Hello,
I have two Linksys WUSB11 v2.5 devices. Both are running in AdHoc Mode.
I am using linux-wlan-ng-0.1.13-pre4, on Slackware 8, with the 2.4.18
kernel. When one device is on one of my Linux boxes, and another is on
a Windows XP box (both running in AdHoc mode), it works fine.
I built another Linux box, and attempted to run the new machine and
device in AdHoc mode. Apparently, this does not work at all. See the
following `dmesg` output. This occurs when I try to ping the other
host. Obviously, the modules load on this new box, and I can see the
wlan0 device with a valid MAC, and I can `ifconfig` the interface.
Q. Are the following USB interface errors, or WUSB11 driver errors?
Q. Any idea of what may be causing this, or what the error means?
init_module: prism2_usb.o: 0.1.13-pre3 Loaded
init_module: dev_info is: prism2_usb
usb.c: registered new driver prism2_usb
prism2_usb: Attempting to claim device Linksys WUSB11v2.5 11Mbps WLAN
USB Adapter with devnum 2
ident: nic h/w: id=0x8010 1.0.0
ident: pri f/w: id=0x15 1.0.6
ident: sta f/w: id=0x1f 1.3.4 MFI:SUP:role=0x00:id=0x01:var=0x01:b/t=1/1
CFI:SUP:role=0x00:id=0x02:var=0x02:b/t=1/1
PRI:SUP:role=0x00:id=0x03:var=0x01:b/t=1/3
STA:SUP:role=0x00:id=0x04:var=0x01:b/t=1/9
PRI-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-CFI:ACT:role=0x01:id=0x02:var=0x02:b/t=1/1
STA-MFI:ACT:role=0x01:id=0x01:var=0x01:b/t=1/1
Prism2 card SN: 01190003\x00\x00\x00\x00
hfa384x_dorrid: hfa384x_dorrid:ctlx failure=REQ_TIMEOUT
hfa384x_usbctlxq_run: hfa384x_usbctlxq_run:Fatal, failed to submit
command urb. error=-12
hfa384x_dorrid: hfa384x_dorrid:ctlx failure=REQSUBMIT_FAIL
hfa384x_drvr_txframe: hfa384x_drvr_txframe: submit_urb() failed,
result=-12
Regards,
Todd E. Johnson
[EMAIL PROTECTED]
_________________________________________________________
Do You Yahoo!?
Get your free @yahoo.com address at http://mail.yahoo.com
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
