Hi,
USB storage seems to be broken on 2.5.x (I am currently trying 2.5.29).
My system is a "legacy-free" Sony Vaio laptop (no CDROM or floppy, just
USB and FireWire ports). The following information can be found below:
- Output of lspci -v
- Content of /proc/bus/usb/devices
- The IMO important parts of dmesg
- kernel configuration
- complete dmesg
According to the Linux-USB FAQ I've tried with and without Plug&Play enabled
in the BIOS but it didn't make a difference. Please let me know what other
information is needed to solve this problem.
TIA, Oliver
---------------------------------------------------------------------------
Output of lspci -v:
00:00.0 Host bridge: Intel Corp. 82815 815 Chipset Host Bridge and Memory
Controller Hub (rev 11)
Subsystem: Sony Corporation: Unknown device 80e0
Flags: bus master, fast devsel, latency 0
Capabilities: [88] #09 [f205]
00:02.0 VGA compatible controller: Intel Corp. 82815 CGC [Chipset Graphics
Controller] (rev 11) (prog-if 00 [VGA])
Subsystem: Sony Corporation: Unknown device 80e0
Flags: bus master, 66Mhz, medium devsel, latency 0, IRQ 9
Memory at f8000000 (32-bit, prefetchable) [size=64M]
Memory at f4000000 (32-bit, non-prefetchable) [size=512K]
Capabilities: [dc] Power Management version 2
00:1e.0 PCI bridge: Intel Corp. 82801BAM/CAM PCI Bridge (rev 03) (prog-if 00
[Normal decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00003000-00003fff
Memory behind bridge: f4100000-f41fffff
00:1f.0 ISA bridge: Intel Corp. 82801BAM ISA Bridge (LPC) (rev 03)
Flags: bus master, medium devsel, latency 0
00:1f.1 IDE interface: Intel Corp. 82801BAM IDE U100 (rev 03) (prog-if 80
[Master])
Subsystem: Sony Corporation: Unknown device 80e0
Flags: bus master, medium devsel, latency 0
I/O ports at 1800 [size=16]
00:1f.2 USB Controller: Intel Corp. 82801BA/BAM USB (Hub (rev 03) (prog-if
00 [UHCI])
Subsystem: Sony Corporation: Unknown device 80e0
Flags: bus master, medium devsel, latency 0, IRQ 9
I/O ports at 1820 [size=32]
00:1f.3 SMBus: Intel Corp. 82801BA/BAM SMBus (rev 03)
Subsystem: Sony Corporation: Unknown device 80e0
Flags: medium devsel, IRQ 9
I/O ports at 1810 [size=16]
00:1f.4 USB Controller: Intel Corp. 82801BA/BAM USB (Hub (rev 03) (prog-if
00 [UHCI])
Subsystem: Sony Corporation: Unknown device 80e0
Flags: bus master, medium devsel, latency 0, IRQ 9
I/O ports at 2400 [size=32]
00:1f.5 Multimedia audio controller: Intel Corp. 82801BA/BAM AC'97 Audio
(rev 03)
Subsystem: Sony Corporation: Unknown device 80e0
Flags: bus master, medium devsel, latency 0, IRQ 9
I/O ports at 1c00 [size=256]
I/O ports at 1840 [size=64]
00:1f.6 Modem: Intel Corp. 82801BA/BAM AC'97 Modem (rev 03) (prog-if 00
[Generic])
Subsystem: Sony Corporation: Unknown device 80e0
Flags: medium devsel, IRQ 9
I/O ports at 2000 [size=256]
I/O ports at 1880 [size=128]
01:00.0 FireWire (IEEE 1394): Texas Instruments TSB43AA22 IEEE-1394
Controller (PHY/Link Integrated) (rev 02) (prog-if 10 [OHCI])
Subsystem: Sony Corporation: Unknown device 80e0
Flags: medium devsel, IRQ 9
