On Sun, 2002-03-31 at 19:01, Brad Hards wrote:
> On Mon, 1 Apr 2002 10:00, RR wrote:
> > On Sun, 2002-03-31 at 18:56, Brad Hards wrote:
> > > On Mon, 1 Apr 2002 09:54, RR wrote:
> > > <snip>
> > >
> > > > landie@pepino:~ > cat /proc/bus/usb/drivers
> > > > usbdevfs
> > > > hub
> > > > 96-111: hiddev
> > > > hid
> > > > usbnet
> > >
> > > Wrong driver. "usbdnet".
> > > Or "CDCEther", with patches.
> >
> > root@pepino:/home/landie > lsmod | grep usb
> > usbdnet 13096 0 (unused)
> > usbnet 7304 0 (unused)
> > usb-uhci 20996 0 (unused)
> > usbcore 47616 1 [usbdnet usbnet hid usb-uhci]
> > root@pepino:/home/landie >
> So now provide the information:
>
> /proc/busb/usb/devices
> usbdevfs
hub
96-111: hiddev
hid
usbnet
usbdnet
> dmesg output [without editing, if possible]
620k reserved, 382k data, 112k init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
Buffer-cache hash table entries: 8192 (order: 3, 32768 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: Before vendor init, caps: 0383fbff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After vendor init, caps: 0383fbff 00000000 00000000 00000000
CPU: After generic, caps: 0383fbff 00000000 00000000 00000000
CPU: Common caps: 0383fbff 00000000 00000000 00000000
CPU: Intel Pentium III (Coppermine) stepping 06
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([EMAIL PROTECTED])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xe8316, last bus=2
PCI: Using configuration type 1
PCI: Probing PCI hardware
Unknown bridge resource 0: assuming transparent
Unknown bridge resource 2: assuming transparent
PCI: Using IRQ router default [8086/2410] at 00:1f.0
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.15)
Starting kswapd
VFS: Diskquotas version dquot_6.5.0 initialized
vesafb: framebuffer at 0x44000000, mapped to 0xc880d000, size 32768k
vesafb: mode is 800x600x8, linelength=800, pages=7
vesafb: protected mode interface info at c000:0336
vesafb: scrolling: redraw
Console: switching to colour frame buffer device 100x37
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ
SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10e
block: 128 slots per queue, batch=32
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev f9
PIIX4: chipset revision 2
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x2460-0x2467, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x2468-0x246f, BIOS settings: hdc:DMA, hdd:DMA
hda: IC35L040AVER07-0, ATA DISK drive
hdc: PLEXTOR CD-R PX-W4012A, ATAPI CD/DVD-ROM drive
hdd: COMPAQ DVD-ROM SD-612B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
blk: queue c02f6900, I/O limit 4095Mb (mask 0xffffffff)
hda: 80418240 sectors (41174 MB) w/1916KiB Cache, CHS=5318/240/63, UDMA(66)
hdd: ATAPI 32X DVD-ROM drive, 512kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
ide-floppy driver 0.97.sv
Partition check:
hda: hda1 hda2 hda3
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
loop: loaded (max 8 devices)
Cronyx Ltd, Synchronous PPP and CISCO HDLC (c) 1994
Linux port (c) 1998 Building Number Three Ltd & Jan "Yenya" Kasprzak.
ide-floppy driver 0.97.sv
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
request_module[scsi_hostadapter]: Root fs not mounted
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 1024 buckets, 8Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Uncompressing................................done.
Freeing initrd memory: 442k freed
VFS: Mounted root (ext2 filesystem).
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: PLEXTOR Model: CD-R PX-W4012A Rev: 1.00
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=2
Trying to unmount old root ... okay
Freeing unused kernel memory: 112k freed
Adding Swap: 264592k swap-space (priority 42)
ip_conntrack (1024 buckets, 8192 max)
Linux Tulip driver version 0.9.15-pre9 (Nov 6, 2001)
eth0: ADMtek Comet rev 17 at 0x1000, 00:03:6D:1B:80:53, IRQ 5.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.268 $ time 22:55:58 Mar 30 2002
usb-uhci.c: High bandwidth mode enabled
PCI: Setting latency timer of device 00:1f.2 to 64
usb-uhci.c: USB UHCI at I/O 0x2440, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.268:USB Universal Host Controller Interface driver
hub.c: USB new device connect on bus1/1, assigned device number 2
usb.c: USB device 2 (vend/prod 0x4dd/0x8004) is not claimed by any active driver.
