Brian Stults wrote:
>
> Brad Hards wrote:
>
> > Brian Stults wrote:
> >
> >>I had no trouble getting this USB cable modem working with Alan Cox's
> >>patch (2.4.9-ac9). Since this is what the documentation says...
> >>
> > Good that you had success. I will try to integrate this into the Linus kernel
> > soon, I think. I just want to get the multicast stuff sorted out.
> >
> >
> >>=======================================================
> >>This driver should work with the following devices:
> >> * Ericsson PipeRider (all variants)
> >> * Motorola (DM100 and SB4100)
> >> * Broadcom Cable Modem (reference design)
> >>
> >> This driver might work with a Toshiba cable modem.
> >>=======================================================
> >>
> >>... should I email someone to let them know that I got it working? If
> >>so, whom?
> >>
> > Consider the someone advised. I'll put the Toshiba part into the docs in the
> > next update.
> >
> > Did you get the "this is broken" part in the logs?
> >
>
> The only message in syslog is the following, several times:
>
> CDCEther.c: eth0: set too many MC filters
Patch is under test to resolve this.
> But it sounds like you know that already. Let me know if you want any
> other output from syslog, /proc/bus/usb/, etc., or any information about
> my system/kernel configuration. I would be happy to oblige.
Can you send the output of dmesg, just after you plug the device in (with the
driver loaded), but before you initialise / configure it?
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
