Now the Pockey is a very nifty little 20 Gig USB drive. I see no
evidence that anyone else has tried to use one, and am having little
success here. It appears on the bus just fine (after work on
unusual_devs.h) with 2.4.5 kernel:
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=05ab ProdID=0202 Rev= 1.55
S: Manufacturer=ISD
S: Product=POCKEY FLOTEC
S: SerialNumber=4249e8c7-0d24-11d3-a2bd-444553540001
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=00 Prot=ff Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
I: If#= 0 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=ff Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
I: If#= 0 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=ff Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
In the log then we get the infamous "not claimed" message:
Jun 25 12:19:53 localhost kernel: PCI: Found IRQ 11 for device 00:01.2
Jun 25 12:19:53 localhost kernel: usb-uhci.c: USB UHCI at I/O 0x9000,
IRQ 11
Jun 25 12:19:53 localhost kernel: usb-uhci.c: Detected 2 ports
Jun 25 12:19:53 localhost kernel: usb.c: new USB bus registered,
assigned bus number 1
Jun 25 12:19:53 localhost kernel: hub.c: USB hub found
Jun 25 12:19:53 localhost kernel: hub.c: 2 ports detected
Jun 25 12:19:53 localhost kernel: usb-uhci.c: v1.251 Georg Acher, Deti
Fliegl, Thomas Sailer, Roman Weissgaerber
Jun 25 12:19:53 localhost kernel: usb-uhci.c: USB Universal Host
Controller Interface driver
Jun 25 12:19:53 localhost kernel: hub.c: USB new device connect on
bus1/1, assigned device number 2
Jun 25 12:19:53 localhost kernel: usb.c: USB device 2 (vend/prod
0x5ab/0x202) is not claimed by any active driver.
Jun 25 12:19:55 localhost kernel: Initializing USB Mass Storage
driver...
Jun 25 12:19:55 localhost kernel: usb.c: registered new driver
usb-storage
Jun 25 12:19:55 localhost kernel: usb-uhci.c: interrupt, status 2,
frame# 1880
Jun 25 12:19:55 localhost kernel: usb-uhci.c: interrupt, status 3,
frame# 1881
Jun 25 12:19:55 localhost kernel: scsi0 : SCSI emulation for USB Mass
Storage devices
Jun 25 12:19:55 localhost kernel: usb-uhci.c: interrupt, status 3,
frame# 1902
Jun 25 12:19:55 localhost kernel: usb-uhci.c: interrupt, status 3,
frame# 1912
Jun 25 12:19:55 localhost kernel: usb-uhci.c: interrupt, status 3,
frame# 1923
Jun 25 12:19:55 localhost kernel: USB Mass Storage support
registered.
And, we get no device.
shiloh:/proc/scsi# cat /proc/scsi/scsi
Attached devices: none
Does anyone have ideas on this? Thanks... DaveW
--
[EMAIL PROTECTED] . . . . . . . . . . https://ecardfile.com/id/zephyr
A few hours grace before the madness begins again.
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-users
