I am starting with usb, and I want my snapscan 1212u scanner to work
When I use the following commands I get the following answers:
#cat /proc/bus/usb/devices
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc=700/900 us (78%), #Int= 0, #Iso= 20
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=e000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1
P: Vendor=0915 ProdID=8000 Rev= 1.00
S: Manufacturer=GlobeSpan Inc.
S: Product=USB-ADSL Modem
S: SerialNumber=FFFFFF
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbdevfs
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl= 3ms
I: If#= 0 Alt= 1 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbdevfs
E: Ad=88(I) Atr=01(Isoc) MxPS=1008 Ivl= 1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl= 3ms
I: If#= 0 Alt= 2 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbdevfs
E: Ad=88(I) Atr=01(Isoc) MxPS= 912 Ivl= 1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl= 3ms
I: If#= 0 Alt= 3 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbdevfs
E: Ad=88(I) Atr=01(Isoc) MxPS= 736 Ivl= 1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl= 3ms
I: If#= 0 Alt= 4 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbdevfs
E: Ad=88(I) Atr=01(Isoc) MxPS= 448 Ivl= 1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl= 3ms
I: If#= 0 Alt= 5 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbdevfs
E: Ad=88(I) Atr=01(Isoc) MxPS= 240 Ivl= 1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl= 3ms
I: If#= 0 Alt= 6 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=usbdevfs
E: Ad=88(I) Atr=01(Isoc) MxPS= 96 Ivl= 1ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl= 3ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS= 8 #Cfgs= 1
P: Vendor=06bd ProdID=2061 Rev= 1.00
S: Manufacturer=AGFA
S: Product=SNAPSCAN
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 8 Ivl= 0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl= 16ms
#cat /proc/bus/usb/drivers
usbdevfs
hub
I suppose that my device is detected because of the Snapscan thing:
but when I try to start sane or xsane it tells me that the device
/dev/usbscanner cannot be found.
It also tells me this when i try to load the firmware (What is it?)
Can anyboy help me because I am trying to make it work since a week and I
can't get anything.
PS Notice that I am using Redhat 7.2 and usb is already working because I use
an usb modem to connect to the internet
Thanks in advance
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Stuff, things, and much much more.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