Memory at f4101000 (32-bit, non-prefetchable) [disabled] [size=2K]
Memory at f4104000 (32-bit, non-prefetchable) [disabled] [size=16K]
Capabilities: [44] Power Management version 2
01:02.0 CardBus bridge: Ricoh Co Ltd RL5c475 (rev 80)
Subsystem: Sony Corporation: Unknown device 80e0
Flags: bus master, medium devsel, latency 168, IRQ 9
Memory at f4102000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=01, secondary=02, subordinate=05, sec-latency=176
I/O window 0: 00000000-00000003
I/O window 1: 00000000-00000003
16-bit legacy interface ports at 0001
01:08.0 Ethernet controller: Intel Corp. 82801BA/BAM/CA/CAM Ethernet
Controller (rev 03)
Flags: bus master, medium devsel, latency 66, IRQ 9
Memory at f4100000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 3000 [size=64]
Capabilities: [dc] Power Management version 2
---------------------------------------------------------------------------
/proc/bus/usb/devices contains the following:
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 12/900 us ( 1%), #Int= 1, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.05
S: Manufacturer=Linux 2.5.29 uhci-hcd
S: Product=Intel Corp. 82801BA/BAM USB (Hub #2)
S: SerialNumber=00:1f.4
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=054c ProdID=0056 Rev= 1.80
S: Manufacturer=Sony
S: Product=USB Memory Stick Slot
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=05 Prot=00 Driver=(none)
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=1ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.05
S: Manufacturer=Linux 2.5.29 uhci-hcd
S: Product=Intel Corp. 82801BA/BAM USB (Hub #1)
S: SerialNumber=00:1f.2
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
---------------------------------------------------------------------------
The following messages appear when I boot the system (the complete dmesg can
be found at the end of this message):
[...]
usb-storage: USB IRQ received for device on host 0
usb-storage: -- IRQ data length is 2
usb-storage: -- IRQ state is 0
usb-storage: -- Interrupt Status (0x0, 0x0)
usb-storage: Call to usb_stor_control_msg() returned 12
kernel BUG at transport.c:351!
invalid operand: 0000
CPU: 0
EIP: 0010:[<c020f89e>] Not tainted
EFLAGS: 00010283
eax: 00000100 ebx: 00000038 ecx: c02c1ac0 edx: ffffffff
esi: c7d33a00 edi: 00000000 ebp: c7d33a00 esp: c7d03f28
ds: 0018 es: 0018 ss: 0018
Process usb-storage-0 (pid: 21, threadinfo=c7d02000 task=c7e3a580)
Stack: 0000000c c7d33400 00000011 c02103e3 c7d33a00 c7d33a00 00000000
c7d33400
c7d33a00 c020fddb c7d33a00 c7d33400 00000002 c021293b c02c38e0
00000012
00000000 00000000 00000000 c7d33a00 00000000 c7d33400 c0301e0c
c020f415
Call Trace: [<c02103e3>] [<c020fddb>] [<c021293b>] [<c020f415>] [<c021129a>]
[<c0106f5d>] [<c0210f10>] [<c0105636>] [<c0210f10>]
Code: 0f 0b 5f 01 c7 66 2d c0 89 d8 5b 5e 5f c3 8d 74 26 00 8b 44
[...]
usb-storage: command_abort() called
usb-storage: usb_stor_abort_transport called
usb-storage: queuecommand() called
kernel BUG at scsiglue.c:150!
