You probably need to supply the contents of /proc/bus/usb/devices so people can guess what driver might work. You probably also want to get the 2.4.18-4 kernel from RH.
On Mon, 15 Jul 2002 [EMAIL PROTECTED] wrote: > Hi, > > I want to connect my SL5500G to my Linux Laptop over USB. > (I am using RHL 7.1 with the Kernel 2.4.2-2) > > When I put the SL5500G into the gradle I get the following messages in > /var/log/messages > > Jul 9 22:39:04 wil4 kernel: hub.c: USB new device connect on bus1/1, > assigned device number 3 > Jul 9 22:39:04 wil4 kernel: usb.c: USB device 3 (vend/prod > 0x4dd/0x8004) is not claimed by any active driver. > > Does't that mean I need a special sharp USB driver? > What is device name for the pppd (ttyUSB0 doesn't work)? > > Thanks for your help. > > Markus Wild > > > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > _______________________________________________ > [EMAIL PROTECTED] > To unsubscribe, use the last form field at: > https://lists.sourceforge.net/lists/listinfo/linux-usb-users > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
