Hi Richard,
If you need a driver for windows it is unlikely to be an ACM
device.
regards,
Stephen.
On Fri, 19 Apr 2002, Richard Wayne wrote:
>
>
>
> > Hello,
> >
> > I have two wireless mobile phones which act like USB modem. After plug
> them in the Redhat 7.2 system, one of them is claimed by the ACM driver. I
> can send AT command to it.
> >
> > The other one (ProdID=3197) has Cls=ff(vend.). So, it is not claimed by
> any driver. However, when used with the vendor's Windows 2000 driver on the
> windows PC, I can send AT command to it with a Hyper terminal.
> >
> > Therefore, I'd like to force the ProdID=3197 device to use ACM driver as
> well. Any one can point me how to do it?
> >
> > The /proc/bus/usb/device contects is attached
> >
> >
> > Thanks,
> >
> > Simon
> >
> >
> > T: Bus=01 Lev=02 Prnt=02 Port=02 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
> > D: Ver= 1.01 Cls=02(comm.) Sub=00 Prot=00 MxPS=16 #Cfgs= 1
> > P: Vendor=05c6 ProdID=3100 Rev= 0.00
> > S: Manufacturer=Qualcomm, Incorporated
> > S: Product=Qualcomm CDMA Technologies MSM
> > S: SerialNumber=Serial Number
> > C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> > I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=02 Prot=01 Driver=acm
> > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl= 32ms
> > I: If#= 1 Alt= 0 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=acm
> > E: Ad=8a(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> > E: Ad=0b(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> >
> > T: Bus=01 Lev=02 Prnt=02 Port=03 Cnt=03 Dev#= 5 Spd=12 MxCh= 0
> > D: Ver= 1.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs= 1
> > P: Vendor=05c6 ProdID=3197 Rev= 0.00
> > S: Manufacturer=Qualcomm, Incorporated
> > S: Product=Qualcomm CDMA Technologies MSM
> > S: SerialNumber=Serial Number
> > C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> > I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> > E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
> > E: Ad=8a(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> > E: Ad=0b(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> > I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> > E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> > E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
> >
> >
>
> _______________________________________________
> [EMAIL PROTECTED]
> To unsubscribe, use the last form field at:
> https://lists.sourceforge.net/lists/listinfo/linux-usb-users
>
--
/------------------------------------+-------------------------\
|Stephen J. Gowdy | SLAC, MailStop 34, |
|http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, |
|http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA |
|EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 |
\------------------------------------+-------------------------/
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
