Hi,
I tried to get a sony cd writer working but w/o success.
I compiled scsi and usb support into the kernel (2.4.5).
If I try to mount scd0 I get the following message:
mount: /dev/scd0: unknown device
below is the relevant output of 'lsusb', 'dmesg' and
'cat /proc/scsi/usb-storage-0/0': The cd writer is
apparently recognized.
how do I find out on which scsi device the usb-storage
is attached ?
any help much appreciated.
--
Johannes
# cat /proc/scsi/usb-storage-0/0
cat /proc/scsi/usb-storage-0/0
Host scsi0: usb-storage
Vendor: SONY
Product: USB Mass STORAGE
Serial Number: None
Protocol: 8020i
Transport: Control/Bulk
GUID: 054c00230000000000000000
# lsusb
[...]
Bus 001 Device 002: ID 054c:0023 Sony Corporation
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 0 Interface
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x054c Sony Corporation
idProduct 0x0023
bcdDevice 2.00
iManufacturer 1 SONY
iProduct 2 USB Mass STORAGE
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x40
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 2
bInterfaceProtocol 1
iInterface 4
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 64
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 64
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 2
bInterval 100
Language IDs: 0409
# dmesg
[...]
hub.c: USB new device connect on bus1/1, assigned device number 2
usb-storage: act_altsettting is 0
usb-storage: id_index calculated to be: 26
usb-storage: Array length appears to be: 44
usb-storage: USB Mass Storage device detected
usb-storage: Endpoints: In: 0xc7f5d160 Out: 0xc7f5d174 Int: 0xc7f5d188 (Period 100)
usb-storage: New GUID 054c00230000000000000000
usb-storage: Transport: Control/Bulk
usb-storage: Protocol: 8020i
usb-storage: *** thread sleeping.
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 ff 00 23 c1 07 00 00 00
usb-storage: Call to usb_stor_control_msg() returned 12
usb-storage: usb_stor_transfer_partial(): xfer 255 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 96/255
usb-storage: CB data stage result is 0x1
usb-storage: -- CB transport device requiring auto-sense
usb-storage: Issuing auto-REQUEST_SENSE
usb-storage: Call to usb_stor_control_msg() returned 12
usb-storage: usb_stor_transfer_partial(): xfer 18 bytes
usb-storage: usb_stor_bulk_msg() returned 0 xferred 18/18
usb-storage: usb_stor_transfer_partial(): transfer complete
usb-storage: CB data stage result is 0x0
usb-storage: -- Result from auto-sense is 0
usb-storage: -- code: 0x70, key: 0x6, ASC: 0x29, ASCQ: 0x0
usb-storage: Unit Attention: (unknown ASC/ASCQ)
usb-storage: Fixing INQUIRY data to show SCSI rev 2
usb-storage: scsi cmd done, result=0x2
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (1/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (2/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (3/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (4/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (5/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (6/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (7/0)
usb-storage: *** thread sleeping.
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
[...]
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-users