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
eth0: no IPv6 routers present
usb.c: registered new driver usbnet
usb.c: USB disconnect on device 2
hub.c: USB new device connect on bus1/1, assigned device number 3
usb-uhci.c: interrupt, status 2, frame# 313
usb.c: USB device not accepting new address=3 (error=-110)
hub.c: USB new device connect on bus1/1, assigned device number 4
usb.c: USB device not accepting new address=4 (error=-110)
hub.c: USB new device connect on bus1/1, assigned device number 5
usb.c: USB device 5 (vend/prod 0x4dd/0x8004) is not claimed by any active driver.
usb.c: USB disconnect on device 5
hub.c: USB new device connect on bus1/1, assigned device number 6
usb-uhci.c: interrupt, status 3, frame# 356
usb_control/bulk_msg: timeout
usb.c: USB device 6 (vend/prod 0x4dd/0x8004) is not claimed by any active driver.
usb.c: USB disconnect on device 6
hub.c: USB new device connect on bus1/1, assigned device number 7
usb.c: USB device 7 (vend/prod 0x4dd/0x8004) is not claimed by any active driver.
usb.c: USB disconnect on device 7
hub.c: USB new device connect on bus1/1, assigned device number 8
usb.c: USB device 8 (vend/prod 0x4dd/0x8004) is not claimed by any active driver.
usb.c: USB disconnect on device 8
hub.c: USB new device connect on bus1/1, assigned device number 9
usb.c: USB device 9 (vend/prod 0x4dd/0x8004) is not claimed by any active driver.
usb.c: deregistering driver usbnet
usb.c: USB disconnect on device 9
hub.c: USB new device connect on bus1/1, assigned device number 10
usb-uhci.c: interrupt, status 2, frame# 272
usb.c: USB device not accepting new address=10 (error=-110)
hub.c: USB new device connect on bus1/1, assigned device number 11
usb.c: USB device 11 (vend/prod 0x4dd/0x8004) is not claimed by any active driver.
usb.c: USB disconnect on device 11
hub.c: USB new device connect on bus1/1, assigned device number 12
usb.c: USB device 12 (vend/prod 0x4dd/0x8004) is not claimed by any active driver.
usb.c: registered new driver usbnet
usb.c: USB disconnect on device 12
hub.c: USB new device connect on bus1/1, assigned device number 13
usb-uhci.c: interrupt, status 3, frame# 1604
usb_control/bulk_msg: timeout
usb.c: USB device 13 (vend/prod 0x4dd/0x8004) is not claimed by any active driver.
usb.c: USB disconnect on device 13
hub.c: USB new device connect on bus1/1, assigned device number 14
usb.c: USB device 14 (vend/prod 0x4dd/0x8004) is not claimed by any active driver.
usb.c: USB disconnect on device 14
hub.c: USB new device connect on bus1/1, assigned device number 15
usb-uhci.c: interrupt, status 3, frame# 613
usb_control/bulk_msg: timeout
usb.c: USB device 15 (vend/prod 0x4dd/0x8004) is not claimed by any active driver.
usb.c: USB disconnect on device 15
hub.c: USB new device connect on bus1/1, assigned device number 16
usb.c: USB device 16 (vend/prod 0x4dd/0x8004) is not claimed by any active driver.
v0.4b [EMAIL PROTECTED], [EMAIL PROTECTED]
usbdnet.c: v0.4b [EMAIL PROTECTED], [EMAIL PROTECTED]
usbdnet.c: USB Host to Device Network - for Linux USB Devices using MDLM/CDC
usb.c: registered new driver usbdnet
usbdnet: probe
probe: -> idVendor: 04dd idProduct: 8004 InterfaceClass 02 InterfaceSubclass: 06
idp_search[0]: idVendor: 049f idProduct: ffff bDeviceClass 02 bInterfaceClass: 02
bInterfaceSubclass: 06
idp_search[0]: idVendor: 03f0 idProduct: 2101 bDeviceClass 02 bInterfaceClass: 02
bInterfaceSubclass: 06
idp_search[0]: idVendor: 04dd idProduct: 8001 bDeviceClass 02 bInterfaceClass: 02
bInterfaceSubclass: 06
idp_search[0]: idVendor: 04dd idProduct: 8002 bDeviceClass 02 bInterfaceClass: 02
bInterfaceSubclass: 06
idp_search[0]: idVendor: 04dd idProduct: 8004 bDeviceClass 02 bInterfaceClass: 02
bInterfaceSubclass: 06
idp_search[0]: MATCH
