Hi,

writing a cd with cdrecord finishes with some errors here. Sometimes
the last message block (after 'CHECK CONDITION') repeats a hundreths of
times until cdrecord finishes.

I use a sony usb cdrom with usb-storage:

# scsi_info /dev/scd0
SCSI_ID="0,0,0"
MODEL="SONY CD-RW  CRX120E"
FW_REV="1.0j"

The log of a dummy write is below:

[...]
Last chance to quit, starting dummy write in 1 seconds.
Waiting for reader process to fill input buffer ... input buffer ready.
cdrecord: Input/output error. read track info: scsi sendcmd: no error
CDB:  52 01 00 00 00 FF 00 00 1C 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 C0
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid) error refers to command part, bit ptr 0 (not valid) 
field ptr 0
cmd finished after 0.010s timeout 240s
Writing  time:    0.199s
Fixating...
WARNING: Some drives don't like fixation in dummy mode.
Fixating time:    0.716s
cdrecord: Input/output error. mode select g1: scsi sendcmd: no error
CDB:  55 10 00 00 00 00 00 00 10 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 12 00 00 00 00 26 00 00 80
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (not valid) error refers to data part, bit ptr 0 (not valid) field 
ptr 0
cmd finished after 0.011s timeout 40s
cdrecord: fifo had 64 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.

what's the problem ?

-- 
   Johannes

_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-users

Reply via email to