On Tue, Nov 27, 2001 at 05:57:58PM -0800, Scott Bronson wrote: > I own a Mitsubishi Diamond Pro 2040u monitor. It has a built-in > USB hub for the monitor and keyboard. The problem is, when I plug > this hub into my computer, I get a ton of timeout delays and error > messages. Something is going very wrong. > > Amazingly, after about 5 minutes of thrashing (see the end of the > dmesg log below), everything sorts out and the hub starts to work! > However, there's still a problem: /proc/bus/usb/devices is very > garbled.
I posted almost the exact same problem a couple of days ago. If you find anything out, let me know. I get timeouts for two minutes before the HID driver lists it as connected. I used to have my USB keyboard attached to the same port that the monitor outputs on, and my keyboard wouldn't activate until that particular port finished timing out and was registered by the USB stack under linux. -- Adrian Chung (adrian at enfusion-group dot com) http://www.enfusion-group.com/~adrian GPG Fingerprint: C620 C8EA 86BA 79CC 384C E7BE A10C 353B 919D 1A17 [toad.enfusion-group.com] up 1 day, 5:49, 7 users _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