interface_search[0:0:0]: bInterfaceClass: 2:2 bNumEndpoints: 0:0
interface_search[0:0:0]: OK
interface_search[0:0:0]: bInterfaceClass: 10:2 bNumEndpoints: 2:0
interface_search[0:1:0]: bInterfaceClass: 10:10 bNumEndpoints: 2:0
interface_search[0:1:1]: bInterfaceClass: 10:10 bNumEndpoints: 2:2
interface_search[0:1:1]: OK
probe[0]: CDC Device cdc_interface: c292d2e0 data_interface c292d378
usbdnet: CRC
probe[0:0]: endpoint bmAttributes: 02 address: 01
probe[0:0]: tx ep
probe[0:1]: endpoint bmAttributes: 02 address: 82
probe[0:1]: rx ep
probe[0]: FOUND MATCH data_interface: c292d378
cdc_interface: c292d2e0 mdlm_interface: 00000000 data_interface: c292d378 tx_ep:
c19e8ba0 rx_ep: c19e8bb4
probe[0]: setting configuration 1
probe[0]: claiming interface(s)
probe[0]: setting interface 1 alternate: 1
probe[0]: rx_size: 64 tx_size: 64
probe[0]: rx_ep : 82 tx_ep : 1
probe[0]: success v0.4b
usb.c: USB disconnect on device 16
hub.c: USB new device connect on bus1/1, assigned device number 17
usbdnet: probe
probe: -> idVendor: 04dd idProduct: 8004 InterfaceClass 02 InterfaceSubclass: 06
idp_search[0]: idVendor: 049f idProduct: ffff bDeviceClass 02 bInterfaceClass: 02
bInterfaceSubclass: 06
idp_search[0]: idVendor: 03f0 idProduct: 2101 bDeviceClass 02 bInterfaceClass: 02
bInterfaceSubclass: 06
idp_search[0]: idVendor: 04dd idProduct: 8001 bDeviceClass 02 bInterfaceClass: 02
bInterfaceSubclass: 06
idp_search[0]: idVendor: 04dd idProduct: 8002 bDeviceClass 02 bInterfaceClass: 02
bInterfaceSubclass: 06
idp_search[0]: idVendor: 04dd idProduct: 8004 bDeviceClass 02 bInterfaceClass: 02
bInterfaceSubclass: 06
idp_search[0]: MATCH
interface_search[0:0:0]: bInterfaceClass: 2:2 bNumEndpoints: 0:0
interface_search[0:0:0]: OK
interface_search[0:0:0]: bInterfaceClass: 10:2 bNumEndpoints: 2:0
interface_search[0:1:0]: bInterfaceClass: 10:10 bNumEndpoints: 2:0
interface_search[0:1:1]: bInterfaceClass: 10:10 bNumEndpoints: 2:2
interface_search[0:1:1]: OK
probe[0]: CDC Device cdc_interface: c292d360 data_interface c292d2f8
usbdnet: CRC
probe[0:0]: endpoint bmAttributes: 02 address: 01
probe[0:0]: tx ep
probe[0:1]: endpoint bmAttributes: 02 address: 82
probe[0:1]: rx ep
probe[0]: FOUND MATCH data_interface: c292d2f8
cdc_interface: c292d360 mdlm_interface: 00000000 data_interface: c292d2f8 tx_ep:
c19e8ae0 rx_ep: c19e8af4
probe[0]: setting configuration 1
probe[0]: claiming interface(s)
probe[0]: setting interface 1 alternate: 1
probe[0]: rx_size: 64 tx_size: 64
probe[0]: rx_ep : 82 tx_ep : 1
probe[0]: success v0.4b
usb0: no IPv6 routers present
bh_rx_process: CRC fail len: 100
bh_rx_process: CRC fail len: 100
bh_rx_process: CRC fail len: 100
usb-uhci.c: process_transfer: fixed toggle
bh_rx_process: CRC fail len: 42
usb-uhci.c: process_transfer: fixed toggle
bh_rx_process: CRC fail len: 42
usb-uhci.c: process_transfer: fixed toggle
bh_rx_process: CRC fail len: 42
usb-uhci.c: process_transfer: fixed toggle
bh_rx_process: CRC fail len: 42
usb-uhci.c: process_transfer: fixed toggle
bh_rx_process: CRC fail len: 42
usb-uhci.c: process_transfer: fixed toggle
bh_rx_process: CRC fail len: 42
usb-uhci.c: process_transfer: fixed toggle
bh_rx_process: CRC fail len: 42
usb-uhci.c: process_transfer: fixed toggle
bh_rx_process: CRC fail len: 42
usb-uhci.c: process_transfer: fixed toggle
bh_rx_process: CRC fail len: 42
usb-uhci.c: process_transfer: fixed toggle
bh_rx_process: CRC fail len: 42
usb-uhci.c: process_transfer: fixed toggle
bh_rx_process: CRC fail len: 42
usb-uhci.c: process_transfer: fixed toggle
bh_rx_process: CRC fail len: 42
usb-uhci.c: process_transfer: fixed toggle
bh_rx_process: CRC fail len: 42
usb-uhci.c: process_transfer: fixed toggle
bh_rx_process: CRC fail len: 42
usb-uhci.c: interrupt, status 2, frame# 1074