invalid operand: 0000
CPU: 0
EIP: 0010:[<c020e449>] Not tainted
EFLAGS: 00010002
eax: 00000003 ebx: c7d33400 ecx: 00000001 edx: 00000001
esi: c7d33a00 edi: c7d33a00 ebp: c7d01f2c esp: c7d01ef4
ds: 0018 es: 0018 ss: 0018
Process scsi_eh_0 (pid: 22, threadinfo=c7d00000 task=c7e3aac0)
Stack: c7d00000 00000292 c01e2aac c7d33a00 c01e2590 c7d33600 00000000
00000000
00000000 c7d01f38 c7d01f38 00000046 00000000 c01128b7 00000000
00000000
00000000 c7d01f38 c7d01f38 c7d33a00 c7d33400 c7d33a00 c7d33a00
c7d33a58
Call Trace: [<c01e2aac>] [<c01e2590>] [<c01128b7>] [<c01e28f5>] [<c01e3325>]
[<c01e3a26>] [<c0106f5d>] [<c0105636>] [<c01e3910>]
Code: 0f 0b 96 00 fd 65 2d c0 8b 44 24 10 8d 8b 7c 01 00 00 89 86
---------------------------------------------------------------------------
The kernel configuration is as follows:
#
CONFIG_X86=y
CONFIG_ISA=y
CONFIG_UID16=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# General setup
CONFIG_NET=y
CONFIG_SYSVIPC=y
CONFIG_SYSCTL=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODVERSIONS=y
CONFIG_KMOD=y
#
# Processor type and features
#
CONFIG_MPENTIUMIII=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_TSC=y
CONFIG_X86_GOOD_APIC=y
CONFIG_X86_USE_PPRO_CHECKSUM=y
CONFIG_PREEMPT=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_NOHIGHMEM=y
CONFIG_HAVE_DEC_LOCK=y
#
# Power management options (ACPI, APM)
#
#
# ACPI Support
#
CONFIG_ACPI=y
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_FAN=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_THERMAL=y
CONFIG_ACPI_DEBUG=y
CONFIG_PM=y
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_NAMES=y
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=y
CONFIG_CARDBUS=y
#
# Executable file formats
#
CONFIG_KCORE_ELF=y
CONFIG_BINFMT_AOUT=y
CONFIG_BINFMT_ELF=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_LOOP=m
#
# ATA/ATAPI/MFM/RLL device support
#
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IDEDMA=y
CONFIG_BLK_DEV_IDE_TCQ=y
CONFIG_BLK_DEV_IDE_TCQ_DEFAULT=y
CONFIG_BLK_DEV_IDE_TCQ_DEPTH=32
CONFIG_BLK_DEV_PIIX=y
CONFIG_IDEDMA_AUTO=y
#
# SCSI device support
#
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SD_EXTRA_DEVS=10
CONFIG_BLK_DEV_SR=y
CONFIG_SR_EXTRA_DEVS=2
CONFIG_CHR_DEV_SG=y
CONFIG_SCSI_CONSTANTS=y
#
# SCSI low-level drivers
#
#
# PCMCIA SCSI adapter support
#
#
# Old non-SCSI/ATAPI CD-ROM drives
#
#
# Multi-device support (RAID and LVM)
#
#
# Networking options
#
CONFIG_PACKET=y
CONFIG_NETFILTER=y
CONFIG_NETFILTER_DEBUG=y
CONFIG_UNIX=y
CONFIG_INET=y
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
CONFIG_DUMMY=m
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_NET_PCI=y
CONFIG_E100=m
CONFIG_NET_POCKET=y
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_PCI_HERMES=m
CONFIG_PCMCIA_HERMES=m
CONFIG_NET_WIRELESS=y
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
#
# Input device support
#
CONFIG_SOUND_GAMEPORT=y
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
#
# Serial drivers
#
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
#
# Mice
#
CONFIG_PSMOUSE=y
#
# Watchdog Cards
#
CONFIG_INTEL_RNG=y
CONFIG_SONYPI=y
#
# Ftape, the floppy tape device driver
#
CONFIG_AGP=y
CONFIG_AGP_I810=y
CONFIG_DRM=y
CONFIG_DRM_I810=y
#
# File systems
#
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_PROC_FS=y
CONFIG_DEVPTS_FS=y
CONFIG_EXT2_FS=y
#
# Partition Types
#
CONFIG_MSDOS_PARTITION=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
#
# Console drivers
#
CONFIG_VGA_CONSOLE=y
#
# Sound
#
CONFIG_SOUND=y
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=y
CONFIG_SND_SEQUENCER=y
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
CONFIG_SND_PCM_OSS=y
CONFIG_SND_SEQUENCER_OSS=y
#
# PCI devices
#
CONFIG_SND_INTEL8X0=y
#
# USB support
#
CONFIG_USB=y
CONFIG_USB_DEBUG=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_UHCI_HCD_ALT=y
CONFIG_USB_STORAGE=y
CONFIG_USB_STORAGE_DEBUG=y
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_HP8200e=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
#
# USB Serial Converter support
#
#
# Security options
#
CONFIG_SECURITY_CAPABILITIES=y
---------------------------------------------------------------------------
The complete output of dmesg:
Linux version 2.5.29 ([EMAIL PROTECTED]) (gcc version 2.96 20000731 (Red
Hat Linux 7.3 2.96-110)) #1 Tue Jul 30 10:40:22 CEST 2002
Video mode to be used for restore is ffff
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000c0000 - 00000000000cc000 (reserved)
BIOS-e820: 00000000000d8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000007cf0000 (usable)
BIOS-e820: 0000000007cf0000 - 0000000007cff000 (ACPI data)
BIOS-e820: 0000000007cff000 - 0000000007d00000 (ACPI NVS)
BIOS-e820: 0000000007d00000 - 0000000007e80000 (usable)
BIOS-e820: 0000000007e80000 - 0000000008000000 (reserved)
BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
126MB LOWMEM available.
