Hi
This is my lspci -v
0:00.0 Host bridge: Intel Corporation 440GX - 82443GX
Host bridge
Flags: bus master, medium devsel, latency 64
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
00:01.0 PCI bridge: Intel Corporation 440GX - 82443GX
AGP bridge (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01,
sec-latency=64
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: ff500000-ff5fffff
Prefetchable memory behind bridge: eea00000-f6afffff
00:07.0 ISA bridge: Intel Corporation 82371AB PIIX4
ISA (rev 02)
Flags: bus master, medium devsel, latency 0
00:07.1 IDE interface: Intel Corporation 82371AB PIIX4
IDE (rev 01) (prog-if 80 [Master])
Flags: bus master, medium devsel, latency 64
I/O ports at ffa0 [size=16]
00:07.2 USB Controller: Intel Corporation 82371AB
PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Flags: bus master, medium devsel, latency 64, IRQ 10
I/O ports at ef80 [size=32]
00:07.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI
(rev 02)
Flags: medium devsel, IRQ 9
00:0f.0 Ethernet controller: Intel Corporation 82557
[Ethernet Pro 100] (rev 08) Subsystem: Intel
Corporation EtherExpress PRO/100+ Management Adapter
Flags: bus master, medium devsel, latency 64, IRQ 9
Memory at ffaff000 (32-bit, non-prefetchable)
[size=4K]
I/O ports at ef00 [size=64]
Memory at ff900000 (32-bit, non-prefetchable)
[size=1M]
Expansion ROM at ff800000 [disabled] [size=1M]
Capabilities: [dc] Power Management version 2
00:10.0 USB Controller: NEC Corporation USB (rev 41)
(prog-if 10 [OHCI])
Subsystem: Adaptec: Unknown device 0035
Flags: bus master, medium devsel, latency 40, IRQ 11
Memory at ffafc000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: [40] Power Management version 2
00:10.1 USB Controller: NEC Corporation USB (rev 41)
(prog-if 10 [OHCI])
Subsystem: Adaptec: Unknown device 0035
Flags: bus master, medium devsel, latency 40, IRQ 5
Memory at ffafd000 (32-bit, non-prefetchable)
[size=4K]
Capabilities: [40] Power Management version 2
00:10.2 USB Controller: NEC Corporation: Unknown
device 00e0 (rev 02) (prog-if 20)
Subsystem: Adaptec: Unknown device 00e0
Flags: bus master, medium devsel, latency 32, IRQ 10
Memory at ffafef00 (32-bit, non-prefetchable)
[size=256]
Capabilities: [40] Power Management version 2
00:12.0 Multimedia audio controller: Ensoniq CT5880
[AudioPCI] (rev 02)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI128
Flags: bus master, slow devsel, latency 64, IRQ 5
I/O ports at ee80 [size=64]
Capabilities: [dc] Power Management version 1
01:00.0 VGA compatible controller: ATI Technologies
Inc Rage 128 RF (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc: Unknown device 0008
Flags: bus master, stepping, 66Mhz, medium devsel,
latency 64, IRQ 11
Memory at f0000000 (32-bit, prefetchable) [size=64M]
I/O ports at d800 [size=256]
Memory at ff5fc000 (32-bit, non-prefetchable)
[size=16K]
Expansion ROM at ff5c0000 [disabled] [size=128K]
Capabilities: [50] AGP version 2.0
Capabilities: [5c] Power Management version 1
##########################################
cat /proc/bus/usb/devices
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1
Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8
#Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.05
S: Manufacturer=Linux 2.5.24 usb-uhci-hcd
S: Product=Intel Corp. 82371AB PIIX4 USB
S: SerialNumber=00:07.2
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00
Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1
Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8
#Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.05
S: Manufacturer=Linux 2.5.24 ohci-hcd
S: Product=NEC Corporation USB (#2)
S: SerialNumber=00:10.1
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00
Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1
Spd=12 MxCh= 3
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8
#Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.05
S: Manufacturer=Linux 2.5.24 ohci-hcd
S: Product=NEC Corporation USB
S: SerialNumber=00:10.0
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00
Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2
Spd=1.5 MxCh= 0
D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8
#Cfgs= 1
P: Vendor=0461 ProdID=4d09 Rev= 0.10
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 40mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02
Driver=hid
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl=10ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1
Spd=480 MxCh= 5
B: Alloc= 0/800 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 2.00 Cls=09(hub ) Sub=00 Prot=01 MxPS= 8
#Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.05
S: Manufacturer=Linux 2.5.24 ehci-hcd
S: Product=NEC Corporation USB 2.0
S: SerialNumber=00:10.2
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00
Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
###########################################
cat /proc/bus/usb/drivers
usbfs
hub
hid
############################################
/sbin/lsmod
Module Size Used by
mousedev 4624 0 (unused)
input 9248 0 [mousedev]
hid 11392 0 (unused)
usb-uhci-hcd 20432 0 (unused)
ohci-hcd 23216 0 (unused)
ehci-hcd 26640 0 (unused)
usbcore 75584 1 [hid usb-uhci-hcd
ohci-hcd ehci-hcd]
########################
Some how my mouse got detected while booting (after
several trial and error combinations) but USB mouse
doesn't work. Only ps/2 mouse works.
