me how. The French reseller doesn't develop any drivers, they rely on Draytek. >Why are you using > insmod at all? That's how the module normally loads. When the module is installed from the rpm, it creates a call to insmod -f /lib/modules/draytek/m128 during initialization. > Unless you have a specific developmental reason, you should > just be able to modprobe the support you need. I'm sorry, but I need a little help there. *Where do I look in the modprobe man?* > Specifing IDs is probably not supported on the driver. Arguments to > MODULE_PARM() functions are not general. Each driver can specify zero or more > arguments, named just about anything. You can figure out what they are from > modinfo (specifically, the -p option). I was unable to get any output from modinfo. I do have the output from insmod -m. I'll attach that if you want to take a look. Thanks very much and let me know where I might get further help. I've already been to several newsgroups with this. Thanks very much Joe |
BEGIN:VCARD VERSION:2.1 N:LaCour;Joe;;Gérant/CEO FN:Lester traduction ORG:Lester traduction sarl;Joe LaCour TITLE:Gérant/CEO NOTE;ENCODING=QUOTED-PRINTABLE:Traduction/r=E9daction fran=E7ais-anglais=0D=0An=E9 le 21.10.46 =E0 New Orle= ans (USA)=0D=0ABA, anglais, University of New Orleans=0D=0AMA, langue et lit= t=E9rature fran=E7aises, Tulane University=0D=0ADipl=F4me de Didactique des = Langues, Paris III-Sorbonne Nouvelle=0D=0A=0D=0ATraducteur =E0 Paris depuis = 1987=0D=0ASARL Lester traduction cr=E9=E9e en 1998=0D=0A=0D=0ADomaines de sp= =E9cialisation: =0D=0A=0D=0AInformatique-Internet (traduction directe en HTM= L)=0D=0AT=E9l=E9communications=0D=0AMon=E9tique-Cartes =E0 puce=0D=0AB=E2tim= ent-industries du bois=0D=0ATechnologie industrielle-certification=0D=0AMark= eting-Communication=0D=0A=0D=0ASous-titrage du journal de 20 h de France 2 (= depuis 1989)=0D=0ATraduction/secr=E9tariat de r=E9daction presse (pendant 4 = ans pour l'hebdomadaire Smart Cards & Systems) =0D=0A=0D=0AClients: France-T= =E9l=E9com Mobiles, Verifone-HP, Innovatron-Carte et Services, Renault Cr= =E9dit International, Alcatel-Alsthom, AFNOR, IPSOS, Danone, Centre Georges= Pompidou, France 2 T=E9l=E9vision, Essilor, L'Or=E9al, etc.=0D=0A=0D=0AClie= nts agences: 4T, Technicis, Bilis Traduction, Traductor, Novatrad, etc. TEL;WORK;VOICE:01 64 14 23 50 TEL;WORK;FAX:01 64 14 23 51 ADR;WORK:;RCS Melun B 421 710 609;14, rue de Bellevue;Fontaine-le-Port;;77590;France LABEL;WORK;ENCODING=QUOTED-PRINTABLE:RCS Melun B 421 710 609=0D=0A14, rue de Bellevue=0D=0AFontaine-le-Port 77590= =0D=0AFrance EMAIL;PREF;INTERNET:[EMAIL PROTECTED] EMAIL;INTERNET:[EMAIL PROTECTED] REV:20010528T135516Z END:VCARD