On node 0 totalpages: 32384
zone(0): 4096 pages.
zone(1): 28288 pages.
zone(2): 0 pages.
ACPI: RSDP (v000 SONY ) @ 0x000f6c70
ACPI: RSDT (v001 SONY U1 08194.00773) @ 0x07cfa38a
ACPI: FADT (v001 SONY U1 08194.00773) @ 0x07cfef64
ACPI: BOOT (v001 SONY U1 08194.00773) @ 0x07cfefd8
Sony Vaio laptop detected.
Kernel command line: ro root=/dev/hda2
Initializing CPU#0
Detected 844.689 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1667.07 BogoMIPS
Memory: 125288k/129536k available (1610k kernel code, 3792k reserved, 470k
data, 204k init, 0k highmem)
Security Scaffold v1.0.0 initialized
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Before vendor init, caps: 0383f9ff 00000000 00000000, vendor = 0
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: After vendor init, caps: 0383f9ff 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel 00/08 stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
PCI: PCI BIOS revision 2.10 entry at 0xfd9b0, last bus=1
PCI: Using configuration type 1
ACPI: Subsystem revision 20020725
tbxface-0099 [03] Acpi_load_tables : ACPI Tables successfully loaded
Parsing
Methods:...................................................................
...........................................................................
.......................................................
Table [DSDT] - 573 Objects with 54 Devices 197 Methods 17 Regions
ACPI Namespace successfully loaded at root c034da3c
evxfevnt-0076 [04] Acpi_enable : Transition to ACPI mode
successful
Executing all Device _STA and_INI
methods:.....................................................
53 Devices found containing: 53 _STA, 2 _INI methods
Completing Region/Field/Buffer/Package
initialization:............................................................
.........
Initialized 12/17 Regions 5/5 Fields 26/27 Buffers 26/27 Packages (573
nodes)
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: System [ACPI] (supports S0 S3 S4 S5)
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
Unknown bridge resource 2: assuming transparent
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
pci_bind-0191 [05] acpi_pci_bind : Device 00:00:01.00 not present in
PCI namespace
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
ACPI: Embedded Controller [EC0] (gpe 28)
ACPI: PCI Interrupt Link [LNKA] (IRQs *9)
ACPI: PCI Interrupt Link [LNKB] (IRQs *9)
pci_link-0218 [14] acpi_pci_link_get_curr: Blank IRQ resource
ACPI: PCI Interrupt Link [LNKC] (IRQs 9, disabled)
pci_link-0218 [14] acpi_pci_link_get_curr: Blank IRQ resource
ACPI: PCI Interrupt Link [LNKD] (IRQs 9, disabled)
ACPI: PCI Interrupt Link [LNKE] (IRQs *9)
ACPI: PCI Interrupt Link [LNKH] (IRQs *9)
usb.c: registered new driver usbfs
usb.c: registered new driver hub
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
PCI: Using ACPI for IRQ routing
PCI: if you experience problems, try using option 'pci=noacpi'
SBF: Simple Boot Flag extension found and enabled.
