Hi,
I'd like to know how to add support for the Digital Camera I'd just bought.
It looks like it's a USB mass Storage one (appears as a removable disk in
W98, doc claims there is no extra driver needed for Win/ME or 2000)
Can someone point me to the relevant doc. From what I've learnt at reading
recently this lists, I need to add an UNUSUAL_DEV entry
I've added this one without being positive about the parameters :
UNUSUAL_DEV( 0x0784, 0x1310, 0x0000, 0x0000,
"Vivitar",
"Vivicam 3305",
US_SC_SCSI, US_PR_CB, NULL,
US_FL_SINGLE_LUN ),
I've added usb-storage into the kernel (USB works fine by itself (my DSL
modem is USB) as SCSI (my hard drive))
Eventually it doesn't work but it was a first guess without a lot of info,
hence this post.
here is the device entry:
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 9 Spd=12 MxCh= 0
D: Ver= 0.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=0784 ProdID=1310 Rev= 0.00
S: Manufacturer=HHH
S: Product=DIGITAL CAMERA
S: SerialNumber=4810816
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=05 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
--
Jean-Marc
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
