I'm trying to get access to the memory stick in my Sony trv730. /proc/bus/usb/devices contains:
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=054c ProdID=002e Rev= 3.00 S: Manufacturer=Sony S: Product=Sony Handycam C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 2mA I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=ff Prot=01 Driver=(none) E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=255ms I loaded the usb-storage module, but still can't seem to get a driver to work with this thing. I noted that it should mount as a scsi device. Which mod is the proper device? I was suspecting sg.o assuming this was the generic scsi. I've been digging through the docs, but can't seem to find any specific info on the necessary modules. Are there other mods I need? Thanks for any assistance. -- Until later: Geoffrey [EMAIL PROTECTED] "...the system (Microsoft passport) carries significant risks to users that are not made adequately clear in the technical documentation available." - David P. Kormann and Aviel D. Rubin, AT&T Labs - Research - http://www.avirubin.com/passport _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
