Hi I'm trying to install my Sony CLIE using the visor module. I followed the description of Kreucher (http://kreucher.user.msu.edu/clie) but when I load the module it isn't able to mount the device.
Below are the kernel messages: When I modprobe the visor module everything goes smoothly kernel: usb.c: registered new driver serial kernel: usbserial.c: USB Serial Driver core v1.4 kernel: usbserial.c: USB Serial support registered for Handspring Visor kernel: usbserial.c: USB Serial support registered for Palm 4.0 kernel: usbserial.c: USB Serial support registered for Sony Cli� 3.5 kernel: usbserial.c: USB Serial support registered for Sony Cli� 4.0 kernel: visor.c: USB HandSpring Visor, Palm m50x, Sony Cli� driver v1.5 But when I HotSync I get an error message kernel: hub.c: USB new device connect on bus1/1, assigned device number 3 kernel: usbserial.c: Sony Cli� 3.5 converter detected kernel: usbserial.c: Sony Cli� 3.5 converter now attached to ttyUSB0 (or usb/tts/0 for devfs) usbmgr[289]: vendor:0x54c product:0x38 usbmgr[289]: class:0xf subclass:0x0 protocol:0x0 usbmgr[289]: USB device isn't matched the configuration usbmgr[421]: vendor:0x54c product:0x38 usbmgr[421]: class:0xf subclass:0x0 protocol:0x0 usbmgr[421]: USB device isn't matched the configuration usbmgr[425]: vendor:0x54c product:0x38 usbmgr[425]: class:0xf subclass:0x0 protocol:0x0 usbmgr[425]: USB device isn't matched the configuration usbmgr[289]: open error "/etc/usbmgr/class/module" usbmgr[421]: open error "/etc/usbmgr/class/module" usbmgr[425]: open error "/etc/usbmgr/class/module" kernel: usb.c: USB disconnect on device 3 kernel: usbserial.c: Sony Cli� 3.5 converter now disconnected from ttyUSB0 I'm using kernel 2.4.15 and Clie Peg-S300/E with PalmOS 3.5.2. All help is welcome. Thanks EJ _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
