Hello, everyone. Please help me to sey up my USB mouse.
I have just bought Microsoft compatible Wheel Mouse Optical USB
and recompiled my kernel, but my mouse does not work.
I am running Debian GNU/Linux Potato with Linux Kernel 2.2.20.
In many aspects, USB seems to work but mouse does not.
USB Controllers are (At Windows98's System Properties):
VIA Tech 3038 PCI to USB Universal Host Controller, irq 10
IO is d400 - d41F, and d800 - d81F
HID Compliant Mouse.
At compile option (make menuconfig), I have put UHCI code.
Someone told me that I must '32 USB Mouse' line in /proc/misc but I have
not.
I do not know what to do. You can see other /proc files and dmesg under:
/proc/devices
180 usb
/proc/interrupts
10: 31 XT-PIC usb-uhci, usb-uhci
/proc/ioports
d400 - d413 : usb-uhci
d800 - d813 : usb-uhci
/proc/pci
BUS 0, device 7, function 2:
USB Controller: VIA Technologies VT 82C586 Apollo USB (rev 14)
... blablabla....
and I have nothing under /proc/bus/usb/
The dmesg lines related to usb are:
Detected PS/2 Mouse Port.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: registered new driver usbscanner
scanner.c: USB Scanner support registered.
usb-uhci.c: $Revision: 1.237 $ time 21:56:55 Dec 17 2001
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 10
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
usb.c: USB new device connect, assigned device number 1
usb.c: kmalloc IF d7e72380, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB UHCI Root Hub
SerialNumber: d400
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface d7e72380
usb.c: call_policy add, num 1 -- no FS yet
usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 10
usb-uhci.c: Detected 2 ports
hub.c: port 1 connection change
hub.c: port 1, portstatus 301, change 3, 1.5 Mb/s
usb.c: new USB bus registered, assigned bus number 2
usb.c: USB new device connect, assigned device number 1
usb.c: kmalloc IF d7e725c0, numif 1
usb.c: new device strings: Mfr=0, Product=2, SerialNumber=1
usb.c: USB device number 1 default language ID 0x0
Product: USB UHCI Root Hub
SerialNumber: d800
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface d7e725c0
usb.c: call_policy add, num 1 -- no FS yet
usb.c: registered new driver usb_mouse
hub.c: port 1, portstatus 303, change 0, 1.5 Mb/s
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: USB new device connect, assigned device number 2
usb.c: kmalloc IF d7e72940, numif 1
usb.c: skipped 1 class/vendor specific interface descriptors
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0
usb.c: USB device number 2 default language ID 0x409
Manufacturer: Microsoft
Product: Microsoft Wheel Mouse Optical�
usb-uhci.c: interrupt, status 3, frame# 980
input0: Microsoft Microsoft Wheel Mouse Optical� on usb1:2.0
usb.c: usb_mouse driver claimed interface d7e72940
usb.c: kusbd: /sbin/hotplug add 2
hub.c: port 2 connection change
hub.c: port 2, portstatus 101, change 3, 12 Mb/s
hub.c: port 2, portstatus 103, change 0, 12 Mb/s
hub.c: USB new device connect on bus1/2, assigned device number 3
usb.c: USB new device connect, assigned device number 3
usb.c: kmalloc IF d7e72b80, numif 1
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0
usb.c: USB device number 3 default language ID 0x409
Manufacturer: EPSON
Product: Perfection610
usb.c: usbscanner driver claimed interface d7e72b80
usb.c: kusbd: /sbin/hotplug add 3
hub.c: port 1 connection change
hub.c: port 1, portstatus 100, change 3, 12 Mb/s
hub.c: port 2 connection change
hub.c: port 2, portstatus 100, change 3, 12 Mb/s
hub.c: port 1 enable change, status 100
hub.c: port 2 enable change, status 100
I will be very happy if you give me some comments.
May the Mercy of Jesus and the spirit of free software be with you for ever.
--
--------------------------------------------
Jam Lee :
Mail me at [EMAIL PROTECTED]
Or at [EMAIL PROTECTED]
Visit GNU Korea at http://korea.gnu.org/
"Jesus" is Lord of All.
--------------------------------------------
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
