I searched , but I can not find linux-2.4.19.tar.gz in some ftp site, the
highest kernel files I can find is linux-2.4.18.tar.gz
, patch-2.4.19-pre4.gz and patch-2.4.19-pre3.gz . I donot know if it is
enough for me to up my kernel
to patch-2.4.19-pre4 using only linux-2.4.18.tar.gz and patch-2.4.19-pre4.gz
. I installed the linux-2.4.18
only, but I got some error output with the reboot of new kernel , In order
to update to 2.4.19-pre4, what files must
I download ?
so I download the newest redhat 7.2 , and its kernel is
2.4.7-10 , the attached file dmesg_rd7.2.txt is the output by redhat 7.2.
the following is part of the dmesg_rh72.txt.
usbaudio: device 4 audiocontrol interface 0 has 1 input and 0 output
AudioStreaming interfaces
usbaudio: valid input sample rate 16000
usbaudio: device 4 interface 1 altsetting 1: format 0x80000010 sratelo 16000
sratehi 16000 attributes 0x00
usbaudio: registered dsp 14,3
usbaudio: constructing mixer for Terminal 3 type 0x0101
usbaudio: unit 2: invalid FEATURE_UNIT descriptor
usbaudio: no mixer controls found for Terminal 3
usb_audio_parsecontrol: usb_audio_state at cd12d720
Linux version 2.4.7-10 ([EMAIL PROTECTED]) (gcc version 2.96
20000731 (Red Hat Linux 7.1 2.96-98)) #1 Thu Sep 6 17:27:27 EDT 2001
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
BIOS-e820: 000000000fff0000 - 000000000fff3000 (ACPI NVS)
BIOS-e820: 000000000fff3000 - 0000000010000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
Scanning bios EBDA for MXT signature
On node 0 totalpages: 65520
zone(0): 4096 pages.
zone(1): 61424 pages.
zone(2): 0 pages.
Kernel command line: ro root=/dev/hda2
Initializing CPU#0
Detected 400.917 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 799.53 BogoMIPS
Memory: 253064k/262080k available (1269k kernel code, 6704k reserved, 90k data, 220k
init, 0k highmem)
Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
Page-cache hash table entries: 65536 (order: 7, 524288 bytes)
CPU: Before vendor init, caps: 0387f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 512K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0387f9ff 00000000 00000000 00000000
CPU serial number disabled.
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Pentium III (Katmai) stepping 03
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfb3a0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Limiting direct PCI/PCI transfers.
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Simple Boot Flag extension found and enabled.
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.14)
mxt_scan_bios: enter
Starting kswapd v1.8
VFS: Diskquotas version dquot_6.5.0 initialized
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ
SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10d
block: queued sectors max/low 168000kB/56000kB, 512 slots per queue
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz PCI bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:DMA
HPT366: onboard version of chipset, pin1=1 pin2=2
HPT366: IDE controller on PCI bus 00 dev 98
PCI: Enabling device 00:13.0 (0005 -> 0007)
HPT366: chipset revision 1
HPT366: not 100% native mode: will probe irqs later
ide2: BM-DMA at 0xd400-0xd407, BIOS settings: hde:pio, hdf:pio
HPT366: IDE controller on PCI bus 00 dev 99
HPT366: chipset revision 1
HPT366: not 100% native mode: will probe irqs later
ide3: BM-DMA at 0xe000-0xe007, BIOS settings: hdg:pio, hdh:pio
hda: IBM-DPTA-372050, ATA DISK drive
hdd: CD-ROM 40X/AKU, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 40088160 sectors (20525 MB) w/1961KiB Cache, CHS=2495/255/63, UDMA(33)
ide-floppy driver 0.97
Partition check:
hda: hda1 hda2 hda3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
ide-floppy driver 0.97
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP: Hash tables configured (established 16384 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 322k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 220k freed
Adding Swap: 1020116k swap-space (priority -1)
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.259 $ time 17:36:49 Sep 6 2001
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xc000, IRQ 5
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.251:USB Universal Host Controller Interface driver
hub.c: USB new device connect on bus1/2, assigned device number 2
usb_control/bulk_msg: timeout
usb.c: USB device not accepting new address=2 (error=-110)
hub.c: USB new device connect on bus1/2, assigned device number 3
EXT3 FS 2.4-0.9.8, 25 Aug 2001 on ide0(3,2), internal journal
usb_control/bulk_msg: timeout
usb.c: USB device not accepting new address=3 (error=-110)
parport0: PC-style at 0x378 [PCSPP,TRISTATE]
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
parport0: cpp_daisy: aa5500ff(38)
parport0: assign_addrs: aa5500ff(38)
ip_conntrack (2047 buckets, 16376 max)
via-rhine.c:v1.10-LK1.1.10 07/12/2001 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
eth0: VIA VT3043 Rhine at 0xc400, 00:90:99:16:52:5e, IRQ 5.
eth0: MII PHY found at address 8, status 0x782d advertising 05e1 Link 45e1.
eth0: Setting full-duplex based on MII #8 link partner capability of 45e1.
hub.c: USB new device connect on bus1/2, assigned device number 4
usb.c: USB device 4 (vend/prod 0x471/0x0) is not claimed by any active driver.
usb_control/bulk_msg: timeout
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6 len 18 ret -110
usb_control/bulk_msg: timeout
usbdevfs: USBDEVFS_CONTROL failed dev 4 rqt 128 rq 6 len 18 ret -110
usb.c: registered new driver audio
usbaudio: device 4 audiocontrol interface 0 has 1 input and 0 output AudioStreaming
interfaces
usbaudio: valid input sample rate 16000
usbaudio: device 4 interface 1 altsetting 1: format 0x80000010 sratelo 16000 sratehi
16000 attributes 0x00
usbaudio: registered dsp 14,3
usbaudio: constructing mixer for Terminal 3 type 0x0101
usbaudio: unit 2: invalid FEATURE_UNIT descriptor
usbaudio: no mixer controls found for Terminal 3
usb_audio_parsecontrol: usb_audio_state at cd12d720
audio.c: v1.0.0:USB Audio Class driver
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 203M
agpgart: Detected Intel 440BX chipset
agpgart: AGP aperture is 64M @ 0xd8000000
[drm] AGP 0.99 on Intel 440BX @ 0xd8000000 64MB
[drm] Initialized mga 3.0.2 20010321 on minor 0
agpgart: AGP mode is 1x
es1371: version v0.30 time 17:36:47 Sep 6 2001
es1371: found chip, vendor id 0x1274 device id 0x5880 revision 0x02
es1371: found es1371 rev 2 at io 0xc800 irq 10
es1371: features: joystick 0x0
ac97_codec: AC97 Audio codec, id: 0x8384:0x7608 (SigmaTel STAC9708)
ide-floppy driver 0.97
hdd: ATAPI 40X CD-ROM drive, 128kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
cdrom: This disc doesn't have any tracks I recognize!
usb.c: USB disconnect on device 4
usbaudio: unregister dsp 14,3
hub.c: USB new device connect on bus1/1, assigned device number 5
usbaudio: device 5 audiocontrol interface 0 has 1 input and 0 output AudioStreaming
interfaces
usbaudio: valid input sample rate 16000
usbaudio: device 5 interface 1 altsetting 1: format 0x80000010 sratelo 16000 sratehi
16000 attributes 0x00
usbaudio: registered dsp 14,3
usbaudio: constructing mixer for Terminal 3 type 0x0101
usbaudio: unit 2: invalid FEATURE_UNIT descriptor
usbaudio: no mixer controls found for Terminal 3
usb_audio_parsecontrol: usb_audio_state at cd12d5e0