usb-uhci.c: process_transfer: fixed toggle
usb-uhci.c: process_transfer: fixed toggle
usb-uhci.c: process_transfer: fixed toggle
usb-uhci.c: process_transfer: fixed toggle
usb.c: USB disconnect on device 17
hub.c: USB new device connect on bus1/1, assigned device number 18
usbdnet: probe
probe: -> idVendor: 04dd idProduct: 8004 InterfaceClass 02 InterfaceSubclass: 06
idp_search[0]: idVendor: 049f idProduct: ffff bDeviceClass 02 bInterfaceClass: 02
bInterfaceSubclass: 06
idp_search[0]: idVendor: 03f0 idProduct: 2101 bDeviceClass 02 bInterfaceClass: 02
bInterfaceSubclass: 06
idp_search[0]: idVendor: 04dd idProduct: 8001 bDeviceClass 02 bInterfaceClass: 02
bInterfaceSubclass: 06
idp_search[0]: idVendor: 04dd idProduct: 8002 bDeviceClass 02 bInterfaceClass: 02
bInterfaceSubclass: 06
idp_search[0]: idVendor: 04dd idProduct: 8004 bDeviceClass 02 bInterfaceClass: 02
bInterfaceSubclass: 06
idp_search[0]: MATCH
interface_search[0:0:0]: bInterfaceClass: 2:2 bNumEndpoints: 0:0
interface_search[0:0:0]: OK
interface_search[0:0:0]: bInterfaceClass: 10:2 bNumEndpoints: 2:0
interface_search[0:1:0]: bInterfaceClass: 10:10 bNumEndpoints: 2:0
interface_search[0:1:1]: bInterfaceClass: 10:10 bNumEndpoints: 2:2
interface_search[0:1:1]: OK
probe[0]: CDC Device cdc_interface: c292d360 data_interface c292d278
usbdnet: CRC
probe[0:0]: endpoint bmAttributes: 02 address: 01
probe[0:0]: tx ep
probe[0:1]: endpoint bmAttributes: 02 address: 82
probe[0:1]: rx ep
probe[0]: FOUND MATCH data_interface: c292d278
cdc_interface: c292d360 mdlm_interface: 00000000 data_interface: c292d278 tx_ep:
c19e8b60 rx_ep: c19e8b74
probe[0]: setting configuration 1
probe[0]: claiming interface(s)
probe[0]: setting interface 1 alternate: 1
probe[0]: rx_size: 64 tx_size: 64
probe[0]: rx_ep : 82 tx_ep : 1
probe[0]: success v0.4b
usb-uhci.c: interrupt, status 2, frame# 739
usb-uhci.c: process_transfer: fixed toggle
usb-uhci.c: process_transfer: fixed toggle
usb-uhci.c: process_transfer: fixed toggle
usb-uhci.c: process_transfer: fixed toggle
urb_tx_complete: urb: c287b860 status: -110
usbdnet: bh skb: c782ca80 status: -110
urb_tx_complete: urb: c287b860 status: -110
usbdnet: bh skb: c5f22b60 status: -110
usb-uhci.c: interrupt, status 2, frame# 443
urb_tx_complete: urb: c287b860 status: -110
usbdnet: bh skb: c5f22b60 status: -110
urb_tx_complete: urb: c287b860 status: -110
usbdnet: bh skb: c782ce40 status: -110
usb0: no IPv6 routers present
> ifconfig -a
>
>
>
root@pepino:/home/landie > ifconfig -a
eth0 Link encap:Ethernet HWaddr 00:03:6D:1B:80:53
inet addr:192.168.1.100 Bcast:192.168.1.255
Mask:255.255.255.0
inet6 addr: fe80::203:6dff:fe1b:8053/10 Scope:Link
UP BROADCAST NOTRAILERS RUNNING MTU:1500 Metric:1
RX packets:22249 errors:0 dropped:0 overruns:0 frame:0
TX packets:17246 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:23884007 (22.7 Mb) TX bytes:1522683 (1.4 Mb)
Interrupt:5 Base address:0x1000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1202 errors:0 dropped:0 overruns:0 frame:0
TX packets:1202 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:301481 (294.4 Kb) TX bytes:301481 (294.4 Kb)
sit0 Link encap:IPv6-in-IPv4
NOARP MTU:1480 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
usb0 Link encap:Ethernet HWaddr 40:00:00:00:FF:12
inet addr:192.168.129.200 Bcast:192.168.129.255
Mask:255.255.255.0
inet6 addr: fe80::4200:ff:fe00:ff12/10 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:5 overruns:0 frame:0
TX packets:0 errors:4 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
i am able to ping the device but i cant ping out from the device
i tried using auto ip since i have a router
trying to specify the ip,,what should the gateway be on the pda
>
>
>
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
