Hi Brad
>
> On Mon, 12 Aug 2002 21:54, Morten Holm Larsen wrote:
> <snip>
> > I have now try kernel-2.4.19 and kernel-2.5.31 and /dev/usb/hiddev is
> > still not able.
> I don't understand what you mean by "not able". What are you trying to do,
> what results are you expecting, and what errors are you seeing? What tools
> are you using?
There is no node, I thought the device driver create the node.
Or shell I type: mknod 82 /dev/usb/hiddev ?
>
> > my .config for kernel-2.5.31 is
> > CONFIG_USB_HID=m
> > # CONFIG_USB_HIDINPUT is not set
> > # CONFIG_HID_FF is not set
> > # CONFIG_HID_PID is not set
> > # CONFIG_LOGITECH_FF is not set
> > CONFIG_USB_HIDDEV=y
> Looks good if you want to use /dev/usb/hiddev interface.
>
> > I have also tray to put
> >
> > vendor 0x04b4 product 0x0102 module hiddev
> > vendor 0x04b4 product 0x1000 module hiddev
> >
> > i to /etc/usbmgr/usbmgr.conf (There is non man-pages to usbmgr)
> You really should get rid of that tool, but no matter for now.
>
> > lsmod say:
> > Module Size Used by Not tainted
> > hid 17376 0 (unused)
> What does /proc/bus/usb/devices show?
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 33/900 us ( 4%), #Int= 3, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.05
S: Manufacturer=Linux 2.5.31 uhci-hcd
S: Product=Intel Corp. 82371SB PIIX3 USB [Natoma/Triton II]
S: SerialNumber=00:07.2
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 7
D: Ver= 1.01 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=05e3 ProdID=0604 Rev= 0.11
S: Product=USB Hub
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 3
D: Ver= 1.10 Cls=09(hub ) Sub=01 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=04b4 ProdID=1000 Rev= 0.01
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 98mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=01 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 1 Ivl=255ms
T: Bus=01 Lev=03 Prnt=03 Port=02 Cnt=01 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=04b4 ProdID=0102 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=01 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
I: If#= 1 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=(none)
E: Ad=82(I) Atr=03(Int.) MxPS= 4 Ivl=10ms
> What does /proc/bus/usb/drivers show?
No such file
/morten
--
--------------------------------------------------------------------------
Morten Holm Larsen
(o> M.Sc.E.E stud.
//\ Phone +45 98129195
V_/_ Email [EMAIL PROTECTED]
URL www.kom.auc.dk/~mhla00
Vi h�rs.....skall inom kort till heling�r o k�pa �l.
--------------------------------------------------------------------------
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
