Hi,
I have compiled the USB support in my kernel
2.4.13. but i cant get either of them working.
I have a microtek scanner and a logitek
quickcam express webcam, connected to my
2 usb port.
Can u help me get these two working ?
xsane says no devices found ?? and
xv_tv also says no such device /dev/video0
but /dev/video0 is a char file present.
also i have the proper setup in
/proc/bus/usb.
Following are some of the messages in dmesg
abt usb detection
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
uhci.c: USB Universal Host Controller Interface driver
v1.1
PCI: Found IRQ 5 for device 00:07.2
IRQ routing conflict for 00:07.2, have irq 10, want
irq 5
IRQ routing conflict for 00:07.3, have irq 10, want
irq 5
PCI: Sharing IRQ 5 with 00:0a.0
uhci.c: USB UHCI at I/O 0xa400, IRQ 10
usb.c: new USB bus registered, assigned bus number 1
uhci.c: detected 2 ports
usb.c: kmalloc IF cff48580, numif 1
usb.c: new device strings: Mfr=0, Product=2,
SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB UHCI-alt Root Hub
SerialNumber: a400
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface cff48580
usb.c: call_policy add, num 1 -- no FS yet
uhci.c: USB UHCI at I/O 0xa800, IRQ 10
usb.c: new USB bus registered, assigned bus number 2
uhci.c: detected 2 ports
usb.c: kmalloc IF cff48780, numif 1
usb.c: new device strings: Mfr=0, Product=2,
SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB UHCI-alt Root Hub
SerialNumber: a800
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface cff48780
usb.c: call_policy add, num 1 -- no FS yet
usb.c: registered new driver usbscanner
scanner.c: 0.4.6:USB Scanner Driver
usb.c: registered new driver usblp
printer.c: v0.8:USB Printer Device Class driver
usb.c: registered new driver audio
audio.c: v1.0.0:USB Audio Class driver
usb.c: registered new driver microtekX6
microtek.c: v0.4.3:Microtek Scanmaker X6 USB scanner
driver
Initializing USB Mass Storage driver...uhci.c:
root-hub INT complete: port1: 49b port2: 49b data: 6
hub.c: port 1 connection change
hub.c: port 1, portstatus 101, change 3, 12 Mb/s
uhci.c: root-hub INT complete: port1: 49b port2: 49b
data: 6
hub.c: port 1 connection change
hub.c: port 1, portstatus 101, change 3, 12 Mb/s
hub.c: port 1, portstatus 103, change 0, 12 Mb/s
hub.c: USB new device connect on bus1/1, assigned
device number 2
uhci.c: root-hub INT complete: port1: 58a port2: 58a
data: 6
uhci.c: a800: suspend_hc
usb.c: kmalloc IF cff48a80, numif 1
usb.c: new device strings: Mfr=3, Product=1,
SerialNumber=0
usb.c: USB device number 2 default language ID 0x409
Manufacturer: Primax
Product: USB Scanner
usb.c: unhandled interfaces on device
usb.c: USB device 2 (vend/prod 0x461/0x347) is not
claimed by any active driver.
Length = 18
DescriptorType = 01
USB version = 1.00
Vendor:Product = 0461:0347
MaxPacketSize0 = 8
NumConfigurations = 1
Device version = 0.04
Device Class:SubClass:Protocol = 00:00:00
Per-interface classes
Configuration:
bLength = 9
bDescriptorType = 02
wTotalLength = 0020
bNumInterfaces = 01
bConfigurationValue = 01
iConfiguration = 00
bmAttributes = 40
MaxPower = 48mA
Interface: 0 iInterface = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 81 (in)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 02 (out)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
usb.c: kusbd: /sbin/hotplug add 2
hub.c: port 2 connection change
hub.c: port 2, portstatus 101, change 3, 12 Mb/s
uhci.c: root-hub INT complete: port1: 495 port2: 68a
data: 4
hub.c: port 2, portstatus 103, change 0, 12 Mb/s
hub.c: USB new device connect on bus1/2, assigned
device number 3
usb.c: kmalloc IF cff48b80, numif 1
usb.c: new device strings: Mfr=0, Product=1,
SerialNumber=0
usb.c: USB device number 3 default language ID 0x409
Product: Camera
usb.c: unhandled interfaces on device
usb.c: USB device 3 (vend/prod 0x46d/0x840) is not
claimed by any active driver.
Length = 18
DescriptorType = 01
USB version = 1.00
Vendor:Product = 046d:0840
MaxPacketSize0 = 8
NumConfigurations = 1
=====
best regards
bhaskar
__________________________________________________
Do You Yahoo!?
Find a job, post your resume.
http://careers.yahoo.com
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
