Again thanks for your help, I dident get the chance to respond until after I
got home from vacation.
I tried 2.4.17 and it still dident work, still having issues getting scsi to
recognise the usb-storage device.
again my configuration is. slackware 8.0, kernel 2.4.17, sony DSC P-50
camera
I am not using devfs, I have scsi and usb components compiled as modules,
usbdevfs is mounted on /proc/bus/usb and is functioning. I do not have a
real scsi controller.
here is the procedure I am using to set it up.
root@entelin:/# modprobe usb-storage
root@entelin:/# lsmod
Module Size Used by
NVdriver 723248 14
sd_mod 10864 0 (autoclean) (unused)
usb-storage 97888 0 (unused)
scsi_mod 89792 1 [sd_mod usb-storage]
mousedev 3968 1
hid 19008 0 (unused)
input 3552 0 [mousedev hid]
3c59x 25632 1
emu10k1 58816 2
sound 56848 0 [emu10k1]
ac97_codec 9600 0 [emu10k1]
lp 6816 0 (unused)
parport_pc 15648 1
parport 26784 1 [lp parport_pc]
root@entelin:/# cd /proc/bus/usb
root@entelin:/proc/bus/usb# ls
001 002 devices drivers
root@entelin:/proc/bus/usb# cat drivers
usbdevfs
hub
96-111: hiddev
hid
usb-storage
root@entelin:/proc/bus/usb# cat devices
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=d000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=054c ProdID=0010 Rev= 3.28
S: Manufacturer=Sony
S: Product=Sony DSC
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=ff Prot=01 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 93/900 us (10%), #Int= 1, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=056a ProdID=0020 Rev= 1.01
S: Manufacturer=Tablet
S: Product=GD-0405-U
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 10 Ivl= 5ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=1.5 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=046d ProdID=c012 Rev=13.00
S: Manufacturer=Logitech
S: Product=USB-PS/2 Optical Mouse
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 98mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl= 10ms
(
I have a usb mouse, wacom tablet, and the camera plugged in as you can see
I have tried to disconnect the other usb devices to simplify the situation
however it does the same thing.
)
root@entelin:/proc/bus/usb# cd ../../scsi
root@entelin:/proc/scsi# ls
scsi
root@entelin:/proc/scsi# cat scsi
Attached devices: none
(however scsi doesnt see it?)
root@entelin:/proc/scsi# cd /mnt
root@entelin:/mnt# mount -t msdos /dev/sda1 ./cam
mount: /dev/sda1 is not a valid block device
(and of course I cant mount it)
Well... cut and paste is a good thing
Thanks for your help :)
_________________________________________________________________
Send and receive Hotmail on your mobile device: http://mobile.msn.com
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
