HI Holger,
Sure sounds like your laptop has an OHCI controller and therefore
a driver for a UHCI controller won't work with it (ie there is no UHCI
device).
rgeards,
Stephen.
On Thu, 27 Sep 2001, Holger Massek wrote:
> When I try to install uhci host controller driver module via
> "modprobe usb-uhci" I always get following error:
> init_module: No such device
> The same result with usb-uhci module.
> Loading module usb-ohci works fine. But this one doesn't match the requirements of
>my USB-ISDN adapter (AVM Fritz!X).
>
> my hardware: Toshiba Satellite 320 CDT
> kernel version: 2.4.4-4GB (SUSE 7.2)
>
> cat /proc/ioports:
> ------------------------
> 0000-001f : dma1
> 0020-003f : pic1
> 0040-005f : timer
> 0060-006f : keyboard
> 0070-007f : rtc
> 0080-008f : dma page reg
> 00a0-00bf : pic2
> 00c0-00df : dma2
> 00f0-00ff : fpu
> 0170-0177 : ide1
> 01f0-01f7 : ide0
> 0280-02ff : cb_enabler
> 0376-0376 : ide1
> 03c0-03df : vga+
> 03e8-03ef : serial_cs
> 03f6-03f6 : ide0
> 03f8-03ff : serial(auto)
> 0cf8-0cff : PCI conf1
> ffe0-ffff : PCI device 1179:0701
>
>
> cat /proc/interrupts
> ---------------------------
> CPU0
> 0: 583645 XT-PIC timer
> 1: 3490 XT-PIC keyboard
> 2: 0 XT-PIC cascade
> 3: 248 XT-PIC eth0
> 8: 2 XT-PIC rtc
> 12: 0 XT-PIC PS/2 Mouse
> 14: 3672 XT-PIC ide0
> 15: 8 XT-PIC ide1
> NMI: 0
> ERR: 0
> MIS: 0
>
> Where comes the error message from?
> And what to do to get the uhci module installed?
> Has anyone an idea?
> Thanks
>
> Holger Massek
>
--
/------------------------------------+-------------------------\
|Stephen J. Gowdy | SLAC, MailStop 17, |
|http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, |
| | Menlo Park CA 94025, USA |
|EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 |
\------------------------------------+-------------------------/
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
