On Mon, 2002-04-15 at 21:43, Dmitri wrote: > > Attached is my /proc/bus/usb/devices and the output of lsusb when the > > camera is connected. If you need more info, please tell me. > > The camera is NOT connected - either the cable is bad, or you are > connecting the cable to an unused connector. > ugh! Thought something was detected, since a new file appears in /proc/bus/usb/00x/ any time I connect the camera (don't know what this means though :-), and the output of lsusb seems to show something different (AIPTEK...) when the camera is 'connected'.
> The output below only shows two OHCI controllers, and no devices > attached to either of them. > > There is no point in trying drivers until the hardware connection is > established. You are not there yet. > ok, so /var/log/syslog shows: Apr 15 21:48:44 zubiri kernel: hub.c: USB new device connect on bus1/1, assigned device number 5 Apr 15 21:48:44 zubiri kernel: usb.c: USB device not accepting new address=5 (error=-110) Apr 15 21:48:44 zubiri kernel: hub.c: USB new device connect on bus1/1, assigned device number 6 Apr 15 21:48:44 zubiri kernel: usb.c: USB device not accepting new address=6 (error=-110) Apr 15 21:48:45 zubiri kernel: hub.c: USB new device connect on bus1/1, assigned device number 7 Apr 15 21:48:45 zubiri kernel: usb.c: USB device 7 (vend/prod 0x8ca/0x101) is not claimed by any active driver. any hint here? cheers -- Rodrigo Moya <[EMAIL PROTECTED]> - <[EMAIL PROTECTED]> http://www.gnome-db.org/ - http://www.ximian.com/ _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