SBF: Setting boot flags 0x1
Starting kswapd
BIO: pool of 256 setup, 14Kb (56 bytes/bio)
biovec: init pool 0, 1 entries, 12 bytes
biovec: init pool 1, 4 entries, 48 bytes
biovec: init pool 2, 16 entries, 192 bytes
biovec: init pool 3, 64 entries, 768 bytes
biovec: init pool 4, 128 entries, 1536 bytes
biovec: init pool 5, 256 entries, 3072 bytes
Capability LSM initialized
ACPI: AC Adapter [ACAD] (on-line)
ACPI: Battery Slot [BAT1] (battery present)
ACPI: Lid Switch [LID]
ACPI: Power Button (CM) [PWRB]
ACPI: Processor [CPU0] (supports C1 C2, 2 performance states, 8 throttling
states)
ACPI: Thermal Zone [ATF0] (53 C)
pty: 256 Unix98 ptys configured
sonypi: Sony Programmable I/O Controller Driver v1.13.
sonypi: detected type2 model, verbose = off, fnkeyinit = off, camera = off,
compat = off, nojogdial = off
sonypi: enabled at irq=11, port1=0x1080, port2=0x1084
sonypi: device allocated minor is 63
i810_rng hardware driver 0.9.8 loaded
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 93M
agpgart: agpgart: Detected an Intel i815 Chipset.
agpgart: detected 4MB dedicated video ram.
agpgart: AGP aperture is 64M @ 0xf8000000
[drm] AGP 0.99 on Intel i810 @ 0xf8000000 64MB
[drm] Initialized i810 1.2.1 20020211 on minor 0
block: 256 slots per queue, batch=32
Floppy drive(s): fd0 is 1.44M
floppy0: no floppy controllers found
ATA/ATAPI device driver v7.0.0
ATA: PCI bus speed 33.3MHz
ATA: Intel Corp. 82801BAM IDE U100, PCI slot 00:1f.1
ATA: chipset rev.: 3
ATA: non-legacy mode: IRQ probe delayed
PIIX: Intel Corp. 82801BAM IDE U100 UDMA100 controller on pci00:1f.1
PCI: Setting latency timer of device 00:1f.1 to 64
ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio
PCI: Setting latency timer of device 00:1f.1 to 64
ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:pio, hdd:pio
hda: HITACHI_DK23BA-20, DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: 39070080 sectors w/2048KiB Cache, CHS=38760/16/63, UDMA(66)
hda: [PTBL] [2432/255/63] hda1 hda2 hda3
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
Linux Kernel Card Services 3.1.22
options: [pci] [cardbus] [pm]
uhci-hcd.c: USB Universal Host Controller Interface driver v2.0
PCI: Setting latency timer of device 00:1f.2 to 64
hcd-pci.c: uhci-hcd @ 00:1f.2, Intel Corp. 82801BA/BAM USB (Hub #1)
hcd-pci.c: irq 9, io base 00001820
hcd.c: new USB bus registered, assigned bus number 1
Yenta IRQ list 04b8, PCI irq9
Socket status: 30000410
uhci-hcd.c: detected 2 ports
hcd.c: 00:1f.2 root hub device address 1
usb.c: new device strings: Mfr=3, Product=2, SerialNumber=1
Product: Intel Corp. 82801BA/BAM USB (Hub #1)
Manufacturer: Linux 2.5.29 uhci-hcd
SerialNumber: 00:1f.2
hub.c: USB hub found at /
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface c7e78160
usb.c: kusbd: /sbin/hotplug add 1
usb.c: kusbd policy returned 0xfffffffe
PCI: Setting latency timer of device 00:1f.4 to 64
hcd-pci.c: uhci-hcd @ 00:1f.4, Intel Corp. 82801BA/BAM USB (Hub #2)
hcd-pci.c: irq 9, io base 00002400
hcd.c: new USB bus registered, assigned bus number 2
uhci-hcd.c: detected 2 ports
hcd.c: 00:1f.4 root hub device address 1
usb.c: new device strings: Mfr=3, Product=2, SerialNumber=1
Product: Intel Corp. 82801BA/BAM USB (Hub #2)
Manufacturer: Linux 2.5.29 uhci-hcd
SerialNumber: 00:1f.4
hub.c: USB hub found at /
hub.c: 2 ports detected
hub.c: standalone hub
hub.c: ganged power switching
hub.c: global over-current protection
hub.c: Port indicators are not supported
hub.c: power on to power good time: 2ms
hub.c: hub controller current requirement: 0mA
hub.c: port removable status: RR
hub.c: local power source is good
hub.c: no over-current condition exists
hub.c: enabling power on all ports
usb.c: hub driver claimed interface c7e78260
usb.c: kusbd: /sbin/hotplug add 1
usb.c: kusbd policy returned 0xfffffffe
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
Advanced Linux Sound Architecture Driver Version 0.9.0rc2 (Wed Jun 19
08:56:25 2002 UTC).
