Hello, I'm trying to mount a NEX II MP3 player (Compact Flash based) as a scsi drive, but I'm obviously doing something wrong. I have the usb-storage module loaded, and compiled with the verbose debug option.
When I plug the USB connector into the unit, I get lots of useful looking information in /var/log/debug. My problem is I don't know what I'm doing :-) It looks like it has recongized the unit. I am led to believe that all I need to do is mount the proper scsi device but I've tried most all the sda and sdb devices and they all say "mount: /dev/sda1 is not a valid block device". I'm probably missing something obvious. Any help is greatly appreciated. Bob Snyder -------------------- My system: Slackware 8 with kernel 2.4.19 Some useful information: $ cat /proc/modules usb-storage 43568 0 (unused) scsi_mod 81744 1 [usb-storage] tuner 8512 0 (autoclean) (unused) bttv 68368 0 videodev 4000 2 [bttv] visor 10400 3 usbserial 17024 0 [visor] usb-uhci 21552 0 (unused) ide-cd 27168 0 (autoclean) cdrom 28960 0 (autoclean) [ide-cd] ds 6704 2 i82365 21520 2 pcmcia_core 36224 0 [ds i82365] apci97 14864 3 audiobuf 12352 3 [apci97] pnp 50304 3 [apci97] midi 30480 3 [apci97 pnp] ac97 8112 3 [apci97] soundbase 622320 3 [apci97 audiobuf pnp midi ac97] sndshield 10672 0 [apci97 audiobuf pnp midi ac97 soundbase] ppp_async 6576 0 (unused) ppp_generic 15936 0 [ppp_async] slhc 4672 0 [ppp_generic] vfat 9520 1 (autoclean) fat 29824 0 (autoclean) [vfat] The tail end of /var/log/debug: Aug 24 22:14:02 maytag kernel: hub.c: port 1, portstatus 101, change 1, 12 Mb/s Aug 24 22:14:02 maytag kernel: hub.c: port 1 connection change Aug 24 22:14:02 maytag kernel: hub.c: port 1, portstatus 101, change 1, 12 Mb/s Aug 24 22:14:02 maytag kernel: hub.c: port 1, portstatus 101, change 0, 12 Mb/s Aug 24 22:14:02 maytag last message repeated 3 times Aug 24 22:14:02 maytag kernel: hub.c: port 1, portstatus 103, change 0, 12 Mb/s Aug 24 22:14:03 maytag kernel: usb.c: kmalloc IF d9758b00, numif 1 Aug 24 22:14:03 maytag kernel: usb.c: new device strings: Mfr=1, Product=2, SerialNumber=3 Aug 24 22:14:03 maytag kernel: usb.c: USB device number 16 default language ID 0x409 Aug 24 22:14:03 maytag kernel: usb-storage: act_altsettting is 0 Aug 24 22:14:03 maytag kernel: usb-storage: id_index calculated to be: 4 Aug 24 22:14:03 maytag kernel: usb-storage: Array length appears to be: 66 Aug 24 22:14:03 maytag kernel: usb-storage: Vendor: Frontier Labs Aug 24 22:14:03 maytag kernel: usb-storage: Product: Nex II Digital Aug 24 22:14:03 maytag kernel: usb-storage: USB Mass Storage device detected Aug 24 22:14:03 maytag kernel: usb-storage: Endpoints: In: 0xcb8561d4 Out: 0xcb8561c0 Int: 0x00000000 (Period 0) Aug 24 22:14:03 maytag kernel: usb-storage: Found existing GUID 045154090000000000000001 Aug 24 22:14:03 maytag kernel: WARNING: USB Mass Storage data integrity not assured Aug 24 22:14:03 maytag kernel: USB Mass Storage device found at 16 Aug 24 22:14:03 maytag kernel: usb.c: usb-storage driver claimed interface d9758b00 Aug 24 22:14:03 maytag kernel: usb.c: kusbd: /sbin/hotplug add 16 Aug 24 22:14:03 maytag kernel: usb.c: kusbd policy returned 0xfffffffe Aug 24 22:14:03 maytag kernel: hub.c: port 2, portstatus 100, change 0, 12 Mb/s Aug 24 22:14:03 maytag kernel: hub.c: port 1, portstatus 103, change 0, 12 Mb/s Aug 24 22:14:03 maytag kernel: hub.c: port 2, portstatus 100, change 0, 12 Mb/s Aug 24 22:14:31 maytag kernel: hub.c: port 1, portstatus 100, change 3, 12 Mb/s Aug 24 22:14:31 maytag kernel: hub.c: port 1 connection change Aug 24 22:14:31 maytag kernel: hub.c: port 1, portstatus 100, change 3, 12 Mb/s Aug 24 22:14:31 maytag kernel: usb-storage: storage_disconnect() called Aug 24 22:14:31 maytag kernel: usb-storage: -- releasing main URB Aug 24 22:14:31 maytag kernel: usb-storage: -- usb_unlink_urb() returned -19 Aug 24 22:14:31 maytag kernel: usb.c: kusbd: /sbin/hotplug remove 16 Aug 24 22:14:31 maytag kernel: usb.c: kusbd policy returned 0xfffffffe Aug 24 22:14:31 maytag kernel: hub.c: port 2, portstatus 100, change 0, 12 Mb/s Aug 24 22:14:31 maytag kernel: hub.c: port 1, portstatus 100, change 2, 12 Mb/s Aug 24 22:14:31 maytag kernel: hub.c: port 1 enable change, status 100 Aug 24 22:14:31 maytag kernel: hub.c: port 2, portstatus 100, change 0, 12 Mb/s ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390 _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
