Hi,
I have a problem with my SchlumbergerSema Reflex USB Lite Smart card reader:
http://www.reflexreaders.com/Products/Reflex_USB_Lite/RUSBlite_Specs/rusblite_specs.html
I always get the usb_control/bulk_msg: timeout message, both at boot and when
plugging in the device. Does not matter which of the two ports I use.
The USB device works fine under Windows98 on the same computer.
I am using SuSE 8.0 and have no problems with my other USB devices like
scanner or mouse. So there is nothing wrong with the device nor USB support
for other devices.
I know that there were some issues on SuSE 8.0 and USB timeout but I
implemented the fixes according to the instructions on the SuSE support
mailing list without any improvement. I do not think this was the issue anyway
since my other devices worked fine all the time.
Thanks for any help on this matter
Mikael Karlsson
# dmesg
Linux version 2.4.18-4GB ([EMAIL PROTECTED]) (gcc version 2.95.3 20010315
(SuSE)) #1 Wed Mar 27 13:57:05 UTC 2002
..
# dmesg | egrep "(usb|hub)"
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 14:22:01 Mar 27 2002
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0x1800, IRQ 9
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
hub.c: USB new device connect on bus1/1, assigned device number 2
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb.c: unable to get descriptor
usb.c: unable to get device 2 configuration (error=-110)
hub.c: USB new device connect on bus1/1, assigned device number 3
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb_control/bulk_msg: timeout
usb.c: unable to get descriptor
usb.c: unable to get device 3 configuration (error=-110)
# lspci -v
..
00:07.2 USB Controller: Intel Corp. 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if
00 [UHCI])
Flags: bus master, medium devsel, latency 64, IRQ 9
I/O ports at 1800 [size=32]
..
-------------------------------------------------------
This sf.net email is sponsored by: Dice - The leading online job board
for high-tech professionals. Search and apply for tech jobs today!
http://seeker.dice.com/seeker.epl?rel_code1
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
