On 14 Jan 2002, Dancer Vesperman wrote:

> What mobo chipset? I've _finally_ managed to fix this behaviour with
> VIA.
>
I hope this helps a bit.. Sorry for the length.

Selected output from hwinfo:

  <6>usb.c: registered new driver usbdevfs
  <6>usb.c: registered new driver hub
  <6>uhci.c: USB Universal Host Controller Interface driver v1.1
  <6>usb-uhci.c: $Revision: 1.268 $ time 14:28:38 Dec 18 2001
  <6>usb-uhci.c: High bandwidth mode enabled
  <6>usb-uhci.c: v1.268:USB Universal Host Controller Interface driver
  <6>PCI: Found IRQ 9 for device 00:02.0
  <6>usb-ohci.c: USB OHCI at membase 0xe0a73000, IRQ 9
  <6>usb-ohci.c: usb-00:02.0, PCI device 10b9:5237
  <6>usb.c: new USB bus registered, assigned bus number 1
  <6>hub.c: USB hub found
  <6>hub.c: 4 ports detected
  <6>PCI: Found IRQ 5 for device 00:06.0
  <6>usb-ohci.c: USB OHCI at membase 0xe0a75000, IRQ 5
  <6>usb-ohci.c: usb-00:06.0, PCI device 10b9:5237
  <6>usb.c: new USB bus registered, assigned bus number 2
  <6>hub.c: USB hub found
  <6>hub.c: 2 ports detected
.
.
.
----- /proc/bus/usb/devices -----
  T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
  B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
  D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
  P:  Vendor=0000 ProdID=0000 Rev= 0.00
  S:  Product=USB OHCI Root Hub
  S:  SerialNumber=e0a75000
  C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
  I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
  E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
  T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 4
  B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
  D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
  P:  Vendor=0000 ProdID=0000 Rev= 0.00
  S:  Product=USB OHCI Root Hub
  S:  SerialNumber=e0a73000
  C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
  I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
  E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
----- /proc/bus/usb/devices end -----
----- usb device info -----
  2:1 (@2:0) 2 1500000
  vend 0x0000, dev 0x0000, rev 0x0000
  cls/sub/prot: 0x09/0x00/0x00  0x09/0x00/0x00
  driver "hub"
  product "USB OHCI Root Hub"
  serial "e0a75000"

  1:1 (@1:0) 4 1500000
  vend 0x0000, dev 0x0000, rev 0x0000
  cls/sub/prot: 0x09/0x00/0x00  0x09/0x00/0x00
  driver "hub"
  product "USB OHCI Root Hub"
  serial "e0a73000"
.
.
.

15: PCI 02.0: 0c03 USB Controller (OHCI)
  [Created at pci.64]
  Unique ID: _Znp.gKfOPhox0n3
  Model: "Acer Laboratories Inc. [ALi] M5237 USB"
  Vendor: 10b9 "Acer Laboratories Inc. [ALi]"
  Device: 5237 "M5237 USB"
  SubVendor: 10b9 "Acer Laboratories Inc. [ALi]"
  SubDevice: 5237 "?"
  Revision: 0x03
  Memory Range: 0xe4800000-??? (rw,non-prefetchable)
  IRQ: 9 (135328 events)
  Config Status: cfg=new, avail=yes, crit=no

16: PCI 06.0: 0c03 USB Controller (OHCI)
  [Created at pci.64]
  Unique ID: H0_h.gKfOPhox0n3
  Model: "Acer Laboratories Inc. [ALi] M5237 USB"
  Vendor: 10b9 "Acer Laboratories Inc. [ALi]"
  Device: 5237 "M5237 USB"
  SubVendor: 10b9 "Acer Laboratories Inc. [ALi]"
  SubDevice: 5237 "?"
  Revision: 0x03
  Memory Range: 0xe3800000-??? (rw,non-prefetchable)
  IRQ: 5 (6 events)
  Config Status: cfg=new, avail=yes, crit=no





> D
>
>
> On Sat, 2002-01-12 at 22:55, [EMAIL PROTECTED] wrote:
> >
> > I have not been able to successfully get my usb devices to register and

<snip>
> > My harware is a AMD 1.4 gig cpu on a ASUS a7a266 mobo, 512 meg pc2100 ram,
> > nvidea card, SuSE 7.3 with all SuSE 7.3 updates applied (except the KDE
> > updates released this past week).


_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users

Reply via email to