PCI: Setting latency timer of device 00:1f.5 to 64
uhci-hcd.c: 1820: suspend_hc
intel8x0: clocking to 48000
ALSA device list:
#0: Intel 82801BA-ICH2 at 0x1c00, irq 9
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
hub.c: port 1, portstatus 101, change 1, 12 Mb/s
hub.c: hub / port 1 connection change
hub.c: hub / port 1, portstatus 101, change 1, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
hub.c: port 1, portstatus 101, change 0, 12 Mb/s
uhci-hcd.c: 2400: suspend_hc
uhci-hcd.c: 2400: wakeup_hc
hub.c: port 1, portstatus 103, change 0, 12 Mb/s
hub.c: new USB device 00:1f.4-1, assigned address 2
usb.c: new device strings: Mfr=1, Product=2, SerialNumber=0
Product: USB Memory Stick Slot
Manufacturer: Sony
usb-storage: act_altsetting is 0
usb-storage: id_index calculated to be: 83
usb-storage: Array length appears to be: 92
usb-storage: USB Mass Storage device detected
usb-storage: Endpoints: In: 0xc7d091e0 Out: 0xc7d091f4 Int: 0xc7d09208
(Period 1)
usb-storage: New GUID 054c00560000000000000000
usb-storage: Transport: Control/Bulk/Interrupt
usb-storage: Protocol: 8070i
usb-storage: Allocating usb_ctrlrequest
usb-storage: Allocating URB
usb-storage: Allocating IRQ for CBI transport
usb-storage: usb_submit_urb() returns 0
usb-storage: *** thread sleeping.
scsi0 : SCSI emulation for USB Mass Storage devices
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 24 00 00 00 00 00 00 00
usb-storage: USB IRQ received for device on host 0
usb-storage: -- IRQ data length is 2
usb-storage: -- IRQ state is 0
usb-storage: -- Interrupt Status (0x0, 0x0)
usb-storage: Call to usb_stor_control_msg() returned 12
usb-storage: usb_stor_transfer_partial(): xfer 36 bytes
usb-storage: USB IRQ received for device on host 0
usb-storage: -- IRQ data length is 2
usb-storage: -- IRQ state is 0
usb-storage: -- Interrupt Status (0x29, 0x0)
usb-storage: -- not a command-completion IRQ
usb-storage: usb_stor_bulk_msg() returned 0 xferred 36/36
usb-storage: usb_stor_transfer_partial(): transfer complete
usb-storage: CBI data stage result is 0x0
usb-storage: Got interrupt data (0x0, 0x0)
usb-storage: Fixing INQUIRY data to show SCSI rev 2
usb-storage: scsi cmd done, result=0x0
usb-storage: *** thread sleeping.
usb-storage: queuecommand() called
usb-storage: *** thread awakened.
usb-storage: Command INQUIRY (6 bytes)
usb-storage: 12 00 00 00 38 00 00 00 00 00 00 00
usb-storage: USB IRQ received for device on host 0
usb-storage: -- IRQ data length is 2
usb-storage: -- IRQ state is 0
usb-storage: -- Interrupt Status (0x0, 0x0)
usb-storage: Call to usb_stor_control_msg() returned 12
kernel BUG at transport.c:351!