If i unplug ps/2 mouse and try to run mouseconfig
it says error in reading line 5 in
/etc/sysconfig/mouse
and line 5 is DEVICE=/dev/mouse
Please help
Shino
--- "Stephen J. Gowdy" <[EMAIL PROTECTED]>
wrote:
> You should send the output of your log files to the
> list. Together with
> lspci -v, cat /proc/bus/usb/devices and drivers,
> lsmod and other stuff
> requested in the FAQ.
>
> On Thu, 11 Jul 2002, shino korah wrote:
>
> >
> > --- "Stephen J. Gowdy" <[EMAIL PROTECTED]>
> > wrote:
> > > What is "all modules"? Do you have ohci-hcd (or
> an
> > > other OHCI driver)
> > > loaded?
> >
> > I ahve all usb/host modules loaded properly.
> meaning
> > ehci-hcd, ohci-hcd,usbcore etc.
> >
> > What do you log files tell you? What makes
> > > you think it doesn't
> > > work?
> >
> > I plugged in my usb mouse to my new pci card (NEC
> USB
> > 2.0)I was expecting the system to detect that and
> load
> > the correct drivers (hid and mousedev). But it
> doesn't
> > detect it.
> >
> > I deleted the /etc/sysconfig/mouse file and did
> > xconfiguartor so that it will probe for mouse.
> taht
> > also failed to detect teh mouse. If i plug n my
> ps/2
> > mouse everything is ok.
> >
> >
> > >
> > > On Thu, 11 Jul 2002, shino korah wrote:
> > >
> > > > Hi
> > > >
> > > > I have kernel 2.5.24 and all USB drivers
> loads
> > > > correct. But when I plug in my USB mouse it
> > > doesn't
> > > > detect it.I have NEC USB 2.0 PCI card and I
> > > plugged in
> > > > my mouse to this card.I have all modules in
> place
> > > > mousedev, hid etc.But some how the ssytem is
> not
> > > > recognising my USB mouse.
> > > >
> > > > Please help
> > > >
> > > > shino
> > > >
> > > >
> __________________________________________________
> > > > Do You Yahoo!?
> > > > Sign up for SBC Yahoo! Dial - First Month Free
> > > > http://sbc.yahoo.com
> > > >
> > > >
> > > >
> > >
> >
>
-------------------------------------------------------
> > > > This sf.net email is sponsored by:ThinkGeek
> > > > PC Mods, Computing goodies, cases & more
> > > > http://thinkgeek.com/sf
> > > >
> _______________________________________________
> > > > [EMAIL PROTECTED]
> > > > To unsubscribe, use the last form field at:
> > > >
> > >
> >
>
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
> > > >
> > >
> > > --
> > >
> > >
> >
>
/------------------------------------+-------------------------\
> > > |Stephen J. Gowdy | SLAC,
> > > MailStop 34, |
> > > |http://www.slac.stanford.edu/~gowdy/ | 2575
> Sand
> > > Hill Road, |
> > > |http://calendar.yahoo.com/gowdy | Menlo
> Park
> > > CA 94025, USA |
> > > |EMail: [EMAIL PROTECTED] | Tel: +1
> 650
> > > 926 3144 |
> > >
> > >
> >
>
\------------------------------------+-------------------------/
> > >
> >
> >
> > __________________________________________________
> > Do You Yahoo!?
> > Sign up for SBC Yahoo! Dial - First Month Free
> > http://sbc.yahoo.com
> >
>
> --
>
>
/------------------------------------+-------------------------\
> |Stephen J. Gowdy | SLAC,
> MailStop 34, |
> |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand
> Hill Road, |
> |http://calendar.yahoo.com/gowdy | Menlo Park
> CA 94025, USA |
> |EMail: [EMAIL PROTECTED] | Tel: +1 650
> 926 3144 |
>
>
\------------------------------------+-------------------------/
>
__________________________________________________
Do You Yahoo!?
Sign up for SBC Yahoo! Dial - First Month Free
http://sbc.yahoo.com
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Gadgets, caffeine, t-shirts, fun stuff.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
