I've been trying for hours to get a USB device recognized. It's a Canon
Multipass F50. Vendor = 0x04a9 Product = 0x2610. I have a driver for
the printer part that should work (Canon S630 Compat), but, I can not
for the life of my access the printer via. /dev/usb/lp0
I get a "No such device" error when I attempt to cat /dev/usb/lp0
/var/log/messages shows this:
Jul 23 12:06:27 mirkwood kernel: hub.c: USB new device connect on
bus1/2/1, assigned device number 6
Jul 23 12:06:27 mirkwood kernel: usb.c: USB device 6 (vend/prod
0x4a9/0x2610) is not claimed by any active driver.
Jul 23 12:06:27 mirkwood /etc/hotplug/usb.agent: ... no modules for USB
product
4a9/2610/506
usbview reports:
MultiPASS F50
Manufacturer: Canon Inc.
Serial Number: 121CQ4DH
Speed: 12Mb/s (full)
USB Version: 1.10
Device Class: 00(>ifc )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 64
Number of Configurations: 1
Vendor Id: 04a9
Product Id: 2610
Revision Number: 5.06
Config Number: 1
Number of Interfaces: 1
Attributes: c0
MaxPower Needed: 2mA
Interface Number: 0
Name: (none)
Alternate Number: 0
Class: ff(vend.)
Sub Class: 0
Protocol: 0
Number of Endpoints: 3
Endpoint Address: 01
Direction: out
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
Endpoint Address: 82
Direction: in
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
Endpoint Address: 83
Direction: in
Attribute: 3
Type: Int.
Max Packet Size: 64
Interval: 100ms
Modules loaded (lsmod):
Module Size Used by Not tainted
printer 5632 0 (unused)
lp 6912 0 (autoclean)
joydev 7232 0 (unused)
hid 18816 0 (unused)
usb-uhci 20708 0 (unused)
usbcore 48032 1 [printer hid usb-uhci]
ntfs 48544 0 (unused)
emu10k1 55712 0
sound 52876 0 [emu10k1]
ac97_codec 9568 0 [emu10k1]
soundcore 3236 7 [emu10k1 sound]
isa-pnp 27432 0 (unused)
parport_pc 25704 1
parport 21728 1 [lp parport_pc]
3c59x 24648 1
ohci1394 14912 0 (unused)
ieee1394 23528 0 [ohci1394]
keybdev 1664 0 (unused)
input 3072 0 [joydev hid keybdev]
Can you please help?? Or, point me in the right direction?
Thanks!
(I'm using Debian Woody 3.0, kernel 2.4.18-bf2.4)
David
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
