Hello Johannes,
> lsusb and usbview just show the devices that have been enumerated
> successfully.
>
> It sounds like the device didn't get enumerated. Does 'dmesg' show
> anything interesting?
>
> JE
I attached you the output of dmesg and lsusb .. I can't make a rime of it :-(
Hope you can help me further.
Thanks in advance,
Felix
Linux version 2.2.18 ([EMAIL PROTECTED]) (gcc version 2.95.2 19991024 (release)) #1
Fri Jan 19 22:10:35 GMT 2001
BIOS-provided physical RAM map:
BIOS-e820: 0009f000 @ 00000000 (usable)
BIOS-e820: 1feec000 @ 00100000 (usable)
Detected 857646 kHz processor.
ide_setup: hdd=ide-scsi
Console: colour VGA+ 80x25
Calibrating delay loop... 1710.48 BogoMIPS
Memory: 516468k/524208k available (1668k kernel code, 408k reserved, 5576k data, 88k
init, 0k bigmem)
Dentry hash table entries: 65536 (order 7, 512k)
Buffer cache hash table entries: 524288 (order 9, 2048k)
Page cache hash table entries: 131072 (order 7, 512k)
Inode hash table entries: 32768 (256k), inode-max: 32763
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: L1 I Cache: 64K L1 D Cache: 64K
CPU: L2 Cache: 256K
CPU: AMD Athlon(tm) Processor stepping 02
Enabling fast FPU save and restore... done.
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch ([EMAIL PROTECTED])
PCI: PCI BIOS revision 2.10 entry at 0xf10f0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 524288 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 64000K size
loop: registered device at major 7
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 21
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xd800-0xd807, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xd808-0xd80f, BIOS settings: hdc:DMA, hdd:DMA
PDC20265: IDE controller on PCI bus 00 dev 88
PDC20265: chipset revision 2
PDC20265: not 100% native mode: will probe irqs later
PDC20265: (U)DMA Burst Bit DISABLED Primary PCI Mode Secondary PCI Mode.
PDC20265: FORCING BURST BIT 0x00 -> 0x01 ACTIVE
ide2: BM-DMA at 0x8000-0x8007, BIOS settings: hde:pio, hdf:pio
ide3: BM-DMA at 0x8008-0x800f, BIOS settings: hdg:pio, hdh:pio
hda: IBM-DTLA-305040, ATA DISK drive
hdb: IBM-DTLA-305040, ATA DISK drive
hdc: SAMSUNG DVD-ROM SD-608, ATAPI CDROM drive
hdd: RICOH CD-R/RW MP7080A, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: IBM-DTLA-305040, 39266MB w/380kB Cache, CHS=5005/255/63
hdb: IBM-DTLA-305040, 39266MB w/380kB Cache, CHS=5005/255/63
hdc: ATAPI 32X DVD-ROM drive, 512kB Cache
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
LVM version 0.9 by Heinz Mauelshagen (13/11/2000)
lvm -- Driver successfully initialized
md driver 0.90.0 MAX_MD_DEVS=256, MAX_REAL=12
linear personality registered
raid0 personality registered
raid1 personality registered
raid5 personality registered
raid5: measuring checksumming speed
raid5: MMX detected, trying high-speed MMX checksum routines
pII_mmx : 1994.916 MB/sec
p5_mmx : 2496.693 MB/sec
8regs : 1153.668 MB/sec
32regs : 930.402 MB/sec
using fastest function: p5_mmx (2496.693 MB/sec)
scsi : 0 hosts.
scsi : detected total.
md.c: sizeof(mdp_super_t) = 4096
Partition check:
hda: hda1 hda2 hda3
hdb: hdb1 hdb2 hdb3 hdb4
autodetecting RAID arrays
autorun ...
... autorun DONE.
apm: BIOS version 1.2 Flags 0x0b (Driver version 1.13)
Checking ReiserFS transaction log (device 03:03) ...