invalid operand: 0000
CPU: 0
EIP: 0010:[<c020f89e>] Not tainted
EFLAGS: 00010283
eax: 00000100 ebx: 00000038 ecx: c02c1ac0 edx: ffffffff
esi: c7d33a00 edi: 00000000 ebp: c7d33a00 esp: c7d03f28
ds: 0018 es: 0018 ss: 0018
Process usb-storage-0 (pid: 21, threadinfo=c7d02000 task=c7e3a580)
Stack: 0000000c c7d33400 00000011 c02103e3 c7d33a00 c7d33a00 00000000
c7d33400
c7d33a00 c020fddb c7d33a00 c7d33400 00000002 c021293b c02c38e0
00000012
00000000 00000000 00000000 c7d33a00 00000000 c7d33400 c0301e0c
c020f415
Call Trace: [<c02103e3>] [<c020fddb>] [<c021293b>] [<c020f415>] [<c021129a>]
[<c0106f5d>] [<c0210f10>] [<c0105636>] [<c0210f10>]
Code: 0f 0b 5f 01 c7 66 2d c0 89 d8 5b 5e 5f c3 8d 74 26 00 8b 44
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 204k freed
Adding 522104k swap on /dev/hda3. Priority:-1 extents:1
usb-storage: command_abort() called
usb-storage: usb_stor_abort_transport called
usb-storage: queuecommand() called
kernel BUG at scsiglue.c:150!
invalid operand: 0000
CPU: 0
EIP: 0010:[<c020e449>] Not tainted
EFLAGS: 00010002
eax: 00000003 ebx: c7d33400 ecx: 00000001 edx: 00000001
esi: c7d33a00 edi: c7d33a00 ebp: c7d01f2c esp: c7d01ef4
ds: 0018 es: 0018 ss: 0018
Process scsi_eh_0 (pid: 22, threadinfo=c7d00000 task=c7e3aac0)
Stack: c7d00000 00000292 c01e2aac c7d33a00 c01e2590 c7d33600 00000000
00000000
00000000 c7d01f38 c7d01f38 00000046 00000000 c01128b7 00000000
00000000
00000000 c7d01f38 c7d01f38 c7d33a00 c7d33400 c7d33a00 c7d33a00
c7d33a58
Call Trace: [<c01e2aac>] [<c01e2590>] [<c01128b7>] [<c01e28f5>] [<c01e3325>]
[<c01e3a26>] [<c0106f5d>] [<c0105636>] [<c01e3910>]
Code: 0f 0b 96 00 fd 65 2d c0 8b 44 24 10 8d 8b 7c 01 00 00 89 86
<6>note: scsi_eh_0[22] exited with preempt_count 1
cs: IO port probe 0x0c00-0x0cff: clean.
cs: IO port probe 0x0100-0x04ff: excluding 0x170-0x177 0x370-0x377
0x4d0-0x4d7
cs: IO port probe 0x0a00-0x0aff: clean.
cs: memory probe 0xa0000000-0xa0ffffff: clean.
hermes.c: 5 Apr 2002 David Gibson <[EMAIL PROTECTED]>
orinoco.c 0.11b (David Gibson <[EMAIL PROTECTED]> and others)
orinoco_cs.c 0.11b (David Gibson <[EMAIL PROTECTED]> and others)
eth0: Station identity 001f:0001:0008:000a
eth0: Looks like a Lucent/Agere firmware version 8.10
eth0: Ad-hoc demo mode supported
eth0: IEEE standard IBSS ad-hoc mode supported
eth0: WEP supported, 104-bit key
eth0: MAC address 00:02:2D:2E:73:D8
eth0: Station name "HERMES I"
eth0: ready
eth0: index 0x01: Vcc 5.0, irq 3, io 0x0100-0x013f
-------------------------------------------------------
This sf.net email is sponsored by: Dice - The leading online job board
for high-tech professionals. Search and apply for tech jobs today!
http://seeker.dice.com/seeker.epl?rel_code=31
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
