I have sought your advice previously, without any response, but now I
have a bit more information that one of you experts might see a clue in.
I am trying to get a usb "pocketzip" drive from Iomega working with
Mandrake 8.0 (upgraded to 2.4.5 kernel). It has worked just once, when I
first connected a usb 2GB jaz drive and then umounted it. The 2GB jaz
works fine but having to install it first defeats the purpose of having
this small format, much more portable pocketzip drive. And that scenario
will only work on my notebook, not my desktop which has a scsi
controller. Any suggestions about what else I might try?
Thanks, Nelson Hogg
Here is the output from the usbview program:
USB Clik! 40
Manufacturer: OptoMedia Electronics Corp.
Serial Number: 199912000001
Speed: 12Mb/s (full)
USB Version: 1.00
Device Class: 00(>ifc )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 8
Number of Configurations: 1
Vendor Id: 0525
Product Id: a140
Revision Number: 1.00
Config Number: 1
Number of Interfaces: 1
Attributes: a0
MaxPower Needed: 500mA
Interface Number: 0
Name: usb-storage
Alternate Number: 0
Class: 08(stor.)
Sub Class: 6
Protocol: 50
Number of Endpoints: 2
Endpoint Address: 01
Direction: out
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
Endpoint Address: 82
Direction: in
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
and from dmesg:
hub.c: USB new device connect on bus1/2, assigned device number 3
usb-uhci.c: interrupt, status 3, frame# 1548
usb-uhci.c: ENXIO 80000380, flags 0, urb d59913c0, burb d5991540
usb-uhci.c: ENXIO 80000380, flags 0, urb d59913c0, burb d5991540
usb-uhci.c: ENXIO 80000380, flags 0, urb d59913c0, burb d5991540
usb-uhci.c: interrupt, status 3, frame# 1549
scsi3 : SCSI emulation for USB Mass Storage devices
usb-uhci.c: interrupt, status 3, frame# 0
usb-uhci.c: interrupt, status 3, frame# 1
usb-uhci.c: ENXIO 80000380, flags 0, urb d5991740, burb d59911c0
usb-uhci.c: ENXIO 80000380, flags 0, urb d5991740, burb d59911c0
usb-uhci.c: ENXIO 80000380, flags 0, urb d5991740, burb d59911c0
usb-uhci.c: interrupt, status 2, frame# 3
usb-uhci.c: interrupt, status 3, frame# 5
usb-uhci.c: interrupt, status 2, frame# 7
usb-uhci.c: interrupt, status 3, frame# 9
usb-uhci.c: interrupt, status 2, frame# 11
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
hub.c: already running port 2 disabled by hub (EMI?), re-enabling...
usb.c: USB disconnect on device 3
hub.c: USB new device connect on bus1/2, assigned device number 4
usb-uhci.c: ENXIO 80000480, flags 0, urb d5991140, burb d59911c0
usb-uhci.c: ENXIO 80000480, flags 0, urb d5991140, burb d59911c0
usb-uhci.c: ENXIO 80000480, flags 0, urb d5991140, burb d59911c0
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 4
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-users
