I don't think we should be encouraging people to add the the unusual device list.
On Wed, 6 Mar 2002 [EMAIL PROTECTED] wrote: > I believe the faq and guide need a bit of expansion. I finally stumbled onto what >has to be done regarding many usb-storage devices on the working devices list. >Namely, you probably will have to add an entry to unusual_devs.h in the usb-storage >module code, then recompile and reinstall the module. I had to do this for a USB HD >I unwisely purchased without checking the list. The things that need to be included >in the new entry are the vendor and device id's, the minor and major device revision >numbers [I used 0x0001 and 0xffff - ie every possible one], give names for the driver >to post, then you have to define protocols and flags - that's the hard part since if >you know as little as I do, you have to just empirically figure them out. Look for >examples on the working devices list by searching for working usb-storage devices. >The protocol options are in usb.c, the flag options are in usb.h > > My new entry in the unusual_devs.h: > > UNUSUAL_DEV( 0x05e3, 0x0702, 0x0001, 0xffff, > "Genesys Logic", > "USBDisk", > US_SC_SCSI, US_PR_BULK, NULL, > US_FL_START_STOP | US_FL_MODE_XLATE ), > > Remember YMMV. > > Rich > > _______________________________________________ > [EMAIL PROTECTED] > To unsubscribe, use the last form field at: > https://lists.sourceforge.net/lists/listinfo/linux-usb-users > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | | | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
