Hi Eric, On Friday 12 July 2002 9:12 am, you wrote:
> I've read the "HowTo" translated from German for this camera and tried > to follow all the instructions. I loaded usbcore, usb-uhci, > usb-storage, and sd_mod. I also recompiled the kernel with the > alternate uhci module and tried loading that in place of usb-uhci with > the same results. Both times when I turned on the camera connected to > the usb port on my Dell i8100 laptop the usb device was generally > recognized, but not assigned to a specific driver. I've included the > listing from dmesg below. Does anyone have advice for this? Thanks. I'm not sure about the 912, but my HP 618 has two different PC connection modes - "USB Disk Drive" and "Digita Device" - does your camera have a similar option, and if so, are you set to "USB Disk Drive"? Hope this helps... All the best, -- Alastair M. Robinson Email: [EMAIL PROTECTED] -- You know you've been hacking too long when... ...you dream you have to write device drivers for your refrigerator, washing machine, and other major household appliances before you can use them. ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Gadgets, caffeine, t-shirts, fun stuff. http://thinkgeek.com/sf _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
