This camera works as a standard USB storage device, and so I figured I was reasonably safe in upgrading my last remaining machine to Linux. Unfortunately, I have not been able to get it working. I am running RedHat 7.1, and I have tried all the precompiled kernels available for RH, 2.4.2-2, 2.4.9-6, and 2.4.13-0.5 and I get essentially the same problem. The camera appears to connect briefly, but is then disconnected. I've tried it on a couple of different machines (Athlon 1.2GHz/Asus A7V & Compaq M700/P3-500 laptop) with the same results. Here is the trace from /var/log/messages with 2.4.13-0.5, the current RawHide kernel:
Nov 13 09:14:30 beryllium kernel: hub.c: USB new device connect on bus1/1, assigned device number 2 Nov 13 09:14:30 beryllium kernel: usb.c: USB device 2 (vend/prod 0x1132/0x4331) is not claimed by any active driver. Nov 13 09:14:30 beryllium kernel: SCSI subsystem driver Revision: 1.00 Nov 13 09:14:30 beryllium kernel: Initializing USB Mass Storage driver... Nov 13 09:14:30 beryllium kernel: usb.c: registered new driver usb-storage Nov 13 09:14:30 beryllium kernel: usb-uhci.c: interrupt, status 2, frame# 1498 Nov 13 09:14:31 beryllium kernel: usb_control/bulk_msg: timeout Nov 13 09:14:31 beryllium kernel: scsi0 : SCSI emulation for USB Mass Storage devices Nov 13 09:14:37 beryllium kernel: usb-uhci.c: interrupt, status 3, frame# 316 Nov 13 09:14:42 beryllium kernel: usb_control/bulk_msg: timeout Nov 13 09:14:47 beryllium kernel: usb_control/bulk_msg: timeout Nov 13 09:14:47 beryllium kernel: usb.c: USB disconnect on device 2 Nov 13 09:14:51 beryllium kernel: usb_control/bulk_msg: timeout Nov 13 09:14:51 beryllium kernel: hub.c: USB device not accepting new address (error=-110) Nov 13 09:14:51 beryllium kernel: hub.c: USB new device connect on bus1/1, assigned device number 3 Nov 13 09:14:55 beryllium kernel: usb_control/bulk_msg: timeout Nov 13 09:14:55 beryllium kernel: usb.c: USB device not accepting new address=3 (error=-110) Nov 13 09:14:56 beryllium kernel: hub.c: USB new device connect on bus1/1, assigned device number 4 Nov 13 09:14:56 beryllium kernel: usb-storage: host_reset() requested but not implemented Nov 13 09:15:00 beryllium kernel: usb_control/bulk_msg: timeout Nov 13 09:15:00 beryllium kernel: usb.c: USB device not accepting new address=4 (error=-110) Nov 13 09:15:06 beryllium kernel: scsi: device set offline - command error recover failed: host 0 channel 0 id 0 lun 0 Nov 13 09:15:06 beryllium kernel: USB Mass Storage support registered. Please let me know if you have any suggestions. Thanks, Ravi _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
