I picked up a random no-name brand CompactFlash card reader (model
number "CR-V7-UC") towards the end of last year, and this is as far as
I get when I try and use it (2.4.17 kernel) -
hub.c: port 1 connection change
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
hub.c: port 1, portstatus 103, change 0, 12 Mb/s
hub.c: USB new device connect on bus2/1, assigned device number 2
usb.c: kmalloc IF d9ab93a0, numif 1
usb.c: new device strings: Mfr=0, Product=1, SerialNumber=0
usb.c: USB device number 2 default language ID 0x409
Product: USB TO IDE
usb.c: unhandled interfaces on device
usb.c: USB device 2 (vend/prod 0x5e3/0x700) is not claimed by any active driver.
Length = 18
DescriptorType = 01
USB version = 1.10
Vendor:Product = 05e3:0700
MaxPacketSize0 = 8
NumConfigurations = 1
Device version = 1.00
Device Class:SubClass:Protocol = 00:00:00
Per-interface classes
Configuration:
bLength = 9
bDescriptorType = 02
wTotalLength = 0020
bNumInterfaces = 01
bConfigurationValue = 01
iConfiguration = 00
bmAttributes = 80
MaxPower = 96mA
Interface: 0
Alternate Setting: 0
bLength = 9
bDescriptorType = 04
bInterfaceNumber = 00
bAlternateSetting = 00
bNumEndpoints = 02
bInterface Class:SubClass:Protocol = 08:06:50
iInterface = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 81 (in)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
Endpoint:
bLength = 7
bDescriptorType = 05
bEndpointAddress = 02 (out)
bmAttributes = 02 (Bulk)
wMaxPacketSize = 0040
bInterval = 00
usb.c: kusbd: /sbin/hotplug add 2
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
usb-storage: act_altsettting is 0
usb-storage: id_index calculated to be: 72
usb-storage: Array length appears to be: 74
usb-storage: USB Mass Storage device detected
usb-storage: Endpoints: In: 0xdaa9df20 Out: 0xdaa9df34 Int: 0x00000000 (Period 0)
usb-storage: New GUID 05e307000000000000000000
usb-uhci.c: interrupt, status 2, frame# 1742
usb_control/bulk_msg: timeout
usb-storage: GetMaxLUN command result is -110, data is 221
usb-storage: Transport: Bulk
usb-storage: Protocol: Transparent SCSI
usb-storage: *** thread sleeping.
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 ff 00 00 00 45 c3 19 c0
usb-storage: Bulk command S 0x43425355 T 0x1 Trg 0 LUN 0 L 255 F 128 CL 6
usb-storage: Bulk command transfer result=0
usb-storage: usb_stor_transfer_partial(): xfer 255 bytes
usb-storage: usb_stor_bulk_msg() returned -84 xferred 0/255
usb-storage: usb_stor_transfer_partial(): unknown error
usb-storage: Bulk data transfer result 0x2
usb-storage: Attempting to get CSW...
usb-storage: Bulk status result = -84
usb-storage: Bulk reset requested
usb-storage: Bulk soft reset failed -110
usb-storage: -- transport indicates transport failure
usb-storage: Fixing INQUIRY data to show SCSI rev 2
usb-storage: scsi cmd done, result=0x70000
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 ff 00 00 00 45 c3 19 c0
usb-storage: Bulk command S 0x43425355 T 0x2 Trg 0 LUN 0 L 255 F 128 CL 6
usb-storage: Bulk command transfer result=-110
usb-storage: Bulk reset requested
usb-storage: Bulk soft reset failed -110
usb-storage: -- transport indicates transport failure
usb-storage: Fixing INQUIRY data to show SCSI rev 2
usb-storage: scsi cmd done, result=0x70000
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 ff 00 00 00 45 c3 19 c0
usb-storage: Bulk command S 0x43425355 T 0x3 Trg 0 LUN 0 L 255 F 128 CL 6
usb-storage: Bulk command transfer result=-110
usb-storage: Bulk reset requested
usb-storage: Bulk soft reset failed -110
usb-storage: -- transport indicates transport failure
usb-storage: Fixing INQUIRY data to show SCSI rev 2
usb-storage: scsi cmd done, result=0x70000
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (1/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (2/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (3/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (4/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (5/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (6/0)
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Bad target number (7/0)
usb-storage: *** thread sleeping.
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
usb.c: usb-storage driver claimed interface d9ab93a0
USB Mass Storage support registered.
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 18 ret -84
VFS: Disk change detected on device ide1(22,0)
usb-uhci.c: interrupt, status 2, frame# 1666
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 256 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 256 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 9 ret -84
usbdevfs: USBDEVFS_CONTROL failed dev 2 rqt 128 rq 6 len 256 ret -84
At this point I pulled it out...
hub.c: port 1 connection change
hub.c: port 1, portstatus 100, change 3, 12 Mb/s
usb.c: USB disconnect on device 2
usb-storage: storage_disconnect() called
usb-storage: -- releasing main URB
usb-storage: -- usb_unlink_urb() returned -19
usb.c: kusbd: /sbin/hotplug remove 2
...and put a card in the reader, just in case it mattered :
hub.c: port 1 enable change, status 100
hub.c: port 1 connection change
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
hub.c: port 1, portstatus 103, change 0, 12 Mb/s
hub.c: USB new device connect on bus2/1, assigned device number 3
usb.c: kmalloc IF d31b6540, numif 1
usb.c: new device strings: Mfr=0, Product=1, SerialNumber=0
usb.c: USB device number 3 default language ID 0x409
Product: USB TO IDE
usb-storage: act_altsettting is 0
usb-storage: id_index calculated to be: 72
usb-storage: Array length appears to be: 74
usb-storage: USB Mass Storage device detected
usb-storage: Endpoints: In: 0xdaa9df20 Out: 0xdaa9df34 Int: 0x00000000 (Period 0)
usb-storage: Found existing GUID 05e307000000000000000000
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 3
usb.c: usb-storage driver claimed interface d31b6540
usb.c: kusbd: /sbin/hotplug add 3
data from "lsusb" is like so :
Bus 002 Device 005: ID 05e3:0700 Genesys Logic, Inc.
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 Interface
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x05e3 Genesys Logic, Inc.
idProduct 0x0700
bcdDevice 1.00
iManufacturer 0
iProduct 1 USB TO IDE
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 32
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x80
MaxPower 96mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 2
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 64
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x02 EP 2 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 64
bInterval 0
Language IDs: (length=4)
0409 English(US)
...is there anything I can do to help make this work ?
--
Andrew J Cosgriff <[EMAIL PROTECTED]>
starvation alien immunity jets dare
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
