> I now have the modules up and running. The pegasus.o module loads fine
> when i do it manually with insmod. When i try to bring up eth0 with `ifup
> eth0` it says `delaying eth0`. I looked at the /proc/bus/usb/devices and
> drivers files and everything loads correctly. I am now running a patched
> kernel from 2.2.16 to 2.4 backport USB. If anyone has experience with
> this i really need your help.
I'm on Linux-Mandrake 8.0 (kernel 2.4.3), trying to use a D-Link DSB-650TX
with the pegasus as well, and I get the same exact problem, aka:
Delaying eth1 initialization.
I have every needed modules loaded at startup (usbcore, usb-uhci, pegasus).
In /proc/bus/usb/devices, I see this:
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=ef80
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=2001 ProdID=400b Rev= 1.01
S: Manufacturer=D-Link Corp.
S: Product=DSB-650TX USB Ethernet
S: SerialNumber=7be2fd
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=156mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=00(>ifc ) Sub=00 Prot=00 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl= 1ms
which is exactly what I have. What am I missing ?
Christian Tardif
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-users