Using tea hash to sort names
please visit www.reiserfs.org for sponsor information
ReiserFS version 3.5.28
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 88k freed
Adding Swap: 441776k swap-space (priority -1)
/dev/vmmon: Module vmmon: registered with major=10 minor=165 tag=$Name: build-799 $
/dev/vmmon: Module vmmon: initialized
parport0: PC-style at 0x378 (0x778) [SPP,ECP,ECPEPP,ECPPS2]
ppuser: User-space parallel port driver
/dev/vmnet: open called by PID 217 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: peer interface eth0 not found, will wait for it to come up
bridge-eth0: attached
/dev/vmnet: open called by PID 227 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
eth0: 8139too FastEthernet driver 0.9.10-2.2 Jeff Garzik <[EMAIL PROTECTED]>
eth0: Linux-2.2 bug reports to Jens David <[EMAIL PROTECTED]>
eth0: RealTek RTL8139 Fast Ethernet board found at 0xe0156000, IRQ 10
eth0: Chip is 'RTL-8139C' - MAC address '00:e0:4c:69:12:27'.
bridge-eth0: found peer eth0
bridge-eth0: up
/dev/vmnet: open called by PID 242 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.237 $ time 22:24:29 Jan 19 2001
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
usb.c: USB new device connect, assigned device number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
usb.c: USB new device connect, assigned device number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: registered new driver hid
eth0: Setting full-duplex based on MII #32 link partner ability of 41e1.
usb.c: USB new device connect, assigned device number 2
usb-uhci.c: ENXIO 84000280, flags 0, urb de96f340, burb de96f2a0
usb.c: error getting string descriptor 0 (error=-6)
usb-uhci.c: ENXIO 84000280, flags 0, urb de96f340, burb de96f2a0
usb.c: error getting string descriptor 0 (error=-6)
usb-uhci.c: ENXIO 84000280, flags 0, urb de96f340, burb de96f2a0
usb.c: error getting string descriptor 0 (error=-6)
usb-uhci.c: ENXIO 84000280, flags 0, urb de96f340, burb de96f2a0
usb.c: error getting string descriptor 0 (error=-6)
usb-uhci.c: ENXIO 84000280, flags 0, urb de96f340, burb de96f2a0
usb.c: error getting string descriptor 0 (error=-6)
usb-uhci.c: ENXIO 84000280, flags 0, urb de96f340, burb de96f2a0
usb.c: error getting string descriptor 0 (error=-6)
usb.c: USB device 2 (prod/vend 0x4b4/0x100) is not claimed by any active driver.
hub.c: already running port 2 disabled by hub (EMI?), re-enabling...
usb.c: USB disconnect on device 2
usb.c: USB new device connect, assigned device number 2
usb.c: USB device 2 (prod/vend 0x4b4/0x100) is not claimed by any active driver.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
usb.c: USB new device connect, assigned device number 2
hub.c: USB hub found
hub.c: 4 ports detected
hub.c: already running port 2 disabled by hub (EMI?), re-enabling...
usb.c: USB disconnect on device 2
usb.c: USB new device connect, assigned device number 2
hub.c: USB hub found
hub.c: 4 ports detected
Bus 002 Device 001: ID 0000:0000 Virtual Hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000 Virtual
idProduct 0x0000 Hub
bcdDevice 0.00
iManufacturer 0
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x40
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 8
bInterval 255
Language IDs: 0000
Bus 002 Device 002: ID 058f:9254 Alcor Micro, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x058f Alcor Micro, Inc.
idProduct 0x9254
bcdDevice 1.00
iManufacturer 1 ALCOR
iProduct 2 Generic USB Hub
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0xe0
Self Powered
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 1
bInterval 255
Language IDs: 0409
Bus 001 Device 001: ID 0000:0000 Virtual Hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000 Virtual
idProduct 0x0000 Hub
bcdDevice 0.00
iManufacturer 0
iProduct 2
iSerial 1
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x40
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 8
bInterval 255
Language IDs: 0000
Bus 001 Device 002: ID 04b4:0100 Cypress Semiconductor
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 0 Interface
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x04b4 Cypress Semiconductor
idProduct 0x0100
bcdDevice 0.01
iManufacturer 1
iProduct 2 USB Keyboard I/F
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 4
bmAttributes 0xa0
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Devices
bInterfaceSubClass 1 Boot Interface Subclass
bInterfaceProtocol 1 Keyboard
iInterface 5 EndPoint1 Interrupt
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 1.00
bCountryCode 0
bNumDescriptors 1
bDescriptorType 34
wDescriptorLength 63
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 8
bInterval 10
Language IDs: 0409
