I'm running an OV511 based webcam which is workind fine except for the following problem. Periodically, for no apparant reason, the camera disconnects causing the following errors in the messages file...
Oct 8 10:04:06 lyximer kernel: usb.c: USB disconnect on device 6 Oct 8 10:04:08 lyximer kernel: hub.c: USB new device connect on bus1/1, assigned device number 7 Oct 8 10:04:08 lyximer kernel: ov511.c: USB OV511+ camera found Oct 8 10:04:08 lyximer kernel: ov511.c: camera: Puretek PT-6007 Oct 8 10:04:08 lyximer kernel: ov511.c: Sensor is an OV7610 Oct 8 10:05:38 lyximer kernel: hub.c: already running port 1 disabled by hub (EMI?), re-enabling... Oct 8 10:05:38 lyximer kernel: usb.c: USB disconnect on device 7 Oct 8 10:05:38 lyximer kernel: hub.c: USB new device connect on bus1/1, assigned device number 8 Oct 8 10:05:38 lyximer kernel: ov511.c: USB OV511+ camera found Oct 8 10:05:38 lyximer kernel: ov511.c: camera: Puretek PT-6007 Oct 8 10:05:38 lyximer kernel: ov511.c: Sensor is an OV7610 The camera is then redected and works again (until the next time) without problems. This behaviour is the same on both ports 1 and 2 with or without an additional USB hub or other devices attatched. Anyone else experienced this problem or care to shed a little light on the subject. I'm using the camera in conjunction with the "motion" software.. although the problem appears the same even just using vidcat (looped by a shell script to capture the image every second). Thanks again, Yours, Ross McKillop [EMAIL PROTECTED] _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
