Hi all.
I have a RH7.2 with a Polished 2.4.16 kernel, and I'm having problems
getting my CameraMate to work. I could use some help figuring this out,
I can't tell what is wrong.
I add *.* tty11 to syslog.conf, and plug in the device, and get:
hub.c: USB new device connect bus 1/2, assigned device number 3
And I get nothing else.
A quick look at /proc/scsi/scsi shows me it is my only scsi device:
Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: eUSB Model: Compact Flash Rev: 1
Type: Direct-Access ANSI SCSI revision: 02
And a quick look at /proc/scsi/usb-storage-0/0 tells me it recognises my
CameraMate:
Host scsi0: usb-storage
Vendor: Microtech International, Inc
Product: DPCM-USB
Serial Number: None
Protocol: Transparent SCSI
Transport: Control/Bulk-EUSB/SDDR09
GUID: 07af00060000000000000000
Attached: Yes
Nonetheless, lsmod shows usb-storage:
usb-storage 55724 0
And I get these errors:
[root@beast root]# fdisk /dev/sda
Unable to read /dev/sda
[root@beast root]# mount /dev/sda /mnt/dpcm
/dev/sda: Input/output error
mount: you must specify the filesystem type
(/proc/bus/usb/devices tells me:
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=d800
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=07af ProdID=0006 Rev= 1.00
S: Manufacturer=Microtech International, Inc
S: Product=DPCM-USB
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=255ms
)
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
