I am a newbie and recently installed Linux PPCQ4 on my powermac and
I have some trouble getting my Keyspan twin serial adapter to work:
Can anybody help me?
Computer: B&W G3
Kernel: 2.2.18
Keyspan is a version of the USA28, connected to a serial modem
V90.
I created two tty devices by mknod in /dev/usb/ttyusb0 and usb1
I created a link /dev/modem to /dev/usb/ttyusb0 (by the way does the name of
the device really matters? )
I loaded usbserial.o and keyspan.o by modprobe (do I need to load both?)
and I added these two in /etc/modules.conf so that they load automatically
(is that the right thing to do?)
The keyspan seems to be recognized in /proc/bus/usb/devices (I see a line
with Keyspan there. but is there a better way to check that my modem is
recognized ?)
Then when I try to use the modem by wvdial or kppp, the complete kernel
freezes I have to reboot! (is there a simpler way to check the modem?)
Do I need a later version of usbserial or keyspan.o? How can I check the
version?
Any hint appreciated...
Bruno.
############################################################
This email message is for the sole use of the intended
recipient(s) and may contain confidential and privileged
information. Any unauthorized review, use, disclosure or
distribution is prohibited. If you are not the intended
recipient, please contact the sender by reply email and
destroy all copies of the original message. Any views
expressed in this message are those of the individual
sender, except where the sender specifically states them
to be the views of Intelsat, Ltd. and its subsidiaries.
############################################################
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
